• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.247-252
• /
• 2012

IGBT (insulated gate bipolar transistor) has been widely used around the power industry as it has good switching performance and its excellent conductance. In order to reduce power loss during switch turn-on state, it is essential to reduce its resistance. However, trade off relationship between breakdown voltage and device conductance is the greatest obstacle on the way of improvement. Floating island structure is one of the solutions. Still, under optimized device condition for the best performance, improvement rate is negligible. Therefore, this paper suggests adding trench gate on floating island structure to eliminate JFET (junction field effect transistor) area to reduce resistance and activate floating island effect. Experimental result by 2D simulation using TCAD, shows 20% improvement of turn-on state voltage drop.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2013

In this paper, a biosensor based on a gated lateral bipolar junction transistor (BJT) is proposed. The gated lateral BJT can function as both a metal-oxide-semiconductor field-effect transistor (MOSFET) and a BJT. By using the self-assembled monolayer (SAM) method, the C-reactive protein antibodies were immobilized on the floating gate of the device as the sensing membrane. Through the experiments, the characteristics of the biosensor were analyzed in this study. According to the results, it is indicated that the gated lateral BJT device can be successfully applied as a biosensor. Additionally, we found that the sensitivity of the gated lateral BJT can be varied by adjusting the emitter (source) bias.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.297
• /
• pp.66-72
• /
• 2001

1957년에 사이리스터가 발표된 이래 파워반도체디바이스(이하 ''파워디바이스''라 한다)의 발전과 더불어 이것을 사용하여 전력변환$\cdot$제어와 이를 응용한 파워일렉트로닉스 산업도 현저한 발전을 이루어 왔다. 21세기를 맞이하여 지구의 유한성을 강하게 인식하고 자원과 에너지를 고도이용하는 순환형 사회에로의 전환을 도모하는 기술혁신과 IT(정보기술)를 구사한 기술보급의 움직임이 활발해지고, 파워일렉트로닉스와 그 키파트인 파워디바이스가 수행하여야 할 역할은 점점 더 중요해지고 있다. 이와 같은 배경 하에서 파워디바이스는 인버터제어를 주목적으로 사이리스터, GTO(Gate Turn-off Thyristor), 바이폴라트랜지스터, MOSFET(Metal Oxide Silicon Field Effect Transistor)에서 IGBT(Insulated Gate Bipolar Transistor)에로 진전되고, 그 응용분야도 가전제품에서 OA, 산업, 의료, 전기자동차, 전철, 전력에 이르는 폭넓은 분야로 확대되었다. 현재 파워디바이스를 취급하는 전력의 범위는 수W의 스위칭 전원에서 GW급의 직류송전까지 9단위까지에 이르러 광범위한 전력 제어가 가능하게 되었다. 한편 응용의 중심이 되는 IGBT는, 고속화와 저손실화 및 파괴 내량의 향상을 지향한 개량을 거듭하여 제5세대제품이 나타나기 시작하였다. 또한 IGBT에 구동$\cdot$보호$\cdot$진단 회로 등을 넣어 모듈화한 IPM(Intelligent Power Module)이 그 편리성과 소형화를 특징으로 파워디바이스의 주역의 자리에 정착하였다. 가전$\cdot$산업$\cdot$자동차$\cdot$전철의 각 분야에서는 시장 니즈에 최적 설계된 IPM이 개발되게 되어 보다 더한 시장확대가 기대되고 있다. 또한 종래의 Si(실리콘)에 대신하는 반도체 재료로서 SiC(실리콘 카바이드 : 탄화규소)에 대한 기대가 크고 MOSFET나 SBD 등의 파워디바이스의 조기실용화에의 대처노력도 주목할 만하다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.371-375
• /
• 2000

In this paper a new conductivity modulated power transistor called the Lateral Insulated Gated Bipolar Transistor which included n+ ring and p-channel gate is presented. A new lateral IGBT structure is proposed to suppress latch-up and to improve turn off time by imploying n+ ring and p-channel gate and verified by MEDICI. The simulated I-V characteristics at $V_{G}$=15V show that the latch up occurs at $V_{A}$=18V and 6.9$\times$10$^{-5}$ A/${\mu}{\textrm}{m}$ for the proposed LIGBT while the conventional LIGBT latches at $V_{A}$=1.3V and 1.96${\mu}{\textrm}{m}$10$^{-5A}$${\mu}{\textrm}{m}$. It is shown that turn off characteristic of new LIGBT is 8 times than that of conventional LIGBT. And noble LIGBT is not n+ buffer layer because that It includes p channel gate and n+ ring. Therefore Mask for the buffer layer isn’t needed. The concentration of n+ ring is and the numbers of n+ ring and p channel gate are three for the optimal design.n.n.n.n.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.470-475
• /
• 2002

The effects of the conditions of the collector formation on electrical characteristics of the packaged SiGe hetero-junction bipolar transistors (HBT) were investigated. While the DC characteristics of SiGe HBTs such as IV characteristic, forward current gain, Early voltage, and breakdown voltage were hardly changed after packaging, the AC characteristics such as $f_{\tau}\; and\; f_{max}$ were degraded severely. With the rise of the collector concentration, the break-down voltage decreased but the $f_{\tau}$ increased. Additionally, $\beta$ and $f_{\tau}$ values were kept high in the range of elevated collector current due to the increase of the critical current density for the onset of the Kirk effect. The devices As implanted before the collector deposition showed lower breakdown voltage and higher $f_{\tau}$ than the others, which seems to be originated from the As up-diffusion resulting in the thinner collector.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.135-140
• /
• 2019

In this paper, a frequency split type broadband drive amplifier operating in the L, S and C bands was designed and fabricated. Transistor is difficult to efficiently use when the fractional bandwidth of the drive amplifier is more than 100%, In particular, the characteristics of the driving amplifier are important for operating the power amplifier in which the characteristics of the output power and the efficiency are sensitively changed according to the frequency band. A frequency split methods was applied to maximize the bandwidth of a drive amplifier and to divide the output of the drive amplifier into low band and high band so that the transistor of the power amplifier located at the rear of the drive amplifier can be efficiently used. The designed drive amplifier was fabricated in GaAs HBT technology and 9-layer SiP, and verified by the measurements. The fabricated drive amplifier shows a gain of more than 8 dB and an output power of more than 15 dBm in the operating frequency range.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.269-274
• /
• 2004

Current delivery system, in which the analog current produced by a unique DAC circuit is stored into a current-memory circuit and delivered in a time-divided sequence, shows variation of output current as low as 4% in a current source data-driver IC for AM-OLED driven by a current-programmed method without any fuse repairing after fabrication. This driver IC has 54 outputs and can sink constant current as low as 3 ${\mu}A$ with 6-bit analog levels. Such a low current level without variation can hardly be obtained by an ordinary MOS transistor because the current level is in the sub-threshold region and changes exponentially with threshold voltage variation. Thus we adopted a current mirror circuit composed of bipolar transistors to supply well-controlled current within a nano-ampere range.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1585-1587
• /
• 2004

이중 에피층 구조를 가지는 SOI(Silicon-On-Insulator) LIGBT(Lateral Insulated Gate Bipolar Transistor)의 에피층 두께 변화에 따른 항복전압 특성을 분석하였다. 제안된 소자는 전하보상효과를 얻기 위해 n/p-epi의 이중 에피층 구조를 사용하였으며, 에피층 전체에 걸쳐서 전류가 흐를 수 있도록 하기 위해 trenched anode구조를 채택하였다. 본 논문에서는 n/p-epi층의 농도를 고정시킨 후 각각의 epi층의 두께를 변화시켜가며 simulation을 수행하였을 때 항복전압의 변화 및 표면과 epi층에서의 전계분포변화를 분석하였다.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.601-603
• /
• 2009

This letter presents a high performance 2.4 GHz two-stage power amplifier (PA) operating in the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$ for IEEE 802.11g, wireless local area network application. It is implemented in InGaP/GaAs hetero-junction bipolar transistor technology and has a bias circuit employing a temperature compensation technique for error vector magnitude (EVM) performance. The technique uses a resistor made with a base layer of HBT. The design improves EVM performance in cold temperatures by increasing current. The implemented PA has a dynamic EVM of less than 4%, a gain of over 26 dB, and a current less than 130 mA below the output power of 19 dBm across the temperature range from $-30^{\circ}C$ to $+85^{\circ}C$.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.883-884
• /
• 2004

High-speed IC for time-division multiplexing (TDM) optical transmission systems have been designed and fabricated by using InP heterojunction-bipolar-transistor (HBT) technology. The driver IC was developed for driving external modulators, featuring differential outputs and the operation speed up to 10 Gbps with an output voltage swing of 1.3 Vpp at each output which was the limit of the measurement. Because -3 dB frequency was 20GHz, this circuit will be operated up to 20Gbps. 1.3Vpp differential output was achieved by switching 50 mA into a 50 $\Omega$ load. The power dissipation of the driver IC was 1W using a single supply voltage of -3.5Y. Input md output return loss of the IC were better than 10 dB and 15 dB, respectively, from DC to 20GHz. The chip size of fabricated IC was $1.7{\Box}1.2 mm^{2}$.