• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1986

The marathon course on road surfaces varies frequently in alignment horizontally and /or vertically. This fact compelled use to use a calibrated bicycle method for the course measurement, and to be required statistical approaches for data processing. This paper deals with the computation of the Seoul Olympic Marathon course lengths measured on May 18, 1986. The concept of safety factor against short course is analyzed for certification, and statistical methods are presented to compute an appropriate safety factor. The results of computation show that the best (lowest) actual measurement provides about 99.95% confidence that the combined lengths of all intervals will not be found short upon an equally accurate remeasurement.

• Korean Institute of Interior Design Journal
• /
• v.26 no.4
• /
• pp.42-56
• /
• 2017

In Korea, which has three sides of the sea, various waterfront spaces are being developed and developed along with various coastal landscapes. However, there are a lot of cases that do not consider the regional characteristic of the coast or the characteristic of the coastal landscape. In many cases, the street facilities cause the landscape degradation and the use inconvenience because of incongruity with the scenery, aging and lax management. Therefore, it is necessary to reflect the specificity of the coastal landscape in planning and directing the street facilities, harmonizing with the surrounding natural environment, and consideration of sustainability. However, there is no research or planning index for sustainable street facilities considering the coastal characteristics. Therefore, this study suggests plan elements to improve the sustainability of the street facilities on the shore and proposes them as basic plan elements, and suggests what kind of improvements should be made to improve the sustainability of coastal facilities in Korea. Based on the plan elements derived from the plan, we checked the problems and complementary points of coastal street facilities in Korea by analyzing the current status of the street facilities around the Jeju Island beach from a sustainable point of view, and suggested plan indicators that should be supplemented to improve sustainability. We surveyed the street facilities such as walkway blocks, benches, pagoda, drinking fountain, trash cans, bicycle shelters, fences, guide maps, streetlights, and shower rooms in 10 beaches in Jeju Island. This study analyzed the sustainability characteristics of the each factor of these facilities by surveying the reflectivity of the 23 plan indicators from the six aspects derived from the sustainability planning factor as conformity, partial reflection, non - reflection, and nonconformity. The results of the analysis showed that the functional aspect was the highest with 68.3%, the material aspect (53%), the landscape aspect (22.3%), the productive aspect (14.7%) and the morphological aspect (12.2%), and maintenance / management (10.6%). In addition, the facilities with the lowest fitness in each aspect are bicycle shelter in landscape aspect, bicycle storage box and trash can in form aspect, shower room in material aspect, trash can in functional aspect, showroom, guide maps and drinking fountain in product aspect, showroom In maintenance aspect. In order to improve the sustainability of coastal facilities in the future, it is necessary to complement the administrative and landscape aspects. In coastal facilities, it is necessary to consider the sustainability planning index, especially for showers, taking into account the specificity of beaches. Consideration should be given to various aspects of sustainability for bike shelters and trash facilities. Through this study, we have proposed the plan elements to systematize, supplement, and improve the planning index for sustainability improvement in coastal facilities planning.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.127-133
• /
• 2015

PURPOSES: The purpose of this study is to develop a methodology to prioritize sidewalk construction on rural national highways. METHODS : In order to determine an appropriate prioritization for sidewalk construction, we developed a specific methodology. The proposed methodology includes three main steps: 1) Analytic Hierarchy Process (AHP) methods, 2) Subjective evaluation of relevant road agencies for the candidate sidewalks along rural national highways, and 3) Field study conduction. Each step has four phases. The primary feature of this methodology is the addition of expert consultation and survey data, as well as a field study. In addition, the method could guarantee flexibility in selection for evaluation criteria. As a result, the proposed methodology could be used as a general procedure for application to other roadway classifications when considering sidewalk construction. RESULTS: In order to demonstrate the reasonableness of the proposed methodology, a case study was performed for exactly 100 candidate sites for sidewalk construction on rural national highways. All required evaluation scores were properly produced for each candidate site. By doing so, decision-makers can determine the priority for sidewalk construction at these sites by reviewing quantitatively and qualitatively considered data. CONCLUSIONS: The results of the case study can be applied to a long-term fundamental plan for sidewalk construction on rural national highways. Furthermore, this methodology could be employed to prioritize a small-scale SOC project(e. g. bicycle or pedestrian roads).

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.91-100
• /
• 2004

This study was Performed to evaluate applicability of color flexible pavement concrete (CFPC) for motorway pavement. Color flexible pavement has been applied to non-motorway pavements, such as pedestrian and bicycle road. Two polymers were used to modify the binder and to strengthen the stiffness of pavement mixture. Waste paper was used to prevent the asphalt of gap-grade mixture from draining. Marshall properties, indirect tensile strength(ITS), tensile strength ratio(TSR) before and after freezing-and-thawing treatment and artificial aging, permanent deformation and fatigue life were measured. Color bituminous concrete mixtures used this study had nearly the same quality in mechanical properties when compared with conventional asphalt concrete mixtures manufactured with AP-3 and all mixtures satisfied with domestic specification for motorway pavement. Therefore, it is proved that the color bituminous concrete used this study can be applied for motorway pavement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.79-90
• /
• 2019

This study aims to develop time headway distribution models of bicycle traffic flow in a uninterrupted bikeway. The sample data were collected and classified into two groups of traffic volume levels. The lower level traffic volume is defined to be under 8 bicycles per minute, and the higher one is greater or equal to 8 bicycles per minute. The data aggregation interval size was set to be 0.5-second. Four distribution models including normal distribution, negative exponential distribution, shifted negative exponential distribution, and Pearson III distribution were tested, and Chi-square test results shows that the negative exponential distribution and the shifted negative exponential distribution are well fitted to the sample data. Another test results with different sample data also shows the same conclusion.

• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.792-801
• /
• 2005

This paper discusses a dc motor equipped electric power steering (EPS) system and demonstrates its advantages over a typical hydraulic power steering (HPS) system. The tire-road interaction torque at the steering tires is calculated using the 2 d.o.f. bicycle model, in other words by using a single-track model, which was verified with the J-turn test of a real vehicle. Because the detail parameters of a steering system are not easily acquired, a simple system is modeled here. In previous EPS systems, the assisting torque for the measured driving torque is developed as a boost curve similar to that of the HPS system. To improve steering stiffness and return-ability of the steering system, a third-order polynomial as a torque map is introduced and modified within the preferred driving torques researched by Bertollini. Using the torque map modification sufficiently improves the EPS system.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.107-113
• /
• 2017

This paper deals with the traffic factors related to the collisions of circular intersections. The purpose of this study is to develop traffic accident models by type of collision based on land use. In pursuing the above, the traffic accident data from 2010 to 2014 were collected from the "Traffic Accident Analysis System (TAAS)" data set of the Road Traffic Authority. A multiple regression model was utilized in this study to develop the traffic accident models by type of collision. 17 explanatory variables such as geometry and traffic volume factors were used. The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents by type of collision is rejected. Second, 10 accident models by type of collision based on land use are developed, which are all statistically significant. Finally, the ADT, inscribed circle diameter, bicycle lane, area of central island, number of speed hump, circulatory roadway width, splitter island, area of circulatory roadway, mean number of entry lane and mean width of entry lane are analyzed to see how they affect accident by type of accident based on land use.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.5-17
• /
• 2015

Purpose: The goal of this research is to identify the planning techniques of Smart Green City with Ubiquitous method and carbon-neutral city planning techniques and to induce the main planning techniques through the analysis of relative importance and practical adaptation. Method: First of all, eighteen planning techniques were derived and categorized into three organization systems and six sectors through literature review and FGI analysis considering the applicability of Ubiquitous service for carbon-neutral city planning techniques. Secondly, based on expert surveys and AHP analysis, the importance of Smart Green City planning techniques was evaluated. Thirdly, using case study, six cases related to Smart Green City were analyzed for the current status of application of planning techniques. Lastly, considering the importance of planning techniques and practical aspects, the characteristics of Smart Green City and its implication were estimated. Result: Energy, Resource and Waste and Transportation sector were identified as important sectors for Smart Green City. In addition, 'Construction of Smart Grid', 'System for Utilization of New & Renewable Energy', 'Smart Resource Circulation Management System', 'Establishment of Public Transportation Information System basis', 'Construction of Pedestrian / Bicycle oriented Road Environment' are essential planning techniques to create Smart Green City.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.99-105
• /
• 2017

As cities develops, road systems become more and more complicated. These days people depends on navigation systems when walking as well as driving cars. General navigation systems are either installed in cars or exists as smart phone applications. Therefore, it is very difficult to use them while walking or riding bicycles. Moreover, disabled person cannot use them to find his destinations. In this paper, we propose a bracelet navigation system for walkers and disabled people, and describe the design and implementation of such a device. This navigation will help not only walkers and people riding bicycle but also disabled people to actively participate their social activities.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.408-415
• /
• 2016

The vehicle attitude and sideslip is critical information to control the vehicle to prevent from unintended motion. Many of estimation strategy use bicycle model or IMU integration, but both of them have limits on application. The main purpose of this paper is development of vehicle orientation estimator which is robust to various vehicle state and road shape. The suggested estimator use 3-axis magnetometer, yaw rate sensor and lateral acceleration sensor to estimate three Euler angles of vehicle. The estimator is composed of two individual observers: First, comparing the known magnetic field and gravity with measured value, the TRIAD algorithm calculates optimal rotational matrix when vehicle is in static or quasi-static condition. Next, merging 3-axis magnetometer with inertial sensors, the extended Kalman filter is used to estimate vehicle orientation under dynamic condition. A validation through simulation tools, Carsim and Simulink, is performed and the results show the feasibility of the suggested estimation method.