• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.883-890
• /
• 2019

Two-phase flow near the wellbore in volatile oil reservoirs causes complications in well test analysis. In this study, the flow behavior of volatile oil reservoirs below the bubble-point pressure and the potential of radial composite model for interpretation of two-phase well test in volatile oil reservoirs was investigated. A radial composite model was used for two-phase well test analysis. A new procedure was developed to interpret well test data and estimate the radius of the two-phase region. The changes in fluid composition near the wellbore during drawdown test were found to increase the saturation pressure, which affects the saturation profile during build-up. Well test results showed that the radial composite method is a powerful tool for well test characterization and estimation of reservoir parameters. The proposed procedure was able to estimate the reservoir parameters and radius of the two-phase region with acceptable accuracy.

• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.74-80
• /
• 2003

The purpose of this study was to evaluate the performance of the teflon encapsulated TLD rod, which may be used in nuclear medicine for the direct in vivo measurements of radiation dose. We analyzed the influence of teflon encapsulation for measuring absorbed dose. An experiment was carried out to evaluate and observe the response of a LiF TLD-100 rod in a thin-wall teflon capsule at different depths in a solid phantom. An adult anthropomorphic phantom was used to measure the absorbed dose using thin teflon encapsulated TLD. The measurements of PDD-, and TMR in solid phantom and athe bsorbed dose in humanoid phantom performed with normal TLD were compared with values obtained by teflon encapsulated TLD. It was demonstrated that the difference of TL response of LiF in phantom with and without teflon thin-wall capsule was less than 3％ under the same conditions beyond the build-up region. However, significant differences were observed near the phantom surface because of the build-up effect caused by the thin-wall thickness of the teflon capsule. Thus, our study showed that the contribution of teflon thin-wall capsule to TLD response for the megavoltage photon beams was negligible and that it did not significantly effect dose measurement. The teflon encapsulated TLD described in this work has been proven to be appropriate for in vivo dosimetry in therapeutic environments.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.114-129
• /
• 2016

Since the release of mid-term domestic GHG goals until 2020, in 2009, some various GHG reduction policies have been proposed to reduce the emission rate about 30% compared to BAU scenario. There are two types of modeling approaches for identifying options required to meet greenhouse gas (GHG) abatement targets and assessing their economic impacts: top-down and bottom-up models. Examples of the bottom-up optimization models include MARKAL, MESSAGE, LEAP, and AIM, all of which are developed based on linear programming (LP) with a few differences in user interface and database utilization. The bottom-up model for electric sector requires demand management, regeneration energy mix, fuel conversation, etc., thus it has a very complex aspect to estimate some various policies. In this paper, we suggest a bottom-up BAU model for electric sector and how we can build it through step-by-step procedures such that includes load region, hydro-dam and pumping storage.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.27-37
• /
• 2005

Opening 21th Century, all the Countries of the world has been focusing on build up the foundation of cultural infrastructure in a various way, since the awareness of importance for cultural design products has been turnover. For this reason, all the countries in the world, recognize that it is more important than any other things to plan to establish a structure which is suitable to the real conditions of a region in order to efficiently manage or operate their cultural environment, in particular, they think it is urgent they should contrive to develop their regional industries with new information media, introduction and spread of the up-to-date technique of design. However, our regional related industries very difficulty for the moment for them to apply new, designing technique or to settle technical bottlenecks themselves. Accordingly, in order to resolve such a structural point at issue, this study has carried the newly designed and developed, wooden, cultural craft items that were produced by utilizing the ultramodern digital technology installed at TIDIC, it would contribute to achieve some global cultural products.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.159-172
• /
• 2023

The purpose of this study is to explore a collaborative start-up space(Co-Space) configuration plan in terms of university-regional linkage through demand analysis on the composition of university-regional linkage startup space. To this end, a survey was conducted for request analysis, and the collected data were analyzed through the t-test, The Lotus for Focus model. In addition, FGI was implemented for entrepreneurs, and the direction of the composition of the university-region Co-Space was derived from various aspects. The results of this study are as follows. First, as a result of the analysis of the necessity of university-community Co-Space, the necessity of opening up the start-up space recognized by local residents and the necessity of building the start-up space in the region were high. In addition, men recognized the need to build a space for start-ups in the community more highly than women did women. Second, as a result of analysis of demands for university-regional Co-Space, the difference between current importance and future necessity of university-regional Co-Space was statistically significant. Third, as a result of analysis on the composition of the startup space by cooperation between universities and regions, different demands were made for composition of the startup space considering openness and closeness, and for composition of the startup space size. The implications of the study are as follows. First, Co-Spaces need to be constructed in conjunction with universities in accordance with the demands of start-up companies in the region by stage of development. Second, it is necessary to organize a customized Co-Space that takes into account the size and operation of the start-up space. Third, it is necessary to establish an experience-based open space for local residents in the remaining space of the university. Fourth, it is necessary to establish a Co-Space that enables an organic network between local communities, start-up investment companies, start-up support institutions, and start-up companies. This study is significant in that it proposed the regional startup ecosystem and the cooperative start-up space structure for strengthening start-up sustainability through cooperation between universities and local communities. The results of this study are expected to be used as useful basic data for Co-Space construction to build a regional start-up ecosystem in a trend emphasizing the importance of start-up space, which is a major factor affecting start-up companies.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.20 no.1
• /
• pp.149-160
• /
• 2024

This paper was conducted to improve understanding of how the start-up process affects the local community and how young entrepreneurs build and grow their businesses in the process through analysis of young people who started businesses in the region. The research method was conducted through in-depth interviews with 10 young entrepreneurs who started businesses in the western Gyeongsangnam-do region, where population decline is prominent, and the collected data was analyzed through a grounded theory approach to derive common and meaningful themes between each case. proceeded. As a result of the study, insights were derived about the background of entrepreneurs settling in the region, the motivation for starting a business using local resources, the impact of government and local government support, business strategies for sustainable growth, and the entrepreneurs' personal performance. Through this analysis, we hope to provide important insights into the positive impact local entrepreneurship has on the community and how young entrepreneurs contribute to local development.

• Journal of KIISE:Databases
• /
• v.29 no.5
• /
• pp.367-380
• /
• 2002

Due to recent increase in applications requiring huge amount of data such as spatial data analysis and image analysis, clustering on large databases has been actively studied. In a hierarchical clustering method, a tree representing hierarchical decomposition of the database is first created, and then, used for efficient clustering. Existing hierarchical clustering methods mainly adopted the bottom-up approach, which creates a tree from the bottom to the topmost level of the hierarchy. These bottom-up methods require at least one scan over the entire database in order to build the tree and need to search most nodes of the tree since the clustering algorithm starts from the leaf level. In this paper, we propose a novel top-down hierarchical clustering method that uses multidimensional indexes that are already maintained in most database applications. Generally, multidimensional indexes have the clustering property storing similar objects in the same (or adjacent) data pares. Using this property we can find adjacent objects without calculating distances among them. We first formally define the cluster based on the density of objects. For the definition, we propose the concept of the region contrast partition based on the density of the region. To speed up the clustering algorithm, we use the branch-and-bound algorithm. We propose the bounds and formally prove their correctness. Experimental results show that the proposed method is at least as effective in quality of clustering as BIRCH, a bottom-up hierarchical clustering method, while reducing the number of page accesses by up to 26～187 times depending on the size of the database. As a result, we believe that the proposed method significantly improves the clustering performance in large databases and is practically usable in various database applications.

• Journal of Radiation Protection and Research
• /
• v.11 no.1
• /
• pp.77-82
• /
• 1986

Determination of the relation between the kerma(Kinetic Energy Released in Material) and the absorbed dose is one of the basic problems of dosimetry. Kerma and absorbed dose were measured for 6 MV X-ray from the high energy medical linear accelerator and $^{60}Co$ gamma-ray. The experimental results show that the absorbed dose in the transient equilibrium region practically coincide with the kerma in water and Al for $^{60}Co$. The maximum dose depths were $1.45g/cm^2$ for 6MV X-ray and $0.48g/cm^2\;for\;^{60}Co$ gamma-ray. The ratios of the absorbed dose at maximum build-up to the collision kerma at the surface, ($K^{att}$), were 0.949 for 6MV X-ray and 0.992 for $^{60}Co$ gamma-ray. No difference was found between water and Al when the standard field size was used. This results show that the dependence of $K^{att}$ on the material is very small.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.29-36
• /
• 2008

In this paper we propose a real-time method to estimate a pointing region from two camera images. In general, a pointing target exists in the face direction when a human points to something. Therefore, we regard the direction of pointing as the straight line that connects the face position with the fingertip position. First, the method extracts two points in the face and the fingertips region by using detecting the skin color of human being. And we used the 3D geometric information to obtain a pointing detection and its region. In order to evaluate the performance, we have build up an ICIGS(Interactive Cinema Information Guiding System) with two camera and a beam project.