• Computers and Concrete
• /
• v.24 no.1
• /
• pp.85-94
• /
• 2019

The ACI building code is allowing for higher strength reinforcement and concrete compressive strengths. The nominal strength of high-strength concrete columns is over predicted by the current ACI 318 rectangular stress block and is increasingly unconservative as higher strength materials are used. Calibration of a rectangular stress block to address this condition leads to increased computational complexity. A triangular stress block, derived from the general shape of the stress-strain curve for high-strength concrete, provides a superior solution. The nominal flexural and axial strengths of 150 high-strength concrete columns tests are calculated using the proposed stress distribution and compared with the predicted strength using various design codes and proposals of other researchers. The proposed triangular stress model provides similar level of accuracy and conservativeness and is easily incorporated into current codes.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.121-122
• /
• 2003

In this study a microchannel with various arrangement of blocks is newly proposed. This design comprises periodically arranged simple blocks. In this configuration, the stirring is greatly enhanced at a certain geometric parameter set. To characterize the flow field and the stirring effect both the numerical and experimental methods were employed. To obtain the velocity field, three-dimensional numerical computation to the Navier Stokes equations are performed by using a commercial code, FLUENT 6.0. The fluid-flow solutions are then cast into studying the characteristics of stirring with the aid of Lyapunov exponent. The numerical results show that the particles' trajectories in the microchannel heavily depend on the block arrangement. It was shown that the stirring is significantly enhanced at larger block-height and it reaches maximum when the height is 0.8 times the channel width. We also studied the effect of the block stagger angle, and it turns out that the stirring performance is the best at the block angel ${45^\circ}$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.517-518
• /
• 2023

최근 뇌-컴퓨터 인터페이스 분야에서는 뇌파 신호를 이용한 운동 심상 분류 연구가 활발히 이루어지고 있다. 뇌파는 개인별 차이가 큰 생체 신호로, 사용자에 독립적인 경우 추론이 어려워지는 문제가 있어 운동 심상 분류에서는 주로 피험자 종속적인 연구가 행해져 왔다. 본 논문에서는 컨볼루션 신경망 기반의 뇌파 분류 모델인 EEGNet 에 새로운 방식으로 개선한 Squeeze-and-Excitation block 을 적용해 피험자에 대해 독립적인 운동 심상 분류 성능을 향상시키는 방법을 제안하며, 제안한 Squeeze-and-Excitation block 을 적용한 모델이 기존 모델보다 높은 분류 성능을 보여주는 것을 실험적으로 확인하였다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.60-70
• /
• 2001

This landscape design proposal was presented to a design competition for Gwangjin-gu Community Center and Assembly Hall. The site is located in 227-7 Jayang-dong, Gwangjin-gu, Seoul and is part a block designated as \`Kunkuk University Detailed Planning District\`. The judging criteria for landscape design set by the Gwangjin-gu could be articulated as follows: an identity of Gwangjin-gu, a relationship with surrounding environment, a locale as a community center of Gwangjin-gu, and an environment-friendly design. An identity of Gwangjin-gu was expressed by introducing lends and decks around the building which were transformed from the image of the old Gwangjin Ferry. The concept\` was strengthened by \`Nori-madang\` or Korean version of \`plaza\` which was designed by a motive of \`mungsuk\` or Korean old fashioned straw mat. An ambiguous relationship between the site and the surroundings was set by \`transparent exhibition frame\` which not only bleaks the massive Chungdam-daegyo, an elevated road, and frames it into small parts, but also attracts pedestrians toward the site-the \`park\`. Pedestrians from the adjacent\` Nengdong-ro Walkable Streets\` views the site through the many parts of frames. By introducing diverse resting and dynamic spaces for many kinds of cultural activities the site could function as a locale of the Gwangjin-gu community. The main paving system reflects the environment- friendly design. It was detailed by \`PC-block-deck-paving\` which was elevated from the ground so that rains could be absorbed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.2
• /
• pp.51-59
• /
• 2013

Purpose: At the moment, a lot of poor older people live in permanent rental housing in Korea. But many rental apartments are not suitable for elderly living because most of them have many problems related to the lack of accessibility and adaptability for older people with physical and mental disabilities. So it is necessary to upgrade the old permanent rental housing for convenience of elderly living. The purpose of this paper is to construct basic data for remodeling of worn out and small rental housing block in order to realize the concept of "Aging in Place". Methods: Questionnaires and interviews about elderly living have been conducted on 104 elderly who live in Suwon Wooman permanent rental apartment block which was constructed 21 years ago. From the collected data, dining pattern, inconvenient area, small area, satisfaction level on unit area and demand for unit expansion type have been analysed in order to find out the direction for remodeling of permanent rental apartment unit. Results: The problems of existing permanent rental apartment can be summarized into improper laundry space, small dining area, inconvenient bath and so on. According to the family size, the elderly resident has the different preference about the expansion type of his resident unit. Big families usually want to enlarge their living unit though they pay for additional monthly rental fee. Implications: Lifetime home concept adopting Universal Design has to be applied to the whole residential block especially to the social rental housing. And this concept had better be expanded to Lifetime neighbor design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.333-337
• /
• 2004

This paper describe a design of 5GHz OFDM baseband chip for IEEE 802.11a wireless LAN. The proposed device is consists of transmitter and receiver within a single FPGA chip. We applied single tap equalizer that use Normalized LMS algorithm to remove ISI that happen at high speed data transmission. And also, we used carrier wave frequency offset algorithm that use training symbol to remove ICI. The simulation results show the correct transmission without errors the between transmitter and receiver And we can remarkably reduce the number of register through the synthesized circuits by using DSP block and EMB(Embedded Memory Block). The target device for implementation of the synthesized circuits is Altera Stratix EPIS25FC672 FPGA and design platform is VHDL.

• Science of Emotion and Sensibility
• /
• v.5 no.3
• /
• pp.21-28
• /
• 2002

In order to reflect emotion and sensibility of consumers to textile pattern design, the effect of design elements of block stripe pattern on sensitivity was investigated. The stimuli were manipulated with 4 design elements of value difference (3 levels), arrangement (2 levels), width (2 levels) and interval (3 levels). Among the 36 combinations, 27 stimuli, which showed independent sensibility results in the pretest, were adopted as final stimuli. Male and female university students (n=30) evaluated each sensibility subjectively using a questionnaire developed for this study. The effect of design elements on 12 sensibility dimensions drawn by factor analysis and the relationships between the physical quantities of each stimulus and the sensibilities were investigated. As the results of ANOVA for the effect of design elements on sensibility, there were more significant differences in sensibility in the orders of value difference, interval, width, and arrangement. The value difference showed the highest explanatory power. Looking at the sensibility differences according to the level of design elements, the narrower the width of the stripe, the more 'humble', 'clean', 'modern', 'simple', and 'comfortable', and the narrower the interval between stripes, the more 'impressive' and 'conservative' The smaller the value difference, the more 'luxurious', 'modern', 'humble', 'simple', 'soft', and 'clean'. Regression models to predict the 12 sensibilities showed higher values of goodness of fit except 'conservative', 'casual' and 'modern', which were all over 0.6. Based on these results, 2 design prototypes reflecting consumer's sensibility were presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.662-672
• /
• 2011

This paper presents a new edge-preserving algorithm and its VLSI architecture for block artifact reduction. Unlike previous approaches using block classification, our algorithm utilizes pixel classification to categorize each pixel into one of two classes, namely smooth region and edge region, which are described by the edge-preserving maps. Based on these maps, a two-step adaptive filter which includes offset filtering and edge-preserving filtering is used to remove block artifacts. A pipelined VLSI architecture of the proposed deblocking algorithm for HD video processing is also presented in this paper. A memory-reduced architecture for a block buffer is used to optimize memory usage. The architecture of the proposed deblocking filter is prototyped on FPGA Cyclone II, and then we estimated performance when the filter is synthesized on ANAM 0.25 ${\mu}m$ CMOS cell library using Synopsys Design Compiler. Our experimental results show that our proposed algorithm effectively reduces block artifacts while preserving the details.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.2 s.115
• /
• pp.18-25
• /
• 2006

This study aims to measure and to analyze the thermal environment characteristics of the various permeable pavement materials such as grass pavement (GREEN BLOCK PARK), stone and grass pavement (GREEN BLOCK STEP), stone pavement (GREEN BLOCK MOSAIC) and wood pavement (WOOD BLOCK) under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, changes of the temperature on each pavement layer, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 5, 2005, $34.0^{\circ}C$) of the you. Some of main findings are: 1) The heat environment was worse on the wood pavements than on the stone pavement. This is mainly due to the low albedo of the wood pavements (0.37) while the albedo value of stone pavements is 0.41. Small heat capacity of the wood pavements also contributes to this difference. 2) The heat environment was worse on the stone pavements than on the turf pavements. This was mainly due to the evapotranspiration of the plant growth layer of the turf pavements. 3) The peak surface temperature was the highest on the wood pavements ($56.1^{\circ}C$). The peak surface temperatures on the stone pavements, the stone-grass pavements and the grass pavements were $43.1^{\circ}C,\;40.1^{\circ}C\;and\;37.9^{\circ}C$, respectively. 4) To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.944-956
• /
• 2016

In this paper, we propose a new hardware architecture to generate computer-generated holograms based on the block based calculation method and implement a VLSI (very large scaled integrated circuit) in ASIC (application specific integrated circuit) environment. The proposed hardware has a structure that can produce a part of a hologram in the unit of a block in parallel. After calculating a block of a hologram by using an object point, the calculation is repeated to all object points and intermediate results from them are accumulated to produce a final block of a hologram. Through this structure, we can make various size of holograms with the optimized memory access in real-time operation. The proposed hardware was implemented in the Hynix 0.18um CMOS technology of Magna chip Inc. and has 876,608 gate counts. It can generate complex holograms unlike the previous researches and stably operate in the clock frequency of 200MHz.