• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.349-364
• /
• 2014

Perfectly matched layers are employed in time harmonic analysis of dam-foundation systems. The Lysmer boundary condition at the truncation boundary of the PML region has been incorporated in the formulation of the dam-foundation FE model (including PML). The PML medium is defined in a way that the formulation of the system can be transformed into time domain. Numerical experiments show that applying Lysmer boundary conditions at the truncation boundary of the PML area reduces the computational cost and make the PML approach a more efficient technique for the analysis of dam-foundation systems.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.379-390
• /
• 2020

Four full-scaled partially confined and unconfined masonry panels were tested with monotonic lateral loads. To study the effects of vertical force and boundary columns, two specimens with no boundary columns were subjected to different vertical forces, while two wing-wall specimens had the column placed eccentrically and in the middle, respectively. The specimens with no boundary columns exhibited ductile rocking behavior, where the lateral strength increased with increasing vertical compression. The wing-wall specimens with columns behaved as strut-and-tie systems. The column-panel interaction resulted in greater strength, lower deformation capacity and differences in failure modes. A comparison with analytical models showed that rocking strength can be accurately estimated using vertical force and the panel aspect ratio for panels with no boundary columns. The estimation for lateral strength on the basis of a panel section area indicated scattered error for wing-wall specimens.

• 한국멀티미디어학회논문지
• /
• 제6권6호
• /
• pp.991-999
• /
• 2003

본 논문에서는 호흡에 의하여 변화하는 기도 내부 영역의 형태학적인 정보를 반영할 수 있는 EBCT를 이용한 영상 획득 기법과 이 기법을 이용하여 획득한 단층 영상으로부터 기도 내벽의 윤곽선을 자동적으로 검출하는 방법을 제안하였다. 기도의 각 준위에 대한 영상데이터들을 적용한 컴퓨터 시뮬레이션 결과들을 통하여 제안한 방법이 효과적으로 기도의 윤곽선을 검출함을 확인하였으며 시간적 변화에 따른 기도 내벽의 단면적인 변화를 볼 수 있었다. 따라서, 제안한 방법이 임상에서의 정량적 평가에 활용할 수 있을 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.270-273
• /
• 2007

In this paper, a SAR-despeck1ing approach of adaptive iteration based a Bayesian model using the lognormal distribution for image intensity and a Gibbs random field (GRF) for image texture is proposed for noise removal of the images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel types as states of molecules in a lattice-like physical system. The iterative approach based on MRF is very effective for the inner areas of regions in the observed scene, but may result in yielding false reconstruction around the boundaries due to using wrong information of adjacent regions with different characteristics. The proposed method suggests an adaptive approach using variable parameters depending on the location of reconstructed area, that is, how near to the boundary. The proximity of boundary is estimated by the statistics based on edge value, standard deviation, entropy, and the 4th moment of intensity distribution.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1207-1216
• /
• 1988

본 연구에서는 이 염색격자법을 이용하여 가장 기본적인 복합재인 탄성계수가 서로 다른 두 물체로 구성된 2상적합재를 제작할 수 있는가를 검토하였고, 또한 제작 완성된 접합재를 이용하여 접합경계면 부근의 국소영역에서의 3차원적인 변형거동을 관찰한 것이다.

• 한국해양공학회지
• /
• 제26권5호
• /
• pp.55-62
• /
• 2012

In this paper, the rigid lid boundary condition is applied to simulate the influence of floating structures such as ships or pontoons, and the pressure term in both the momentum equations and continuity equation are modified. The pressure of a floating structure under the free surface is dependent on the draft of the structure, generally called a ship. If the free surface is covered by a floating structure, the free surface cannot move freely. The water level should be fixed, using a rigid lid boundary condition. This boundary condition is implemented by reducing the storage area of the grid cell with a factor between zero and one. The numerical model developed by Hong (2009) is verified through a comparison with experimental results, and the influence of the reduction factor is investigated using the verified numerical model.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.163-168
• /
• 2008

In a today, our concerns have been changed from a single material to relation, communication and time. The human life made up of science, technology, philosophy and art of the modern society can decide whoerness by connecting or replacing a comprehensive and many kinds. This one is exhibited in interior actively. The space of the pluralistic world is sustained by not simple and fixed relation but complex and flexible relation. And it is shown as an undecided phenomenon by effecting and modifying each other. In here, the boundary has a phase of undecided relation but at the same time it can make possibility to be abundant to infinity. The purpose of our study with considering the uncertainty of the boundary is to solve the discord of between division and unify of modern architecture space and suggest new way to be mediation and to occupy independent area.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1177-1185
• /
• 1996

The crack growth under creep condition is one of the major damage mechanisms which determines remaining life of the component operating at high temperatures. In this paper, the creep crack growth by grain boundary cavitation is studied, which is frequently observed failure mechanism for creep brittle materials. As a result of diffusive growth of creep cavities, it is shown that the crack-tip stress field is modified from the original stress distribution by the amount of singularity attenuation parameter which is function of crack growth rate and material properties. Also, the stress relaxation at crack-tip results in the extension of cavitating area by the load dump effect to meet the macroscopic force equilibrium conditdion.

• 정보처리학회논문지B
• /
• 제16B권6호
• /
• pp.479-488
• /
• 2009

본 논문은 기존의 목표항목만을 위주로 한 학습체계에서 발생하는 오분류 문제의 해결을 위해 기존의 학습체계에 경계항목을 자동으로 탐 색하여 포함시켜 확대시키는 방법을 제안하고 있다. 여러 주제에 걸쳐 다양한 내용을 다루는 복잡한 문서들은 확실히 어느 범주로 분류해야 할 지 판가름하기 어려운 성질인 모호성이 강하다. 이러한 경우 모든 경우들을 정확히 구분할 수 있는 최적의 경계를 찾는 일은 더욱 어려운 일이 다. 복잡하고 불확실성이 높은 데이터들의 특징은 대부분 분류 경계영역에 위치하므로 이러한 분류경계의 데이터들을 새로운 학습 항목으로 인 식시키도록 하는 것이 필요하다. 본 연구에서는 주어진 목표항목 사이의 경계항목을 자동으로 탐색하여 학습체계에 추가하는 학습 체계 확장 알고리즘을 제시하고, 의도적인 학습오류를 발생시킨 후 기존방법과의 비교실험을 수행함으로써 제안방법의 정확성과 안정성을 비교하였다. 실 험결과 경계범주를 포함하여 학습 체계를 확장시켰을 때의 예측력은 기존 0.70에서 0.86으로 약 24% 향상 되었고, 오류를 포함시켰을 때의 예 측력은 기존 0.52에서 0.79로 약 49% 향상되었다.