• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.113-118
• /
• 2011

This study was aimed to develop blend films by rice by-product (rice-hull and rice-bran) and bio-degradable materials. The rice by-product was firstly prepared from the pulverizing for making fine powder. Bio-degradable materials could be prepared by melting at high temperature. The mixture of the fine powder of rice by-product and melted bio-degradable materials was then blended and cast into films. The obtained films were investigated on their morphology, secondary structures and properties by using SEM, ICP and ASTM, respectively. Mechanical properties and degradability of these films were measured and compared to those of the PE films. Mechanical strength of bio-films was higher than that of PE films, however elongation ratio showed lower percent than that of PE film. In addition, bio-film could be degraded into fragments within 3 months under the field condition of normal upland crop cultivation. Bio-degradable mulching film indicated great potential for agronomic use as a new source of bio-degradable material.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.99-105
• /
• 2012

The main challenges for the development of agricultural bio-degradable mulching film concern the degradation during the lifetime of cultivated crops. A set of rice by-product (rice-hull and rice-bran) based bio-degradable mulching films was developed and tested, following the measurement of standard bio-degradability rate and adaptability in a large scale field experiment. The standard bio-degradability of bio-film passed the KS (Korea standard) regulation. The result of mechanical analysis of bio-degradable mulching film presented a higher mechanical strength and elongation rate compared with polyethylene film. In addition, bio-film could be degraded into fragments within 4 months under the field condition of several upland crops. Bio-degradable mulching film indicated great potential as a new source of agricultural bio-degradable material.

• The monthly packaging world
• /
• s.149
• /
• pp.62-65
• /
• 2005

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.69-74
• /
• 2004

'Mixing' and 'immersion' $CaCl_{2}$ treatment methods were tested for preparation of bio-degradable films using powders of sea mustard (Undaria pinnatifida) (leaf, stem, and sphorophyll), sweet tanlge (Laminaria japonica), and fusiforme (Hizikia fusiforme) by extracting alginate through acid-alkali extraction method. Except fusiforme powder, flexible, free-standing films were produced by both methods using all marine algae powders tested. Except water solubility (WS), surface color, tensile strength (TS), elongation at break (E), and water vapor permeability (WVP) did not show distinct difference between $CaCl_{2}$, treatment methods. Although TS, WVP, and WS of marine algae powder films were lower than those of alginate films, they indicate potential in application as a new source of bio-degradable packaging materials.

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.62-67
• /
• 2015

The surface modification of microfibriled cellulose (MFC) was carried out through the hydrolysis-condensation reaction using (3-aminopropyl)triethoxysilane (APS) and 3-glycidyloxypropyltriethoxysilane (GPS) and then the modified cellulose was compounded with bio-degradable poly(lactic acid) (PLA). Also, pristine MFC was compounded with PLA as a control groups. The confirmation of surface modification for the pristine MFC was characterized by FT-IR and SEM/EDX. The thermal and mechanical properties of the PLA/MFC composites depended on the content of MFC and the type of silane coupling agents. From the thermal, morphological and mechanical behaviors of the PLA/MFC composites, it was found that GPS-MFC was more successful to improve the interface adhesion between PLA matrix and the surface of MFC than that of APS-MFC.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.112-120
• /
• 2023

Herein, we propose a facile water-processible method to develop an eggshell membrane (ESM)-embedded waterborne polyurethane (WPU)-based bio-degradable and bio-compatible coating material that exhibits attractive tactile properties. Virgin ESM is not dispersible in water. Hence, to develop the ESM-based WPU composite, soluble ESM (S-ESM) was first extracted by de-crosslinking the ESM. The extracted S-ESM at different concentrations (0, 0.5, 1.0, 1.5 wt %) was mixed with WPU. Compared to virgin WPU, the viscosity of S-ESM/WPU dispersion and the in-plane coefficient of friction (COF) of the composite film surfaces decreased with an increase in the S-ESM content. In addition, an increase in the S-ESM content improved the tribo-positive characteristics of the film. Different good touch-feeling biomaterials, such as fur, feather, and human skin exhibit tribo-positivity. Thus, the enhanced tribo-positive characteristics of the S-ESM/WPU and the decrease in their COF owing to an increase in the S-ESM content imply the enhancement of its touch-feeling performance. The S-ESM embedded WPU composites have potential applications as coating materials in various fields, including automobile interiors and artificial leather.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.55.2-55.2
• /
• 2012

Intensive theoretical and experimental studies have been carried out at Korean Institute of Science and Technology (KIST) on controlling the bio absorbing rate of the Mg alloys with high mechanical strength through tailoring of electrochemical potential. Key technology for retarding the corrosion of the Mg alloys is to equalize the corrosion potentials of the constituent phases in the alloys, which prevented the formation of Galvanic circuit between the constituent phases resulting in remarkable reduction of corrosion rate. By thermodynamic consideration, the possible phases of a given alloy system were identified and their work functions, which are related to their corrosion potentials, were calculated by the first principle calculation. The designed alloys, of which the constituent phases have similar work function, were fabricated by clean melting and extrusion system. The newly developed Mg alloys named as KISTUI-MG showed much lower corrosion rate as well as higher strength than previously developed Mg alloys. Biocompatibility and feasibility of the Mg alloys as orthopedic implant materials were evaluated by in vitro cell viability test, in vitro degradation test of mechanical strength during bio-corrosion, in vivo implantation and continuous observation of the implant during in vivo absorbing procedures. Moreover, the cells attached on the Mg alloys was observed using cryo-FIB (focused ion beam) system without the distortion of cell morphology and its organ through the removal of drying steps essential for the preparation of normal SEM/TEM samples. Our Mg alloys showed excellent biocompatibility satisfying the regulations required for biomedical application without evident hydrogen evolution when it implanted into the muscle, inter spine disk, as well as condyle bone of rat and well contact interface with bone tissue when it was implanted into rat condyle.

• Composites Research
• /
• v.33 no.4
• /
• pp.213-219
• /
• 2020

Recently, global facing environmental issues have been raised caused by plastic waste. Hence, increasing the demand for interest in environmentally friendly materials. In this row, research on engineering composite materials also replacing the synthetic reinforcement by introducing natural fibers. However, focus on the strength and interfacial adhesion between matrix and reinforcement is very essential in natural fiber composite, which is insufficient in the literature. There are number of approaches for improving the mechanical strength of the composites, one of the common methods is to reinforce additive nanoparticles. The present investigation, bio-additives were synthesized utilizing bio-waste, cheap, bio-degradable sea-weed powder that could replace expensive nanomaterials and reinforced into the CFRP composite through Hand lay-up followed by a vacuum process. Mechanical properties were evaluated and analyzed through microanalysis. The results concluded that synthesized additives are effective for improving mechanical properties such as tensile, flexural, impact, and shear strength. Overall, the results confirmed that the fabricated composites have potential applications in the field of engineering applications.

• Laser Solutions
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2008

This paper describes microscale laser structuring of electrospun(ES) PCL and PET nanofiber meshes. Electrospinning produces non-woven meshes of synthetic or natural materials fibers with diameters ranging from micron down to the nanometer scales that are advantageous for the supporting the growth of the small scale structures. Ultrashort laser found to be effective on the fabrication of engineeredtissue scaffold with minimum heat affect and ultra precision ablation patterns. The affect of energy range for ablation quality was analyzed and ablation characteristics of PCL and PET were compared.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.441-444
• /
• 2006

A lot of water is using in the paper mill for dilution, washing, sealing, and other process operation. As the regulation of water environment has been more tightened than ever before, water management in the paper mill becomes the most important task. Topics on reducing fresh water and increasing recycling water have been studied. Further, an interest in zero-effluent system has been increased. The pH of waste water in paper mill is usually weak acidic or neutral. The waste water in the paper mill includes water insoluble organic materials that are not easy to be dissolved in the water, inorganic materials that never react with water and chemical additives that are used to recycled fiber. This study investigated on the effect of various materials used in paper mill on COD. This data could be used to control the environmental load in paper mill. COD caused by raw materials and NBDCOD (Non Bio Degradable COD) after the activated sludge process are investigated in this study. Results obtained in this study can be used in a simulation program designed to control environmental load in the paper mill.