• 전기의세계
• /
• v.14 no.5
• /
• pp.15-19
• /
• 1965

Laminated insulators are largely used in the insulation of electric apparatus. This reason is based on the fact that the solid state insulators meet to electrical break-down by the weak spot theory. Thus the break-down voltage of the laminated insulators are generally affected by the density, distribution and the form of the weakspot contained in the each laminated thin insulator. In this experiment the effects of the characterics of weak spots are not studied, but the effects of the number of lamination and the pressure applied on the laminated insulator on its break-down voltage are investigated experimentaly, and got some interesting results which are reparted as follows.

• Journal of Applied Reliability
• /
• v.13 no.3
• /
• pp.165-174
• /
• 2013

Thruster break for aerogenerator performs a role that is stopping the rotor in case of emergency such as strong wind, system abnormality or maintenance check. In this study, failure analysis and test evaluation on the thruster break for aerogenerator are proposed, and the entire process to improve reliability of the product through design improvement is presented. The typical failure case is fatigue and wear, and failure cause on these are identified and improvement plan is presented. Lastly, reliability improvement is established to analyse test results before after the life test.

• Structural Engineering and Mechanics
• /
• v.5 no.2
• /
• pp.149-165
• /
• 1997

A dynamic time-history analysis of the coupled internals and core in the vertical direction is performed as a part of the fuel assembly qualification program. To reflect the interaction between the fuel rods and grid cage, friction element is developed and is implemented. Also derived here is a method to calculate a hydraulic force on the reactor internals due to pipe break. Peak responses are obtained for the excitations induced from earthquake and pipe break. The dynamic responses such as fuel assembly axial forces and lift-off characteristics are investigated.

• Journal of Korea Water Resources Association
• /
• v.42 no.6
• /
• pp.457-464
• /
• 2009

This paper proposes methodologies for analyzing the accuracy of the proportional hazards model in predicting consecutive break times of water mains and estimating the time interval for economical water main replacement. By using the survival functions that are based on the proportional hazards models a criterion for the prediction of the consecutive pipe breaks is determined so that the prediction errors are minimized. The criterion to predict pipe break times are determined as the survival probability of 0.70 and only the models for the third through the seventh break are analyzed to be reliable for predicting break times for the case study pipes. Subsequently, the criterion and the estimated lower and upper bound survival functions of consecutive breaks are used in predicting the lower and upper bounds of the 95% confidence interval of future break times of an example water main. Two General Pipe Break Prediction Models(GPBMs) are estimated for an example pipe using the two series of recorded and predicted lower and upper bound break times. The threshold break rate is coupled with the two GPBMs and solved for time to obtain the economical replacement time interval.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.208-212
• /
• 2003

Extended light illumination by street lamp and automobile light has provoked problem in farmland. Night break was imposed by incandescent lamp (50∼60 lux) for 10 minutes every three hours during 12 hours dark period increased culm length compared to continuous dark of 12 hours, and decreased the number of grains per spike in rice. However, these characters were increased by 12 hours dark period with and without night break as compared to 9 hours continuous dark condition. Compared to 12 hours continuous dark condition, night break delayed heading by 9 and 26 days and 9 hours continuous dark condition delayed it by 47 and 41 days in Ilpumbyeo and Hwaseongbyeo, respectively. Night break increased stem length and node number, while decreased pods of soybean cultivar Hwanggeumkong. The stem length and node number were increased by 9 hours continuous dark condition compared to 12 hours dark condition with and without night break. Compared to 12 hours continuous dark rendition, night break delayed flowering by 4 days and to 9 hours continuous dark condition by 19 days.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.61-66
• /
• 2002

Double cropping system in a year in Kyoho grapes (Vitis labruscana L.) has currently been attempted in the plastic greenhouse. One of the problems in double cropping system is the promotion of bud break in summer season and shoot fertility. Effects of the control of soil moisture tension near the root zone and treatments of bud dormancy breaking agents on bud breaking in summer were examined to promote the bud break for the second fruiting. The lignification of shoots was induced in July or August by the control of soil moisture tension in root zone environment. The first shoot growth was almost the same as that in common plastic greenhouses. The highest bud break value appeared in the plot of cyanamide chemicals mixed with merit blue as over 75% bud break rate. The bud break rate in the discontinuing plot in irrigation showed significantly higher in bud break than that in the continuing plot in irrigation. Despite of the final high bud break rate, the time of bud break was irregular.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.571-578
• /
• 2009

Levee-break Analysis model is developed to predict the variation of breach width according to time and to estimate inundation area and depth in protected lowland. This Model calculate flood depth using 4 point implicit finite difference method in river channel and analyze breach flow based on physical theory introducing soil transport equation and erosion process. Breach analysis model and channel flood model are combined into Levee-Break Model and this model is applied to actual levee break case. Then, this model can simulate reasonably many levee-break parameters such as river stage, breach width, breach formation and so on. If the applicability of this model is proved through applications to more various actual levee-break cases, the suggested model is expected to do more accurate flood analyses on levee break site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.360-361
• /
• 2005

Rapid progress in IC fabrication technology has strong demand in polishing of silicon wafer to meet the tight specification of nanotopography and surface roughness. One of the important issues in Si CMP is the stabilization of polishing pad. If a polishing pad is not stabilized before main Si wafer polishing process, good polishing result can not be expected. Therefore, new pad must be subjected into break-in process using dummy wafers for a certain period of time to enhance its performance. After the break-in process, the main Si wafer polishing process must be performed. In this study, the characteristics of break-in process were investigated in Si wafer polishing. Viscoelastic behavior, temperature variation of pad and friction were measured to evaluate the break-in phenomenon. Also, it is found that the characteristic of the break-in seems to be related to viscoelastic behavior of pad.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.2
• /
• pp.85-90
• /
• 2021

A ADAS(Advanced Driver Assistance System) for the safe driving is an important area in autonumous car. Specially, a ADAS software using an image sensors attached in previous car is low in building cost, and utilizes for various purpose. A algorithm for detecting the break-lamp from the tail-lamp of preceding vehicle is proposed in this paper. This method can perceive the driving condition of preceding vehicle. Proposed method uses the YOLO techinicque that has a excellent performance in object tracing from real scene, and extracts the intensity variable region of break-lamp from HSV image of detected vehicle ROI(Region Of Interest). After detecting the candidate region of break-lamp, each isolated region is labeled. The break-lamp region is detected finally by using the proposed selective-attention model that percieves the shape-similarity of labeled candidate region. In order to evaluate the performance of the preceding vehicle break-lamp detection system implemented in this paper, we applied our system to the various driving images. As a results, implemented system showed successful results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.1
• /
• pp.91-101
• /
• 1988

Break-even analysis is a simple and useful tool in decisions and planning activities though its use is somewhat limited to short-term analysis. The subject is discussed in the fields of engineering economics, production management, cost and managerial accounting, finance, marketing, and so on. Conventional break-even analysis suits the case of stable price and low interest rate. In this paper, we try to overcome the limit by considering following factors, namely, time value of money, depreciation, tax, and capital gains. Also, considering learning effect, we increase applicability to a new project which raises certain changes such as a replacement of production process, an employee turnover, etc. Thus, we suggest a model which has a dynamic break-even quantity per period for the project. Furthermore, we examine the effect of inflation in break-even analysis.