• 건축역사연구
• /
• 제14권1호
• /
• pp.89-105
• /
• 2005

The central aim of this thesis is to see if the structure of Palsangjeon(捌相殿) in Pubjoo Temple(法住寺), a five sto wooden pagoda in Chosen(朝鮮) Dynasty, was handed down from the ancient and middle ages. This study was performed through an analysis of Gilt-Bronze Pagoda built in Koryo(高麗) period. In other words, it is aimed at analyzing which lineage the structure of Palsangjeonbelongs to as a wooden pagoda. In analyzing the structure of Palsangjeon, I attempted to find out its source from the remains of Koryo period prior to the Chosen Dynasty. Examples are the Gilt-Bronze Pagoda, built during the Koryo period. I have also examined its relationship with other existing wooden pagodas and remains. The analysis of Palsangjeon, a five story wooden pagoda in Chosen Dynasty, focuses on the following: First, I explored the possibilities of whether the structure of Palsangjeon was newly invented in Chosen Dynasty, or if it had been derived from the wooden pagodas in the Koryo period. Secondly, I tried to find out if the stable vertical planes, with a great successive diminution ratio, were derived from the middle age, i.e. Koryo period. The results of the study of Palsangjeon through Gilt-Bronze Pagoda analysis are as follows: 1. The structure of Gilt-Bronze Pagoda, a wooden pagoda from the Koryo period, is roughly classified into the accumulation type, using pipe pillars, and the one story type using whole pillars. In the accumulation type, stories are connected in either a flat format or an intervening format. The Gilt-Bronze Pagoda is mainly composed of pipe pillars, with some whole pillars. However, the central pillar was omitted in the building structure. Generally, the upper and lower stories are connected by pipe pillars in a crutch format. All the pillars, whether they are pipe pillars or whole pillars, used Naiten(內轉) technology. The Eave supporter has the Haang type(下昻) and the Muhaang type(無下昻). In most cases, high balustrades are furnished, but few tables of high balustrades have been found. The slanting roof formats have been handed down from Paekche(百濟), Silla(新羅), or Koryo(高麗). However, the structure of the octagon is assumed to be derived from Koguryo(高句麗). The structure of the Gilt-Bronze Pagoda from the Koryo period is mainly composed of accumulated flat squares, with some spire types. intervening format, the structure of Palsangjeon used whole pillars in a half story format in which upper level side pillars are installed on the lower level tie beam. From the Bronze Pagoda from the Koryo period, we can assume that the half story format of wooden pagodas that has stable vertical planes with a great successive diminution ratio was created during the mid-Koryo period at the latest and had been idly developed by the time of the Chosen Dynasty. 3. The whole pillars in Palsangjeon are also found in Gilt-Bronze Pagodas from the Koryo period. Hence, all of the pillars in Palsangjeon seem to have been handed down from the ancient construction technology. They were also used in the construction of wooden pagodas from the Koryo period. Therefore, it is assumed that Palsangjeon was constructed using the construction technology of the Chosen Dynasty that had been developed from the wooden pagoda construction technology of the Koryo period. The stable vertical planes with a great successive diminution ratio in Palsangjeon are derived from ancient Korean wooden pagodas, which have developed into indigenous Korean wooden pagodas with fairly stable vertical planes and a great design, in the half story format of Koryo and Chosen Dynasty. Therefore, it is assumed that the structure of Palsangjeon has a systematic relationship with traditional Korean wooden pagodas and is one of the indigenous Korean wooden pagoda structures. 4. In China, the intervening format has been mainly used between stories in multi-story architecture since the ancient days. At the same time, the flat format as also used in ancient and middle ages. However, the flat format was replaced by whole pillars during the Ming(明) and Manchu(淸) Dynasties, in favor of simple and compact construction. The half-story format, in which upper level side pillars are installed on tie beams, has been found in some cases, but it doesn't seem to have been the primary construction technology. Few traces of the half-story format have been found in multi-story architecture in Japan, and it has not been used as a general construction format. By contrast, the half-story format, which seems to have been derived from the Koryo period, was used as a general construction format in multi-story architecture of the Chosen Dynasty. The construction technology of multi-story architecture is related to that of multi-story wooden pagodas, but they have different production technologies. It seems that the structure of Palsangjeon did not just adopt the construction technology of multi-story architecture in the Chosen Dynasty, but it was developed from wooden pagodas in the Koryo period, including the Gilt-Bronze Pagoda. 5. Since the ancient days, most Chinese and Japanese wooden pagodas have adopted an accumulation type of structure using pipe pillars, with accumulated pointed towers. On the other hand, though most Korean wooden pagodas have also adopted an accumulation type of structure from the ancientdays, one story type using whole pillars was created in the Koryo and Chosen Dynasties. The wooden pagoda structure of Palsangjeon, with stable vertical planes in a half story format, is a unique Korean construction technology, different from the construction technologies of Chinese and Japanese wooden pagodas. This thesis clearly determined the structural characteristics of Palsangjeon. However, various remains have yet to be analyzed in depth, to establish an accurate construction technology system. In the beginning of this thesis, I had difficulty in precisely interpreting the internal structure of the Gilt-Bronze Pagoda from its appearance. However, in the process of study, the more serious problem was that there are few remains or ruins of multi-story architecture in ancient and the middle ages of Korea. Therefore, it is urgent to discover various remains in the future. This thesis succeeded in determining the structural characteristics of Palsangjeon. However, it fell short of clarifying the structural lineage of the stable vertical planes, although they show indigenous Korean architectural taste, representing the unique national emotion, and the construction format of multi-story wooden pagodas in Korea. I hope this is clarified in the future research.

• 자원환경지질
• /
• 제56권6호
• /
• pp.715-728
• /
• 2023

익룡 발자국의 개체 및 밀집도 측면에서 세계 최대 규모로 알려진 진주 충무공동 익룡·새·공룡발자국 화석산지는 2011년 천연기념물로 지정된 이래, 2018년 일부 화석층을 현장 보존하기 위해 보호각을 설치하였다. 이 중 제2보호각에 관리중인 화석층은 기 보고된 발자국 중 약 17%에 달하는 익룡·수각류·조각류 발자국(총 679개)이 단일 층준에서 발견되어 학술적 가치가 크지만 물리적, 화학적 손상이 지속적으로 발생하여 발자국의 관찰에 어려움이 있다. 특히 화석층 표면을 피복하는 유백색 오염물은 석고와 대기오염물로 구성된 복합체의 누적현상에서 기인한다. 오염물을 구성하는 석고는 화석층 하부층준에서 기원한 칼슘과 잔디의 생육활동으로 공급되는 황이 보호각 후방의 잔디가 식재된 토양층에서 집수된 지하수에 의해 용출되고, 보호각의 일대의 수분 순환 과정에서 화석층 표면에 증발잔류하며 결정화된다. 또 다른 오염물 구성체인 화분·광물 등은 분진 배출이 어려운 보호각 갤러리창을 통해 풍성으로 유입된다. 따라서 상이한 기원을 가진 두 오염물로부터 화석층을 보존하기 위해서는 보호각의 수분 및 대기 순환 제어와 지속적인 오염물 제거가 필요하다. 분진상의 석고와 대기 오염물은 스팀 세정법으로 충분한 제거 효과가 있으며, 암회색 셰일인 화석층은 레이저 흡수능이 커 흔적화석과 퇴적구조의 물리적 손실을 동반하는 레이저 세정법은 가급적 지양하는 것이 바람직하다.

• 도시과학
• /
• 제6권2호
• /
• pp.59-72
• /
• 2017

Studies on the calculation of accident costs include the approach on calculating damage costs covering all accidents regardless of first or secondary party and the one calculating damage costs generated by a single victim. These two approaches have a limitation of considering a subject for costs analysis as a single entity. In addition, research on estimating the interaction effects caused in the relationship between diverse traffic accident features and factors remains inadequate since most studies focused on calculating costs incurred in a single entity such as a victim, damaged building, or social organization in charge of managing car accident. This study intends to identify the expected range of old age where a specific interaction effect would remain, compare accidents between old age section and the entire age section, and discover an exogenous variable to be applied in accident drop effects in senior people and reduced benefits by calculating and testing additional accident costs in case the first party and the second party all pertain to the senior age section. By classifying the entire accidents caused by old drivers according to the types of cars, significant coefficients representing the influence that affects car accidents according to the characteristics are calculated and set them as the representative variables by selecting top variable in accordance with from low to high order. Furthermore, characteristics on five age groups such as a group of over 65 and less than 70, a group of over 70 and less than 75, a group of over 75 and less than 80, a group of over 80 and less than 85, and a group of over 85 are elicited and compared them with these preselected accident characteristics variables, thereby identifying what changing effects come out.

• 한국건설관리학회논문집
• /
• 제8권1호
• /
• pp.57-65
• /
• 2007

철근 공장가공은 현장가공에 비하여 가공의 정밀도를 향상시킬 수 있을 뿐 아니라 철근의 절단 손실을 줄일 수 있는 장점이 있다. 최근 도심지 공사의 증가로 야적장이 부족하고 숙련된 현장 노무인력의 확보가 어려워짐에 따라 향후 철근의 공장가공 방식은 점차 확대될 것으로 예상된다. 본 연구에서는 철근가공 공장방식의 중요성을 인지하고 그간의 연구들이 배근작업과 전문건설업체를 중심으로 이루어졌다는 점에 착안하여 18개 철근가공 공장을 대상으로 실태조사를 실시하였다. 실태조사 결과를 토대로 철근공장가공 활성화를 위한 방안으로 철근가공 형상 표준화, 시공성이 반영된 배근상세도 작성 및 철근 가공형상표 산출 업무 전산화, 배근작업의 표준화와 ADC기반의 철근자재 추적시스템을 개발을 제안하였다.

• 보존과학연구
• /
• 통권31호
• /
• pp.103-120
• /
• 2010

Most of the important stone cultural heritage (National treasures and Treasures) in Korea are mainly located outdoor and considerably affected by the changes of the temperature, humidity and rainfalls. 541 of the stone cultural heritage are preserved as National treasure and Treasure. The pagodas occupy 187 remains and next 127 Buddha statues, 68 monuments, 60 stupas, and the others 74 stone cultural heritages. The shelter has been installed for one pagoda, 60 Buddha statues, 36 monuments and two stupas. The shelters are categorized in three shapes as traditional shape, modern shape, and others (tradition+modern). Approximately 100 of shelters that have constructed in traditional ways, and about nine of shelters have modern ways, and the only one has the combination shape of tradition and modern, which has been constructed since mid 1900s and repaired from the 1980s~2000s. Many researchers are studying for improvement of manners such as repairing, remodeling or removing of the shelter because problems have occured on shelters. Architectural form of traditional style of Korean timber building is respected, but it has problems on importing natural sunlight to the inside as well as ventilation and spacial problems. However, it needs to supplement policies to improve the positive roles of shelters such as prevention of artificial damage, blocking acid rain, and so on. For instance, the rock-carved Buddha Triad in Seosan, it had problems with viewing, contamination, and dew condensation on the surface. These problems decreased after dismantling the shelter, the space was made for improvement of viewing and dew condensation, and moisture problems were in better conditions. The velocity wind is an important factor in drying conditions on the surface of the rock, therefore the condition has improved after dismantling the shelter.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.254-261
• /
• 2005

This paper presents an attempt to develop a visual programming language-based 3D virtual reality authoring tool intended to compose virtual interior space. The rapid development of digital technology and the wide spread of the Intenet have expanded the different uses of virtual reality in a number of applications ranging from interior design to building maintenance. In particular, the construction of cyber spaces based on existing interior spaces is becoming increasingly important. Current research, however, remains at the level of converting 3D models into virtual reality models, despite practitioners' needs for structural space models. Moreover, commercial tools to build virtual reality space have the disadvantage of targeting people who have professional knowledge of computer programs and computer graphics. Accordingly, the 3D virtual reality authoring tool developed in this research - called the VESL system - enables virtual and structural space to be easily composed using intuitive and interactive visual interfaces, which are based on visual programming techniques. The VESL system also provides an XML based semantic description of interior space, to be used to describe interior space information. We anticipate that the virtual reality spaces composed by this system will be of considerable use in the fields of architecture and interior design. Further research issues identified at the end of the research include developing a converter/filter for transforming Internet virtual reality standard language, or VRML, and evaluating the application of the system for practical use.

• Clinical and Experimental Pediatrics
• /
• 제59권5호
• /
• pp.205-211
• /
• 2016

Idiopathic nephrotic syndrome (INS) in children is characterized by massive proteinuria and hypoalbuminemia. Minimal change nephrotic syndrome (MCNS) is the most common form of INS in children. The pathogenesis of MCNS still remains unclear, however, several hypotheses have been recently proposed. For several decades, MCNS has been considered a T-cell disorder, which causes the impairment of the glomerular filtration barrier with the release of different circulating factors. Increased levels of several cytokines are also suggested. Recently, a "two-hit" theory was proposed that included the induction of CD80 (B7-1) and regulatory T-cell (Treg) dysfunction, with or without impaired autoregulatory functions of the podocyte. In contrast to the well-established involvement of T cells, the role of B cells has not been clearly identified. However, B-cell biology has recently gained more attention, because rituximab (a monoclonal antibody directed against CD20-bearing cells) demonstrated a very good therapeutic response in the treatment of childhood and adult MCNS. Here, we discuss recent insights into the pathogenesis of MCNS in children.

• 한국멀티미디어학회논문지
• /
• 제11권9호
• /
• pp.1245-1257
• /
• 2008

이 연구에서는 기존의 클레이 애니메이션 제작 공정이 가지는 문제점을 개선하기 위해 3D 컴퓨터그래픽을 도입한 새로운 제작 공정을 제안한다. 그 핵심은 기존 공정을 바탕으로 하되 대단히 노동집약적인 캐릭터 제작 과정을, 3D 컴퓨터그래픽에 의한 디지털 캐릭터로 대체하는 것이다. 클레이 애니메이션에 등장하는 캐릭터를 3D 컴퓨터그래픽으로 구현하기 위해 클레이 캐릭터와 동일한 색상과 종류의 유성찰흙을 사용하여 폴리곤 모델링 캐릭터의 UVW 좌표 값에 맞춘 디퓨즈 맵과 디스플레이스먼트 맵을 제작하였다. 또한 파노라마 HDRI 자동 촬영 시스템을 개발하여 미니어처 세트 촬영 환경의 조명 정보를 초고해상도의 파노라마 HDRI 형식으로 제작, 이를 디지털 라이팅 소스로 사용하였다. 이 과정을 통해 대단히 사실적인 결과물을 얻음과 동시에 숙달된 작업자의 노하우에만 의존하던 스톱모션 제작 공정을 공학적 접근에 의한 자동화된 방식으로 개선할 수 있었다.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.427-436
• /
• 2009

본 연구는 철로를 신설 또는 확장 시 목표로 설정한 지표를 최적화시키는 최적 노선구간을 선정하여 철도망의 네트워크 효과를 고려하는 방법론인 철도망 설계모형(Railway Network Design Problem, RNDP)을 이용하여 설계속도 수준별 고속철도망의 노선축별 분석구간별 투자우선순위를 선정하였다. RNDP의 목적함수를 총 통행시간 최소화로 설정하여 분석한 결과 투자우선순위가 가장 높은 고속철도망 노선축은 서동축이며, 다음으로 서해축, 남해축 순으로 나타났다. 또한 노선축별 최적안은 서동축의 경우 전 구간을 400km/h급으로 신선을 건설하는 대안이, 서해축의 경우 전라선 익산$\sim$여수 구간을 200km/hr급으로 고속화하는 사업을 활용하고 이 구간을 제외한 나머지 신선 구간(송도$\sim$익산)을 400km/h급으로 건설하는 대안인 것으로 분석되었다. 마지막으로 남해축의 경우에는 경전선, 즉 순천$\sim$마산 구간을 200km/hr로 고속화하는 사업을 활용하여 나머지 신선 구간(목포$\sim$순천, 마산$\sim$부산)을 350km/h로 건설하는 대안인 것으로 분석되었다.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.105-109
• /
• 2008

The purpose of this study is to distinguish the causes of broken glass on doors or windows when it is originally kept among the remains on the floor in fire site - whether it was broken due to heating or outer power-through test and characteristics of the broken plane including the pattern on the plane. Addition to it, the study tries to find characteristics to judge the point and direction of breakdown through the analysis of glass broken by outer power. With two assumed causes - a) breakdown due to heating and b) breakdown due to outer power-3 pieces of glass plates ($30cm{\times}30cm{\times}5mm$) were tested for each case, getting the results as following: First, for the glass broken due to the change of temperature, the broken plane is of slow and smooth curve without any pattern. Second, for the glass broken due to outer power, with the impact point as the center, the glass shows breakdown of radial type and the side shows breakdown of near-perpendicular type. The far the broken piece is from the impact point, the bigger the size is. The broken piece at the impact point is of long triangle type and the two long planes of the triangle shows semi-arc with the center of breakdown point and the other plane shows opposite pattern. Third, when glass that is damaged by outer power is heated, damaged forms and side patterns of the glass that is damaged by outer power are heated and disappeared.