• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.571-597
• /
• 2016

A new unified design formula for calculating the composite compressive strength of the axially loaded circular concrete filled double steel tubular (CFDST) short and slender columns is presented in this paper. The formula is obtained from the analytic solution by using the limit equilibrium theory, the cylinder theory and the "Unified theory" under axial compression. Furthermore, the stability factor of CFDST slender columns is derived on the basis of the Perry-Robertson formula. This paper also reports the results of experiments and finite element analysis carried out on concrete filled double steel tubular columns, where the tested specimens include short and slender columns with different steel ratio and yield strength of inner tube; a new constitutive model for the concrete confined by both the outer and inner steel tube is proposed and incorporated in the finite element model developed. The comparisons among the finite element results, experimental results, and theoretical predictions show a good agreement in predicting the behavior and strength of the concrete filled steel tubular (CFST) columns with or without inner steel tubes. An important characteristic of the new formulas is that they provide a unified formulation for both the plain CFST and CFDST columns relating to the compressive strength or the stability bearing capacity and a set of design parameters.

• 에너지공학
• /
• 제25권4호
• /
• pp.198-206
• /
• 2016

자동차 표시연비는 국가적으로 에너지관리 지표로서 활용되며, 자동차 제작사의 기술개발을 유도하고, 소비자 차량구매 시 정보제공의 역할을 담당하고 있다. 하지만 정부의 표시연비가 체감연비와 상이하다는 소비자 불만이 지속되어 정부는 보다 정확한 표시연비 측정을 위해 미국의 5-cycle 시험방법을 국내 차량 기준에 맞게 재설정하여 도입하였다. 본래는 다양한 환경조건 및 주행패턴이 반영된 5개의 시험모드를 모두 주행함으로써 측정된 결과 값을 표시연비로 계산하는 방법이지만 소요되는 자원의 급격한 증가에 따른 충격을 완화하기 위하여 2개의 시험모드(도심(FTP-75 mode), 고속도로(HWFET mode))의 결과 값을 5-cycle 시험법으로 계산된 연비 값과 동등한 수준으로 산출하는 5-cycle 보정식을 사용하고 있다. 이 보정식은 2011년에 30대 차량의 5-cycle 시험방법으로 산출되었으나 최근 자동차 기술의 급속한 발전으로 인한 신형식 자동차에 대한 기존 5-cycle 보정식에 대한 검토가 필요할 것으로 판단되었다. 본 연구에서는 최근 기술이 적용된 14대의 신형식 자동차를 대상으로 기존과 동일한 시험 방법을 통해 시험모드별 연비 특성을 확인하고, 기존에 개발된 보정식과 차이를 분석한 결과 기존 시험 차량 결과와 큰 차이를 보이지 않았으며 보정식 또한 최대 1.5% 이내의 오차로써 기존 연비 보정식은 현재의 자동차 기술발전에 따른 개선도에 크게 영향을 받고 있지 않음을 알 수 있었다.

• Clinical and Experimental Otorhinolaryngology
• /
• 제11권4호
• /
• pp.301-308
• /
• 2018

Objectives. The age-based Cole formula has been employed for the estimation of endotracheal tube (ETT) size due to its ease of use, but may not appropriately consider growth rates among children. Child growth is assessed by calculating the body surface area (BSA). The association between the outer diameter of an appropriate uncuffed-endotracheal-tube (ETT-OD) and the BSA values of patients at 24-96 months of age was our primary outcome. Methods. Cole formula, BSA, age, height, weight and ultrasound measurement of subglottic-transverse-diameter were evaluated for correlations with correct uncuffed ETT-OD. The Cole formula, BSA, and ultrasound measurements were analyzed for estimation rates in all patients and age subgroups. The maximum allowed error for the estimation of ETT-OD was ${\leq}0.3mm$. Patients' tracheas were intubated with tubes chosen by Cole formula and correct ETT-OD values were determined using leak test. ETT exchange rates were recorded. Results. One-hundred twenty-seven patients were analyzed for the determination of estimation rates. Thirteen patients aged ${\geq}72months$ were intubated with cuffed ETT-OD of 8.4 mm and were accepted to need uncuffed ETT-OD >8.4 mm in order to be included in estimation rates, but excluded from correlations for size analysis. One-hundred fourteen patients were analyzed for correlations between correct ETT-OD (determined by the leak test) and outcome parameters. Cole formula, ultrasonography, and BSA had similar correct estimation rates. All three parameters had higher underestimation rates as age increased. Conclusion. The Cole formula, BSA, and ultrasonography had similar estimation rates in patients aged ${\geq}24$ to ${\leq}96months$. BSA had a correct estimation rate of 40.2% and may not be reliable in clinical practice to predict uncuffed-ETT-size.

• 한국가금학회지
• /
• 제8권1호
• /
• pp.31-36
• /
• 1981

This study was conducted to investigate how much total feed cost can be curtailed by the application of linear programming compared with the conventional hand calculating method in determining the feed formula in feed mill. Data were collected from a feed mill producing 19 different kinds of feed and having capacity of producing 5,000 tons of feed a month. According to the results of analysis, the least-cost feed formulation by linear programming showed a decrease of 4,793,172 won monthly in total feed cost as compared with the conventional hand calculating method. But, to confirm the results of this study, it is necessary to conduct further emperical studies.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2561-2567
• /
• 2018

The extension of DC battery backup time in the DC power supply system of nuclear power plants (NPPs) remains a challenge. The lead-acid battery is the most popular at present. And it is generally the most popular energy storage device. However, extension of backup time requires too much space. The lithium-ion battery has high energy density and advanced gravimetric and volumetric properties. The aim of this paper is development of the sizing formula of stationary lithium-ion batteries. The ongoing research activities and related industrial standards for stationary lithium-ion batteries are reviewed. Then, the lithium-ion battery sizing calculation formular is proposed for the establishment of industrial design standard which is essential for the design of stationary batteries of nuclear power plants. An example of calculating the lithium-ion battery capacity for a medium voltage UPS is presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.76-80
• /
• 2000

This paper describes a coordinate measuring technique based on optical triangulation using the two images. To overcome the defect of structured light system which measures coordinate point by point, light source is replaced by CCD camera. Pixels in CCD camera were considered as virtual light source. The overall geometry including two camera images is modeled. Using this geometry, the formula for calculating 3D coordinate of specified point is derived. In a word, the ray from a virtual light source was reflected on measuring point and the corresponding image point was made on the other image. Through the simulation result, validation of formula is verified. This method enables to acquire multiple points detection by photographing.

• 산업기술연구
• /
• 제26권B호
• /
• pp.43-51
• /
• 2006

Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.40-46
• /
• 2010

To protect press operator from the after-reach hazard, current Ministry of Labor Notification(MOLN) requires the use of a formula for calculating the safe distance away from the point of operation for locating press protective devices, Two Hand Control Devices(THCD) and Active Opto-Electronic Protective Devices(AOPD), on a power press. This formula is based on a same hand speed constant of 160cm/s. While EN standards use different hand speed constant for THCD and AOPD respectively. The objective of this study is to compare two guidelines on the hand speed constant published by MOLN and EN 692, also to propose a proper hand speed constant and validate it experimentally. As a experimental result, it could be known that hand speed constant of Ministry of Labor Notification should be improved as that of EN standards.

• 한국실내디자인학회논문집
• /
• 제8호
• /
• pp.32-38
• /
• 1996

The main focus of this paper is to apply contemporary aesthetics and psychological study with interior design analysis. Up to now, the methodology of interior design analysis has been developed toward a more qualitative way. By the virtue of the perception , congnition , and information theory, which oriented toward a quantitative approach, it became possible to investigate interior space analysis to a more objective and scientific ways. The purpose of this study is to investigate Modern and Post-Modern interior - architectural style with quantitative analytical method. The subjective interior critique studied by intuitive research will be transferred to scientific way by using quantitative formula . Savoye Villa and Guardiola House were selected as study model, because each architectural works ware regarded as masterpieces of Modern and Post-Modern style. These two oppositional style model will be distinguished with mathematical quantity by calculating Iave , Hmax, and Redundancy formula.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.