• 한국재료학회지
• /
• 제21권7호
• /
• pp.410-414
• /
• 2011

This study was carried out to evaluate the microstructures and mechanical properties of a friction stir welded Ni based alloy. Inconel 600 (single phase type) alloy was selected as an experimental material. For this material, friction stir welding (FSW) was performed at a constant tool rotation speed of 400 rpm and a welding speed of 150~200 mm/min by a FSW machine, and argon shielding gas was utilized to prevent surface oxidation of the weld material. At all conditions, sound friction stir welds without any weld defects were obtained. The electron back-scattered diffraction (EBSD) method was used to analyze the grain boundary character distributions (GBCDs) of the welds. As a result, dynamic recrystallization was observed at all conditions. In addition, grain refinement was achieved in the stir zone, gradually accelerating from 19 ${\mu}m$ in average grain size of the base material to 5.5 ${\mu}m$ (150 mm/min) and 4.1 ${\mu}m$ (200 mm/min) in the stir zone with increasing welding speed. Grain refinement also led to enhancement of the mechanical properties: the 200 mm/min friction stir welded zone showed 25% higher microhardness and 15% higher tensile strength relative to the base material.

• 한국지형학회지
• /
• 제25권3호
• /
• pp.89-103
• /
• 2018

This study presents results of analysis on fault-related landforms and the Quaternary fluvial landforms, which are important evidences for active faulting by identifying surface deformation, around the Ulsan Fault Zone. In addition, this study suggests lineament map and inferred active fault-line map based on analyzing linearity and continuity of these landforms and by compiling location information of existing active faults. We convince that quantitative tectonic-geomorphological analysis are an effective method for active faults tracking, in particular, considering the conditions of relatively low seismicity and surface ruptured-events in the Korean Peninsula compared to plate boundary active areas. However, research on active fault in South Korea is just an infant stage since the 1990s and requires accumulation of research achievements on development and application of various fault analysis techniques, analysing and standardizing linear structures.

• 자원환경지질
• /
• 제21권3호
• /
• pp.277-285
• /
• 1988

The ELF-MT survey has been conducted at 9 points along the national road between the Sindangri and Dojonri area to study on the boundary between the Okchon and Choson systems, and subsurface geological structure of these two systems. Natural electromagnetic fields of 7.8, 14, and 20 Hz in the Schumann resonant frequency band were used for ELF-MT measurement. Apparent resistivity values were calculated from the measured magnetic and electric fields at each frequency, and resistivity sections were obtained by means of a trial and error method for one-dimensional analysis and finite element method for two-dimensioal analysis. The results of this study show that the resistivities of the Okchon and Choson systems are 700-3500 ohm-m and 40-5000 ohm-m, respectively. The boundary between these two systems is a fault with the width of 1 km fault zone and resistivity value of 200 ohm-m, and is located around Koburangjae. Another fault is appeared in Sindangri, and its resistivity value is 130 ohm-m. Intrusion of biotite granite is distributed in Jungchijae, and its resistivity value is 750 ohm-m. The area between Susanri and Koburangjae shows the highest resistivity value of 3500 ohm-m because metabasite and amphibolite are distributed in that area. Extremely low resistivity value of 40 ohm-m around Yongamsan is due to the Yongam formation, which is composed of graphitic black slate and overlying Choson Great Limestone group.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.458-463
• /
• 2000

The mechanical structures generally have discontinuous parts such as the cracks, notches and holes owing to various reasons. In this paper, in order to analyze effectively these singularity problems using the finite element method, a mixed analysis method which an analytical solution and finite element solutions are simultaneously used is newly proposed. As the analytical solution is used in the singularity region and the finite element solutions are used in the remaining regions except this singular zone, this analysis method reasonably provides for the numerical solution of a singularity problem. Through various numerical examples, it is shown that the proposed analysis method is very convenient and gives comparatively accurate solution.

• 지질공학
• /
• 제29권3호
• /
• pp.223-236
• /
• 2019

전기비저항탐사는 지질 분포나 단층 파쇄대의 유무 등의 지질 구조, 지층의 풍화 및 변질 정도, 지하수 등을 파악하기 위하여 광범위하게 활용되는 탐사기법이다. 본 연구에서는 지하 전기비저항의 분포특성을 분석하기 위하여 총 6개 측선을 중심으로 울릉도 나리분지와 알봉분지 주변 지하 칼데라 퇴적층과 지질 구조를 파악하기 위하여 기존의 쌍극자배열법(A 방법과 C 방법)의 탐사결과와 함께 변형된 쌍극자배열법(D 방법)을 적용하여 연구를 수행하였다. 본 연구결과, 변형된 쌍극자배열법을 적용하여 최적의 지하 비저항 분포단면 분석을 통해 퇴적층과 연약대가 분포하는 구간인 500 ohm-m 이하의 저비저항대와 화산암체인 조면안산암질 암류가 분포하는 5,000 ohm-m 이상의 고비저항대의 경계를 명확하게 파악할 수 있었다. 알봉분지의 퇴적층은 평균 50~100m 내외, 나리분지의 퇴적층은 평균 약 100~200m 내외의 두께로 분포하는 것으로 추정되며, 칼데라 단층으로 추정되는 이상대는 지표부근에서 탐사심도 하부까지 500 ohm-m 이하의 저비저항대가 수직으로 연장성을 가지면서 암반 내 연약대와 구분되는 것으로 분석되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1319-1324
• /
• 2007

Many researches have been performed to analyze the smoke movement in tunnel fires by using field model. Recently, FDS(Fire Dynamics Simulator) v.4, which is one of the field model and developed from NIST(National Institute of Standards and Technology), is widely used. In tunnel fires, FDS can show detail results in local point, but it has difficulties in boundary condition and taking long computing time as the number of grid increases. So, there is a need to use alternative method for tunnel fire simulation. A zone model is different kind of CFD method and solves ordinary differential equation based on conservation and auxiliary equations. It shows good macroscopic view in less computing time compared to field model. In this study, therefore, to confirm the applicability of CFAST in tunnel fire analysis, numerical simulations using CFAST are conducted to analyze smoke movement in longitudinal ventilation reduced-scale tunnel fires. Then the results are compared with experimental results. The differences of temperature and critical velocity between numerical results and experimental data are over $30^{\circ}C$ and 0.9m/s, respectively. These values are out of error range. It shows that CFAST 6.0 is hard to be used for tunnel fire simulation.

• 소성∙가공
• /
• 제13권6호
• /
• pp.540-545
• /
• 2004

Ever since the ideal forming theory has been developed for process design purposes, application has been limited to sheet forming and, fur bulk forming, to two-dimensional steady flow. Here, application for the non-steady case was performed under the plane-strain condition based on the theory previously developed. In the ideal flow, material elements deform following the minimum plastic work path (or mostly proportional true strain path) so that the ideal plane-stram flow can be effectively described using the two-dimensional orthogonal convective coordinate system. Besides kinematics, fur a prescribed final part shape, schemes to optimize a preform shape out of a class of initial configurations and also to define the evolution of shapes and boundary tractions were developed. Discussions include the two problematic issues on internal tractions and the non-monotonous straining. For demonstration purposes, numerical calculations were made for a bulk part under forging.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.135-149
• /
• 2003

The bubble packing method is implemented for adaptive mesh generation in two and three dimensions. Bubbles on the boundary of a three-dimensional domain are controlled independently of the interior bubbles in the domain, and a modified octree technique is employed to place initial bubbles in the three-dimensional zone. Numerical comparisons are made with other mesh generation techniques to demonstrate the effectiveness of the present bubble packing scheme for two- and three-dimensional domains. It is shown that this bubble packing method provides a high quality of mesh and affordable control of mesh density as well.

• 지질공학
• /
• 제8권3호
• /
• pp.285-296
• /
• 1998

옥천대의 심부 지질구조를 규명하기 위한 연구의 일환으로 옥천대 서남단의 주요 구조선과 대체로 직교 하는 70km의 측선을 따라 중력과 자력탐사를 수행하였다. 또한 측선을 포함하는 옥천대 서남부에 대한 최근의 암석학적 및 지화학적 연구성과를 요약하였다. 중력과 자력 측정치들을 보정하여 각각 부게이상과 총자기이상을 구했다. 중력과 자력이상은 옥천대 남쪽 경계인 장흥부근에서 급격히 변화한다. 이러한 부게이상의 급격한 증가는 선 캠브리아 편마암류와 상대적으로 밀도가 큰 중성 심성암류와의 사이에 상당히 큰 변위를 가진 심부의 정단층으로 설명이 가능하다. 이 단층은 옥천대의 형성과 진화에 중요한 역할을 한 단층으로 사료된다. 한편 중력이상과 자력이상의 근원이 같다는 가정아래 중력이상으로부터 가상의 자력이상을 계산하였다. 계산된 자력이상은 측선상의 50km 부근(장흥근처)까지는 대체로 중력이상과 일치하나, 그 이후에는 완전히 반대의 상관을 보여준다. 끝으로 잔여 부게이상을 만족하는 지하구조가 시행착오적인 순해법에 의하여 제시되었다. 여기서 초기모델은 지표지질과 역해법의 결과로부터 주어졌다.

• 한국지구과학회지
• /
• 제24권4호
• /
• pp.361-368
• /
• 2003

1978년에 규모 5.0의 지진이 발생한 홍성지역에 발달한 단층대의 전기, 전자적 특성을 조사하였다. 전기, 전자 탐사는 최근 토목공사현장에서 단층대 및 파쇄대 등의 연약지반을 확인하기 위한 수단으로 널리 쓰이고 있으며 이들 탐사로부터 얻어지는 전기비저항 구조는 연약대의 공간적 분포를 효과적으로 파악할 수 있는 정보를 제공한다. 홍성지역에 위치한 단층대를 가로질러 쌍극자배열 전기비저항탐사와 MT (Magnetotelluric) 탐사를 실시하였으며 역산을 통해 단층대의 전기비저항의 분포를 추정하였다. MT 탐사는 주단층대를 가로지르는 2.9 km의 측선상의 18측점에서 실시하였으며, 자기쌍극자를 인공 송신원으로 사용하였다 전기탐사는 단층대를 측선의 중앙으로 하여 전극간격이 50 m인 쌍극자배열전기비저항 탐사를 실시하였다. 두 탐사 결과는 예상단층선을 따라 좌우지역의 전기비저항이 서로 다른 양상으로 발달하고 있음을 보여주고 있으며, 특히 예상단층선을 따라서는 뚜렷한 저비저항대가 깊게 발달해 있음을 보여주고 있다. 홍성지역의 단층대에서 낮은 전기비저항분포를 보이는 부분이 수직으로 잘 발달해 있다는 것은 최근에 두 차례의 지진이 발생한 것처럼 이 지역 단층이 활동 중인 단층이라는 사실과 일치하는 결과를 보여주는 것이다. 본 연구 성과는 앞으로 홍성단층 뿐만이 아니라 우리나라에서 발생하는 지진들에 대한 연구에 기초 자료를 제공할 것이라 기대된다.