• Communications of the Korean Mathematical Society
• /
• v.11 no.1
• /
• pp.259-263
• /
• 1996

Let G be a topological group and X a G space. For a given nonequivariant vector bundle over X there does not always exist a G equivariant vector bundle structure. In this paper we find some sufficient conditions for nonequivariant real line bundles to have G equivariant vector bundle structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.40-50
• /
• 2002

A traditional agent was difficult to upgrade and to add MIB implementation code to it because most SNMP agent designs had MIB that was not a self-contained module. To solve this problem, we design the SNMP agent bundle composed of remotely uploadable SNMP agent core bundle and MIB Bundle Also, downloadable server bundle and user administration bundle is added to SNMP agent bundle to download MIB bundle from bundle server. By designing MB-MIB, we enable the network manager to monitor status of MIB bundle on managed devices. The network manager is allowed to install and upgrade the SNMP module or MIB remotely on line. This is the major benefit of designing the SNMP agent bundle based on OSGi. Finally, we expect the network manager to reduce time and expenses in managing enormous networks by using the SNMP agent bundle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.517-523
• /
• 2011

Anterior cruciate ligament (ACL) injuries are treatedwith surgical reconstruction. Although ACL consists of two functional bundles, only the anteromedial bundle is surgically reconstructed, and the effect of the reconstruction of the posterolateral bundle is unknown. The purpose of this study is to investigate the role of the posterolateral bundle and the effect of double-bundle reconstruction during single-leg landing. A 3D dynamic knee with various ACL reconstructed models was created using MRI, and single-leg landing motion was simulated using in-vivo human experimental data. The results showed that the lateral shift of the tibial insertion of the anteromedial bundle and the posterolateral bundle of the ACL constrain the tibial internal rotation more efficiently than a single anteromedial bundle can. In addition, double-bundle ACL reconstruction is less sensitive to inaccuracies in the tibial tunnel placement.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.333-334
• /
• 2008

Overhead transmission lines are classified by the number of sub conductors per phase. Korean transmission lines use two, four, or six-conductor bundle. Bundle of conductors must have spacers or spacer dampers which keep the proper distance between sub conductors. They can prevent conductors from being vibrated or twisted due to the wind. As for the two-conductor bundle, alternating current flow generates absorption force between sub conductors which may cause a collision of sub conductors. To prevent sub conductors from being vibrated, twisted, and collided, spacer or spacer damper installation method is designed considering vibration characteristics of sub conductors. We have spacer installation method for four or six-conductor bundle lines. However, we don't have it for two-conductor bundle ones. So we have installed spacers at regular intervals in two-conductor bundle lines, and it caused rigid body oscillation of conductors due to the wind which made a flashover between conductors. This paper introduces a vibration characteristic analysis of two-conductor bundle and proposes a spacer installation method for two-conductor bundle lines.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.7
• /
• pp.542-549
• /
• 1999

Corona discharges form at the surface of a transmission line conductor when the electric-field intensity on the conductor surface exceeds the breakdown strength of air. In order to decrease the electric-field intensity on the conductor surface, a new 6 conductor bundle has been studied. This bundle, hybrid conductor bundle, consists of using a larger subconductor at the bottom two conductor positions in the 6-conductor bundles of each phase of the line. The electric field on these two larger subconductors is reduced which in turn reduces the corona noise. It is shown that this is a better solution for decreasing the electric-field intensity than ether the conventional bundle or the asymmetric bundle proposed by EPRI.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.109-114
• /
• 2005

Recently, the interest on anatomical ACL reconstruction with double bundle technique is increased to reproduce the original load distribution, and kinematics of the knee. We developed an arthroscopic double bundle ACL reconstruction technique using autogenous quadriceps tendon with 2 splitted graft and patellar bone plug. The anteromedial bundle and posteolateral bundle of the ACL is replicated with each splitted graft of quadriceps tendon and fixed with biodegradable interference screw on the 2 femoral tunnels. The patellar bone plug of quadriceps tendon is fixed with biodegradable interference screw within the 1 tibial tunnel. We suggest that our technique using quadriceps tendon may be an alternative in arthroscopic double bundle ACL reconstruction.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.173-176
• /
• 2000

This study was carried out to investigate the filtration characteristics of membrane modules according to hollow fiber dispersion for direct solid-liquid separation of activated sludge. 2 bundle, 4 bundle, and 10 bundle, and 10 bundle module used in this experiment according to hollow fiber dispersion was manufactured at laboratory and permeate flux and transmembrane pressure(TMP) of each module were observed under a suction pressure of 0.5kgf/c$m^2$. As the hollow fibers were dispersed, permeate flux was increased and TMP was decreased. Permeate flux and TMP of each module was 15.0 $\ell$/$m^2$.h and 31.8 cmHg for 2 bundle, 16.0 $\ell$/$m^2$ .h and 17.4 cmHg for 4 bundle, and 20.4 $\ell$/m2 .h and 31.8 cmHg for 10 bundle. In conclusion, the membrane fouling is expected to be decrease by maintaining lower TMP with hollow fiber dispersion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.41-47
• /
• 1995

A parametric study bas been performed for the various refueling schemes of CANDU 6 reactor loaded with reference DUPIC fuel. The optimum discharge burnup was determined such that the peak bundle power is minimized for the equilibrium core. Based on the results of instantaneous core calculation using patterned random age distributions, it was decided to perform the refueling simulations only for 2-bundle and 4-bundle shift refueling schemes. The 600 FPD simulation has shown that the operational margins of the channel and bundle power to the license limits are 7.9% and 17.1%, respectively, for 2-bundle shift refueling scheme. The 4-bundle shift refueling scheme also satisfies the license limits and the operational margins of the channel and bundle power are 7.1% and 9.8%, respectively. The result of refueling simulation indicate the possibility of using reference DUPIC fuel in current CANDU 6 reactor.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.406-410
• /
• 2001

For 4-conductor bundle transmission line spacer damper are equipped so as to keep the spacing between sub conductors. For 4-conductor bundle the subspan spacing of a spacer damper is determined and applied in order that the bundle may get restored to a normal state when 4-conductor bundle is rolled by rigid body vibration due to wind. But 4 conductors of 345kV 4-conductor bundle transmission line were twisted by the angle of $315^{\circ}$ for the first time korea. In this paper, we will analyze the reason of the power line twisting of 4-conductor bundle which occurred for the first time in korea and offer the preventive countermeasures for this