• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.71-72
• /
• 2020

γ-dicalcium silicate (γ-C2S) is characterized by its strong carbonation reactivity and has the prospect to be utilized as a building material with the added benefit of CO2 capture. This paper aims to point out the impact of γ-C2S on the microstructure characteristics and mechanical properties of GGBFS paste, and mortar samples. Three curing conditions including un-carbonation, natural carbonation, and accelerated carbonation were applied to the research. Besides, hydration products after the carbonation process are also detected. What's more, the carbonation treatment method also meets the requirement of capture more greenhouse gas and recycles the waste products of metallurgy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.63-69
• /
• 2020

우리나라는 전체 폐기물 발생량 중 건설폐기물 발생량은 약 47.3%로 가장 많은 비중을 차지하고 있고 그 중 폐콘크리트가 약 62.8%로 재활용이 시급한 상황이다. 이에 정부는 건설폐기물의 재활용을 촉진하기 위해 순환골재의 다양하고 폭넓은 활용을 권장하고 있다. 또한 건축물에 콘크리트용 순환골재를 사용할 경우 용적률, 건축높이 등 건축기준을 완화해주고 있다. 그 기준은 콘크리트용 순환골재 최대 25% 사용 시 용적률을 최대 15% 완화해 주는 조건이다. 이에 본 연구는 순환골재의 콘크리트용으로의 사용을 적극 권장하고자 콘크리트용 순환골재 사용 시 건축기준의 완화 내용을 검토하였고 순환골재 중 순환굵은골재을 사용하여 치환율에 따른 배치플랜트에서의 적정 혼합시간을 도출하였다. 또한 건조수축 개선을 위해 순환골재용 혼화제를 사용하여 순환굵은골재 치환율별 콘크리트의 물리, 역학적 특성에 대해 비교 분석하여 건조수축 개선 효과를 나타내어 향후 현장에 안정적으로 적용이 가능할 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.99-100
• /
• 2015

Significant amount of bottom ash has been produced in the power plant located at southeast region of Korea, but those were abandoned in the pond site without any treatment. In these days, there is a strong move to enforce environmental regulations to protect surrounding nature, a lot of pressure is given to the power plant industry to remove hazardous chemicals from their waste material before landfill or site storage. The overall objective of this research is to separate hazardous chemicals from the bottom ash, and use it safely as sustainable construction material. In this specific study, magnetic separation of bottom ash was applied, and used as a fine aggregates to make mortar specimens. According to the results, it was found that the use of bottom ash decreased 28-day compressive strength. However, using non-magnetic bottom ash provides best results in terms of thermal conductivity, showing strong possibility to be used as heat insulating material.

• Elastomers and Composites
• /
• 제29권3호
• /
• pp.207-212
• /
• 1994

Recently, the develpment of waterproof techniques has been required in morden building field. It is undoubt that one of the best materials for waterproof is polyurethane. Polyurethanes have advantages such as good adhesive ability, durability, weatherproof. However, they have disadvantages like high cost, delicate varnish layer, swelling problem. In this study, we found that the polyurethane with rubber particle of waste tire can solve those problems. We concluded that 10% of rubber particles containing polyurethane was recommened as the waterproof materials.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.463-469
• /
• 2003

2개의 보조건물(PAB와 SAB)이 있는 KSNP의 경우, 단일 보조건물만을 고려하고 있는 PWR-GALE 코드를 이용하여 기체배출량을 평가하기에는 한계가 있다. 본 논문에서는 기존 PWR-GALE 코드는 그대로 이용하면서 KSNP의 설계특성을 반영하기 위하여 일부 입력변수를 수정해서 보조건물 옥소방사능 배출량을 사실적으로 평가할 수 있는 방법론을 개발했다. 울진 5,6 호기의 설계자료를 이용하여 기존 평가방법론과 개선된 평가방법론을 적용해 사례연구를 실시하였다. 기존 평가방법으로 보조건물 옥소의 유효제거효율을 산출한 결과 42%가 나왔으나 PAB와 SAB의 옥소핵종 농도가 동일하다고 가정을 만족하지 못하는 단점이 있다. 개선된 평가방법으로 옥소의 유효제거효율을 산출한 결과 88%가 나왔다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.228-229
• /
• 2018

In the construction industry, we have set goals such as reduction of greenhouse gas emissions and reduction of energy use. In particular, reduction of CO₂ emissions in the concrete manufacturing process, reduction of industrial waste and industrial wastes into concrete The zero-emission level of reuse as a resource is under review. On the other hand, the cost of stone is expensive due to small quantity production of domestic stone production in order, it is difficult to carry and construct with heavy material, and it takes long time to construct. In order to solve the shortage of supply and demand of natural stone, various kinds of stone powder, artificial stone made by putting stone texture on the surface of mortar or concrete, fiber reinforced plate, tiles and the like are increasingly used. In this study, the artificial stone using slag and recycled aggregate instead of natural stone was fabricated and the strength characteristics were evaluated for its applicability and feasibility.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.143-144
• /
• 2019

Recently, environmental pollution related to global warming is on the rise. Meanwhile, renewable energy is a representative example of many efforts to develop eco-friendly energy to solve the depletion of natural resources and the depletion of petroleum resources in conjunction with global warming. Among them, photovoltaic power generation is increasing the subsidies for the government to increase the production of photovoltaic electricity of the general public, showing a high growth rate. However, polysilicon, which is a raw material of the photovoltaic panel, generates waste called polysilicon sludge in the manufacturing process. In order to produce 1 ton of polysilicon, about 2 tons of waste polysilicon sludge is generated. In 2012, polysilicon sludge was generated at 78,000 tons, with an average of about 220 tons per day. The sludge generated due to insufficient treatment of polysilicon sludge is currently solidified and is processed by landfilling. Therefore, in this study, polysilicone sludge is used as the concept of admixture, and the physical properties of the matrix according to the polysilicon sludge replacement ratio based on light burned magnesia is determined.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.75-84
• /
• 2020

Modular construction is a construction method whereby prefabricated volumetric units are produced in a factory and are installed on site to form a building block. The construction productivity can be substantially improved by the manufacturing and assembly of standardized modular units. 3D printing is a computer-controlled fabrication method first adopted in the manufacturing industry and was utilized for the automated construction of small-scale houses in recent years. Implementing 3D printing in the fabrication of modular units brings huge benefits to modular construction, including increased customization, lower material waste, and reduced labor work. Such implementation also benefits the large-scale and wider adoption of 3D printing in engineering practice. However, a critical issue for 3D printed modules is the loading capacity, particularly in response to horizontal forces like wind load, which requires a deeper understanding of the building structure behavior and the design of load-bearing modules. Therefore, this paper presents the state-of-the-art literature concerning recent achievement in 3D printing for buildings, followed by discussion on the opportunities and challenges for examining 3D printing in modular construction. Promising 3D printing techniques are critically reviewed and discussed with regard to their advantages and limitations in construction. The appropriate structural form needs to be determined at the design stage, taking into consideration the overall building structural behavior, site environmental conditions (e.g., wind), and load-carrying capacity of the 3D printed modules. Detailed finite element modelling of the entire modular buildings needs to be conducted to verify the structural performance, considering the code-stipulated lateral drift, strength criteria, and other design requirements. Moreover, integration of building information modelling (BIM) method is beneficial for generating the material and geometric details of the 3D printed modules, which can then be utilized for the fabrication.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.19-26
• /
• 2014

The building section is providing immediate causes for global climate change problems since it takes about 50% of carbon emission, 20~50% of waste discharge, 33% of energy consumption, 40% of resource use, and 17% of water consumption. So, many countries over the world have developed and implemented green building certification systems to assess sustainable performances of buildings since the early 1990s. In korea, the green building certification system to induce the diffusion of sustainable buildings was first introduced in 2002 and developed as an improved version of the G-SEED(Green Standard for Energy and Environmental Design) system in 2013 after major revisions of related legislations. This research conducts a survey targeting residents on an apartment building that was certified as green building and examines the importance of assessment criteria on apartment buildings to certify green buildings using the Analytic Hierarchy Process(AHP) method. And it proposes a new direction on certification assessment standards from the resident's prospective. As a result, assessment criteria such as indoor environment, ecological environment, energy & environment pollution, and maintenance management among 7 main ones turned out important on assessing the G-SEED system for apartment buildings, while criteria such as material & resource, water circulation management, and land use & transportation did relatively unimportant.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.664-669
• /
• 2019

In this paper, a water-based green polymer mud is synthesized by simple compounding method. Effects of different kinds of tackifiers, their molecular weight on the viscosity of polymer mud and the effects of different fluid loss additives on mud fluid loss are studied. The results show that when polystyrene and anionic polyacrylamide with molecular weight of 8 ~ 10 million are used as the main thickening ingredient, polymer mud with high viscosity and high stability can be obtained. When the prepared polymer mud is formulated as NPAM: PEO: Hydroxypropyl cellulose(HPC) : Water = 42:10:10:100000 (unit: kg), the viscosity can reach 20.6 s, the filtration loss in 7.5 min is 24 mL, and the sand content is only 0.1 %. Compared with traditional bentonite mud, the green environment-friendly polymer mud has the advantages of small amount of waste, low environmental pollution, and low pulping cost, and can meet the construction needs for most topography and geomorphology drilling engineering.