• 패션비즈니스
• /
• 제17권1호
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.641-650
• /
• 2008

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.93-114
• /
• 1988

The purpose of this study was to develop pattern drafting methods of bodice, sleeve and skirt for Korean women at the age of 18 to 34. The study procedures and results were as follows; 1. 305 women aged 18 to 34 were measured on 49 items. 56 items including 49 measured and 7 calculated items were analyzed statistically. 2. New pattern drafting methods were developed based on the results of the data analysis. Basic shells constructed from the patterns were examined through fitting tests for completion. 3. The sensory test was applied to evaluate the new pattern for women by comparing it with one of the most used conventional patterns. An original rating scale was developed and used for the evaluation. According to a statistical analysis of the result of the 53 items on the questionnaire, all the items showed significant difference ($\alpha{\leqq}0.01$ or $\alpha{\leqq}0.05$) between the two, with the new pattern having higher scores. The new drafting method proved to be better fitted at all 53 items, and to be comfortable.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.205-210
• /
• 2020

본 연구의 목적은 소비자의 의류제품에 대한 만족도를 높이기 위해, 20대 여성 정장용 상의 원형의 그레이딩 편차를 제안하는 것이다. 선정된 원형은 독일 뮐러 원형과 일본 문화 원형이 절충된 것이다. 국민표준체위조사 데이터에 의거하여 20대 여성의 주요치수 평균을 설정하였다. 상의 몸판과 소매의 그레이딩 편차 적용 부위별 그레이딩 편차를 설정하고 그에 따라 그레이딩하고 그레이딩 패턴의 적합성을 점검하였다. 본 연구에서 제안한 여성 20대 정장상의 원형 그레이딩 편차는 업계 그레이딩 실행에 기초 자료로 제공될 수 있다.

• 대한가정학회지
• /
• 제41권7호
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• 한국가정과교육학회지
• /
• 제5권1호
• /
• pp.45-59
• /
• 1993

The aims of this study are to develop CAI programs for bodice and sleeve pattern drafting for the 3rd grade students in a middle school and to compare the students’achievement degree in using traditional teaching method with that in using CAI programs. On the basis of results above the direction and possibility of using computers in education home economics is another aim. For this study, after the programs are developed, which is on the model of middle school text book, one hundred girl students of 2nd grade of middle school in Songpa Gu, Seoul, who have never given Bodice and Sleep Pattern Drafting lesson are chosen. The students are divided into two groups: one is called comparison group, which is taught by traditional method, the other, experimental group, which is taught by CAI programs. To evalute the learning achivement degree, evaluation test, effectiveness of learning and interest degree test and time test are given. Questionaire investigation about CAI program is given to experimental group. The results of this study are as follows: 1. CAI programs on pattern drafting are developed and can be used in the class. 2. In the tests of achievement degree, of effectiveness, and of interest the experimental group gets higher scores than the comparison group. 3. In the time test about how many students can draft the pattern in a given time, in every step more students in experimental group finished drafting than the comparison group. 4. The students showed interest in CAI programs and played an active part in the using computers. Therefore, using CAI programs in the class of pattern drafting saved the teachers lots of difficulties and enables individual learning improving the effectiveness of learning. I hope the studies of CAI will be established in other field as well as Home Economics, especially clothing part, and computers will be used lively

• 한국지역사회생활과학회지
• /
• 제28권1호
• /
• pp.69-79
• /
• 2017

The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.

• 한국의류학회지
• /
• 제12권2호
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.

• 복식문화연구
• /
• 제21권5호
• /
• pp.742-754
• /
• 2013

This study aims to conduct a investigation on the gusset of a Kimono sleeve to achieve excellent movability through an evaluation of its fit wearing by conducting comparative research in terms of the length of the gusset pattern according to sleeve angle, which having a great effect on the wearing and activity of the top of a Kimono sleeve. A prototype was manufactured by developing the basic Kimono sleeve based on the method of Ernestine Kopp's basic bodice pattern. The sleeve angles which was applied to the prototype pattern of the Kimono sleeve ware approximately $50^{\circ}$, $70^{\circ}$ and the gusset was diamond-shaped which has a width of 10cm and lengths of 9cm, 10cm and 11cm. As a result, in the case of $55^{\circ}$ of the sleeve angle, the angle was gradually increased as the length of gusset was extended, although, in the case of $68^{\circ}$ of the sleeve angle, there was not remarkable effects between increased gusset length and the value of the angle. This result could be analyzed that the gusset did not affect remarkably since the sufficient movability was gained with only the angle in the case of $68^{\circ}$. Also, in the results of experiment on $55^{\circ}$ angle, as 9cm, 10cm and 11cm of length of gusset commonly indicated over $70^{\circ}$ in average, it was found that the movability was obtained sufficiently in every part.

• 대한가정학회지
• /
• 제25권2호
• /
• pp.13-23
• /
• 1987

The present study is undertaken to utilize the computer in pattern making of Jeugo-ris for women. The results are as follow: 1. Basic points which can be connected to depict basic pattern are represented with the numerical expreession and the curved lines consist of three types of arc. 2. The patterns of Jeugo-ris were automatically depicted by inputting the standard size(large, medium and small) and body measurements for bodice(bust girth, center back length, sleeve length). 3. This program includes the function of expressing the specific parts of patterns and of extending the patterns with or without standard lines.