• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.1
• /
• pp.65-77
• /
• 1997

A theoretical and numerical investigation on the boundary-layer flow over a two- or three-dimensional hill is presented. The numerical model is based on the finite volume method with boundary-fitted coordinates. The k-$\varepsilon$ turbulence model with modified wall function and the low-Reynolds-number model are employed. The hypothesis of Reynolds number independency for the atmospheric boundary-layer flow over aerodynamically rough terrain is confirmed by the numerical simulation. Comparisons of the mean velocity profiles and surface pressure distributions between the numerical predictions and the wind-tunnel experiments on the flow over a hill show good agreement. The linear theory provides generally good prediction of speed-up characteristics for the gentle-sloped hills. The flow separation occurs in the hill slope of 0.5 and the measured reattachment points are compared with the numerical prediction. It is found that the k- $\varepsilon$ turbulence model is reasonably accurate in predicting the attached flow, while the low- Reynolds-number model is more suitable to simulate the separated flows.ows.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.16-21
• /
• 2006

In this study, the analytic realization of chatter mechanism using radial basis neural network(RBNN) was introduced and compared with the conventional stability analysis. In this regard, the FFT and time series spectrum analysis was used as a criterion for the existence of chatter in end-milling force. The desired coded outputs of chatter was trained and finally converged to desired outputs. The output of the RBNN match well with the conventional desired stability lobe. Using this trained data, the stability boundary of the radial basis neural network was acquired using the contour plotting. As a result, the proposed stability lobe boundary using RBNN consists well with the conventional analytical boundary that is calculated in characteristic equation of transfer function in chatter dynamics. In this RBNN analysis, two input and three output parameters were used in this paper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.4
• /
• pp.280-286
• /
• 2002

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boundary layer in the low noise wind tunnel. From this experiment we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and find the relations between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.603-616
• /
• 1995

Presented in this paper is an algorithm to obtain the intersections of a polyhedral surface composed of triangle facets with a series of parallel planes for extracting machining information from the surface. The change of the topology of the intersection curves is caused by characteristic points of the surface when sectioning the surface with parallel planes. The characteristic points are internal maximum, internal minimum, internal saddle, boundary maximum, boundary minimum, boundary max-saddle, and boundary min-saddle points. The starting points of the intersects are found efficiently and robustly using the characteristic points. The characteristic points as well as the intersection contours can be used to evaluate the machining information for process planning, and to generate NC tool path in CAD/CAM system.

• Journal of Korean Academy of Nursing Administration
• /
• v.19 no.1
• /
• pp.17-27
• /
• 2013

Purpose: This study was done to explore how nurses manage the boundary for work-family balance. Methods: Data were collected through in-depth interviews from February 1 to May 28, 2012. Participants were 13 married nurses with children. The constant comparative method was adapted for data analysis. Results: In this study, nurses' work-family boundary management had characteristics of integration, maintenance and control, but it was adjusted and modified over time as the order of priorities was rearranged according to changes in internal cognition and family support. Nurses strategically persuaded their families to understand their work and share housework in an effort to integrate work and family, while controlling them by managing working hours and time for themselves. Conclusion: The results of the study indicate that nurses' work has an impact on family life due to heavy workload and insufficient time, however the work-family balance can be successfully maintained with the effective separation of the two areas.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.683-686
• /
• 2002

The hydrodynamic instability of the three-dimensional boundary-layer over a rotating disk has been numerically investigated for three cases flows using linear stability theory (i.e. Rossby number, Ro = -1, 0, and 1). Detailed numerical values of the disturbance wave number, wave frequency, azimuth angle, radius (Reynolds number, Re) and other characteristics have been calculated for $K{\acute{a}}rm{\acute{a}}n$, Ekman and $B{\"{o}}ewadt$ boundary-layer flows. Neutral curves for these flows are presented. Presented are the neutral stability results concerning the two instability modes (Type I and Type II) by using a two-point boundary value problem code COLUEW that was based upon the adaptive orthogonal collocation method using B-spline. The prediction from the present results on both instability modes among the three cases agrees with the previously known numerical and experimental data well.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.2
• /
• pp.122-125
• /
• 2011

In this work, the movement pattern of a floating breakwater is numerically analyzed using Smoothed Particle Hydrodynamic (SPH) method as a Lagrangian scheme. At the seaside, the regular incident waves with varying height and period were considered as the dynamic free surface boundary conditions. The smooth and impermeable beach slope was defined as the bottom boundary condition. The effects of various boundary conditions such as incident wave characteristics, beach slope, and water depth on the movement of the floating body were studied. The numerical results are in good agreement with the available experimental data in the literature The results of the movement of the floating body were used to determine the transmitted wave height at the corresponding boundary conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.923-928
• /
• 2012

In this paper, static and oscillatory instability of a nanotube conveying fluid and modelled as a thin-walled beam is investigated. Analytically nonlocal effect, effects of boundary conditions, transverse shear and rotary inertia are incorporated in this study. The governing equations and the two different boundary conditions are derived through Hamilton's principle. Numerical analysis is performed by using extend Galerkin method which enables us to obtain more exact solutions compared with conventional Galerkin method. Variations of critical flow velocity for different boundary conditions of a nanotube with analytically nonlocal effect, partially nonlocal effect and local effect of a nanotube are investigated and pertinent conclusion is outlined.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.204-206
• /
• 2005

Although intensive experiments have been performed to investigate the origin of boundary image sticking, one of major factors to determine display quality in AC PDP, it has not being reported clearly why it is occurred. The relationships between boundary image sticking and its possible origins such as phosphor degradation, temporal change of MgO layer, wall charge have been discussed. In this paper, we have analyzed characteristics of the boundary image sticking more clearly by the influence of local panel temperature.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.270-273
• /
• 2007

In this paper, a SAR-despeck1ing approach of adaptive iteration based a Bayesian model using the lognormal distribution for image intensity and a Gibbs random field (GRF) for image texture is proposed for noise removal of the images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel types as states of molecules in a lattice-like physical system. The iterative approach based on MRF is very effective for the inner areas of regions in the observed scene, but may result in yielding false reconstruction around the boundaries due to using wrong information of adjacent regions with different characteristics. The proposed method suggests an adaptive approach using variable parameters depending on the location of reconstructed area, that is, how near to the boundary. The proximity of boundary is estimated by the statistics based on edge value, standard deviation, entropy, and the 4th moment of intensity distribution.