• Explosives and Blasting
• /
• v.13 no.4
• /
• pp.73-81
• /
• 1995

Explosives demolition mothod is allowed for more efficient time-saving and safer demolitioni operations as compared to conventional / mechanical demolition methods. CDI has to minimize the effects of noise, dust and various demolition hazards to the public areas, and residences that are located adjacent to the project site. CDI's explosives demolition work on the Nam san Foreigner's Apartment Complex and chosun trading Co's factory are backed by over 45 years of explosives experience in the demolition of over 6,000 structures worldwide, many of these structures are similar to the Nam san Foreigner's Apt. and Chosun trading's factory in construction and proximity to sensitive adjacent exposures. Recoginized worldwide as the founder of the leader in explosives demolitioni technology, CDI always will applied "State-of-the-Art" explosives techniques to safely and successfully achieve the desired demolition results on these project. CDI has never injured, much less caused any fatality, to either a worker on one of our sites or to a third party during the implosion of high-rise structure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.531-537
• /
• 1998

Recently, the pile driving or blasting works are increasingly done in many areas to perform large scale construction projects. The vibrations from these blasting works may affect the properties of concrete, especially young concrete. The purpose of present study is to explore the effects of vibration at early ages on the properties of concrete. To this end, comprehensive experimental study is conducted in the present study. The major test variables are peak particle velocity or vibration velocity and the age at vibration. The compressive strengths and bond strengths are measured for all the specimens at 28days after casting. The duration of vibration is fixed to 30 minutes for all cases. The results indicate that the strength increases for vibration velocity less than about 0.25cm/sec and decreases for vibration velocity larger than 0.5cm/sec. The effect of age at vibration is not pronounced and shows almost similar behavior for the age at vibration of 0 to 12 hours range. The present study provides some important guidelines to control the construction or vehicle vibrations for the concrete at very early ages.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.33-45
• /
• 2007

In this study, the blast-induced vibration effects on the structural stability of the adjacent tunnel were estimated with respect to the allowable peak particle velocity (PPV). The blasting distance from the tunnel satisfying the allowable PPV was estimated based on the analytical solutions, United States Bureau of Mines (USBM) suggestions, and the equations used in the subway in Seoul. The allowable blasting distance was estimated by using finite difference analysis (FDA) and the behavior of the concrete lining and rock bolts was examined and the stability of those was estimated during the blast. Research results show that the blast-induced vibration effects on the structural stability are negligible for the concrete lining but relatively large for the rock bolts.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.83-87
• /
• 2003

Experimental blast studies were carried out in a limestone quarry to study the effects of blasting on structures. To have an in-depth understanding of the possible relation between parameters like vibrations, frequency and scale distance and ten trial blast were conducted. 29 monitoring stations were located in such a pattern to give a true representation of blast induced vibrations for the entire mining in this area. The vibrations were monitored in the vicinity of structures surrounding the quarry in the direction towards the village, road, railway line, office building, etc. Scale distances were determined to identify the maximum charge permissible to cause damage to structures.

• Explosives and Blasting
• /
• v.34 no.2
• /
• pp.1-9
• /
• 2016

In this study, the field tests were performed on V-cut, PLHBM 1 hole, PLHBM 2 hole in gneiss area in order to compare the effects of the vibration decay of a tunnel cut-hole according to the number of PLHBM holes with scaled distance. Based on the prediction equation of blasting vibration from the result of the tests, the decay rate of vibration were confirmed 21.8~61.1% using PLHBM 1 hole, 35.7~79.3% using PLHBM 2 hole for scaled distance within $10{\sim}100m/kg^{1/2}$ on the basis of V-cut PPV. As the scaled distance was increased, the effect of vibration decay was decreased. The effect of vibration decay of cut-hole for intial PLHBM 1~2 hole was significantly high.

• Explosives and Blasting
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2011

In this study, effects that thermal stress and water pressure have on the deformation behaviour of granite specimens recovered in Gagok Mine are estimated. To analyze effects of the thermal stress and water pressure on the deformation behaviour, granite specimens were preheated with cycles of predetermined temperatures ranging $200^{\circ}C$ to $700^{\circ}C$ and 500, 600, $700^{\circ}C$ specimens were pressurized to 7.5 MPa. The deformation behaviour of the specimens had been studied by performing uniaxial compressive tests. Axial and lateral strains of specimens were found to increase with increasing temperature, and above $600^{\circ}C$, the increase of strains were more pronounced. The reduction trends of uniaxial compressive strength and Young's modulus with temperature appeared to follow an exponential decay function. Specimens under water pressure showed the more inelastic deformation characteristics, which means that water pressure has an effect on the widening and extending of micro-cracks existed in preheated specimens.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.19-26
• /
• 2017

The most widely used method for determining the blast effects of explosives is the Trauzl lead block test. This test is used to measure the explosive power (strength) of a substance by determining volume increase, which is produced by the detonation of a test explosive charged in the cavity of a lead block with defined quantity and size. In this paper, Trazul lead block test and AUTODYN numerical analysis were conducted to evaluate the coupling medium effect of blast hole. The effects of coupling materials can be expressed as the expansion of the cavity in a standard lead block through explosion of the explosives. The tests were conducted with emulsion explosives. The coupling mediums used as the filling material around a explosive charge were air, sand, water and gelatine. Results of test and numerical analysis showed that expansion of lead block were much more affected by water&gel than by sand and air. The water and gel showed similar results. As expected, the transmitted pressure and dynamic strain was higher in water and gelatine coupled blast hole than in air and sand.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.53-58
• /
• 2020

This study analyzed the surface roughness of the fine particle spraying process in the plane and the surface roughness by the factors in the fine particle spraying process on the helical surface is analyzed. Finally, the surface fine particle spraying process and the helical curved surface fine particle Analyze the difference in injection conditions of the injection process. Key process variables are particle type, nozzle diameter, and pressure. The remaining conditions are fixed values of. A total of 32 experiments were conducted, each with different process variables. Rectangular and cylindrical specimens were fabricated and a corresponding jig was prepared for use in the experiment. Analyses conducted by using ANOVA enabled comparisons of the effects of each process variable on the experiment.

• Explosives and Blasting
• /
• v.23 no.4
• /
• pp.45-55
• /
• 2005

일반적 의미의 성형폭약이라 함은 폭약 중에 빈공간이 존재하여 표면쪽으로 개방되어 있는 한덩이의 고폭약을 말한다. 이런 이유로 절단 단면의 형상은 주로 V 자형을 이루고 있으며 보통 V자의 뽀족한 부분이 기폭부분이 된다. 성형폭약은 그 생김새를 기준으로 크게 2가지로 나눌 수가 있는데 원뿔형과 선형이 그것이다. 원뿔형 성형폭약은 그 초기 발전단계부터 군용 대장갑용으로 명성을 떨쳤으며 현재에도 많은 연구가 진행되고 있는 상태이다. 이에 비해 선형 성형폭약은 철구조물 해체나 여러 용도의 민간/상업용 절단도구로 많이 쓰이고 있는데 두 번의 세계전쟁을 치루며 엄청난 규모의 물질적 인적 지원을 바탕으로 발전한 원뿔형 성형폭약에 비해서 턱없이 연구실적이 부족한 상태이다. 이 논문에서는 일반적인 선형 성형폭약의 관통력에 대한 연구가 아닌 기능적 측면에 대한 연구결과를 서술하며, 기능적 측면상 중요한 몇 개의 항목에 대한 수량화, 정의 및 연구가 이루어진다. 그 항목으로는 발전거리(run up distance), 이격거리(stand off distance), 기폭위치에 따른 절단모양, 파편 분간 형상 등이 있으며 각 항목에 대한 하류 항목들은 본문에서 다루어진다. 모든 실험은 University of Missouri-Rolla, Rock Mechanics and Explosives Research Center 에서 이루어 졌으며 대부분의 실험은 500grain/ft 선형성형폭약을 사용하여, 기폭 후 철제목표물을 관통한 형상 및 관통 단면을 관찰하는 형식으로 이루어졌다.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.28-34
• /
• 2016

Empirical model, phenomenological model, and CFD model have been used to evaluate the blast effects produced by explosion of explosives, flammable gas and liquid or dust. TNT equivalence method which is one of empirical models has been widely used as it is simple. In this study, new peak overpressure-scaled distance and scaled impulse-scaled distance equations are induced through fitting data from the curves given by TNT equivalence method. If the TNT equivalent mass is calculated, it is possible to estimate the peak overpressure and impulse using the regression equations. Differences of peak overpressure with yield factor which is a component of TNT equivalence method are found to be great in near-by distances from explosion source where the increase in overpressure is very steep, but the differences are getting smaller as the distances increase.