• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.37-47
• /
• 1995

Forging of trapezoidal spline, serration and square spline with solid cylindrical billets and hollow one has been investigated by means of upper bound method. Kinematically admissible velocity fields for forging of splines have been proposed in this study. The half pitch of splines has been divided into deformation regons. The neutral surface is introduced into forging of splines with flat punch and, for each step, it is assumed as a circle with its radius rn upper bound solutions obtained obtained by proposed kinematically admissible velocity fields are useful to predict the loads for forging of splines.

• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.1
• /
• pp.33-40
• /
• 1998

The cross peak intensities versus mixing times of 2D NOESY spectrum for a corepressor L-trp were simulated for the case of a ligand exchanging between free (AX) and bound (A'X') forms in protein/DNA complex. The direct NOE (I(AX)) of the free ligand exhibited a small positive intensity indicative of the strong dominant influence of the bound ligand. The exchange-mediated NOE peak (I(AX')) was very sensitive to corepressor exchange. However, both diagonal (I(A'A')) and direct NOE (I(A'X')) intensities of the bound ligand were not affected much at initial stage. Both peaks were severely influenced by exchange at mixing times of greater than 100 ms. In conclusion, since the NOE intensity is a function of exchange rate, the exchange effect should be considered to properly extract accurate distance information for bound ligand in the presence of conformational exchange.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.750-755
• /
• 2009

Tomlinson-Harashima precoding (THP) is considered as a prominent precoding scheme due to its capability to cancel out the known interference at the transmitter side. Therefore, the information rates achieved by THP are superior to those achieved by conventional linear precoding schemes. In this paper, a new lower bound on the achievable information rate by the regularized THP under additive white Gaussian noise (AWGN) channel with multiuser interference is derived. Analytical results show that the lower bound derived in this paper is tighter than the original lower bound particularly at low SNR range, while both lower bounds converge to the same lower limit as SNR$\rightarrow$$\infty$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.145-155
• /
• 1996

The extrusion velocity of billet through a die and the shapes of the die are the important factors in the metal forming process of the extrusion of billet. in recent years, the life cycle of products is goingfaster. Although the former finite element method was capable of yielding a detailed analysis, it requires lots of time and extensive coding effort. Then, some simple devices were developed and based on upper bound method. For this purpose , a kinematically admiasible velocity field is formulated for extrusion of cylinders with arbitrary cross section and die profile on their outer surfaces by using a modified upper bound approach, which configures simulataneous extruding speeds in three directions . Also, In order to display mesh of the cold forward extrusion process using the approach , the automatic three-dimentional mesh generation produced by the approach coupled finite element method with upper bound method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.23-30
• /
• 1996

The purpose of this study was to investigate changes in thewall thickness of tube sinking and working forces by the upper bound method and ABAQUS code. The independent variables were : Workpiece material, original wall thickness of tube, die angle, friction, and diameter reduction. The results indicated that of these five variables were a factor in wall-thickness increase and working forces. Three variables, a inner tube wall angle and two angles of the velocity discontinuous surfaces, are optimized in this proposed velocity field by the upper bound method. In this method, we can estimate the working forces and final tube thicknesses whcih are similar to acturla forming process. Optimized process variables which are obtained by upper bound method are used in ABAQUS pre-model . In ABAQUS analysis, the stress and the strain contours which are considered to be heat generation occured by the friction during forming process are observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.93-104
• /
• 1991

Limit analysis is based on the duality theorem which equates the least upper bound to the greatest lower bound. In this study, limit analysis of axisymmetric forming problem with workhardening materials is formulated by minimizing the upper bound functional and finite element program is developed for forward estrusion. Limit loads, velocity and flow line fields are directly obtained under various process conditions and deformation characteristics such as strains, strain rates and grid distortion are obtained from the optimum velocity components by numerical calculation. The experimental observation was carried out for extrusion and compared with computed results. The good agreement between theoretical and experimental results is shown that the developed programming is very effective for the analysis of axisymmetric extrusion.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2943-2948
• /
• 2010

Silica monolith powders were prepared by a new procedure where ground powders of proper size distribution were obtained without sieving. An initiator was attached to this ground monolith and polystyrene was bound by reversible addition-fragmentation chain transfer polymerization to give a new stationary phase. The separation efficiency of this phase was found better than that of the polystyrene bound phase based on conventional silica particles and that of the C18 bound silica monolith powders.

• Elastomers and Composites
• /
• v.17 no.1
• /
• pp.13-21
• /
• 1982

The purpose of this dissertation is to compare bound andtioxidant, MHPPD with the ordinary one, IPPD, when high polymers are used like NR and SBR. The effect of rubber bound antioxidant and ordinary antioxidant on the Mooney scorch time has been studied by means of the Mooney viscometer. The ageing properties of vulcanizates containing rubber-bound antioxidant and ordinary antioxidant have been studied in terms of hardness, tensile strength and elongation. The results of the Mooney scorch time and ageing properties are as follows: When MHPPD was mixed with NR or SBR compounds, the Mooney scorch time was faster than the IPPD compounds. Also the ageing properties of the vulcanizates containing MHPPD were much superior to the IPPD compounds. Furthermore, the vulcanizates comporised of MHPPD have taken andvantage of and resistance in the ozone test.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1780-1783
• /
• 2002

A problem of signal transmitted and received in OFDM systems is considered. In particular, an efficient solution to the problem of blind channel estimation based on Maximum Likelihood (ML) principle has been investigated. The paper proposes a new upper-bound cost, used in conjunction with a standard branch and bound integer programming technique for solving the ML problem. The tighter upper-bound cost exploits a finite-alphabet property of the transmitted signal. The proposed upper-bound cost was found to greatly speed up the ML algorithm, thus reducing computational complexity. Experimental results and discussion are included.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.7
• /
• pp.410-417
• /
• 2003

In this paper, We propose a new target tracking filter which utilizes PDA-AI for data association in a clutter environment and also propose an analytic solution for ideal filter covariance which accounts for all the possible events in PDA-AI. Monte Carlo simulation for the proposed filter in a clutter environment indicates that the proposed analytic solution forms a tight lower bound for the error covariance of PDA-AI filter.