• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.

• Computers and Concrete
• /
• 제31권2호
• /
• pp.163-171
• /
• 2023

Face gear transmission is widely used in aerospace shunt-confluence transmission system. Tooth wear is one of the main factors affecting its bearing transmission performance. Furthermore, the installation errors of face gear are inevitable. In order to study the wear mechanism of face gear tooth surface with installation errors, based on tooth contact analysis numerical method and Archard wear theory, the UMESHMOTION subroutine in ABAQUS is developed.Combining with Arbitrary Lagrangian-Eulerian adaptive mesh technology, the finite element mesh wear model of abraded face gear pair is established.The preprocessing conditions are set to generate the inp files.Then,the inp files for each corner are imported and batch processed in ABAQUS.The loading tooth contact problem at each rotation angle is solved and the load distribution coefficient among gear tooth, tooth root bending stress, tooth surface contact stress and loaded transmission error are obtained. Results show that the tooth root wear is the most serious and the wear at the pitch cone is close to 0.The wear law of tooth surface along tooth width direction is convex parabola and the wear law along tooth height direction is concave parabola.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.435-446
• /
• 2024

The use of cold-formed steel members is increasing day by day, especially in regions where earthquake effects are intensively experienced. Among cold-formed steel members (CFS), "channel" members are used more than other crosssectional members, especially in buildings or industrial structures. In recent years, several studies have been carried out on the axial load and flexural performance of these members under monotonic loading. In this study, CFS beam-column members were cyclically and monotonically loaded under combined axial load and biaxial bending moments, and their buckling behavior, load bearing capacity, stiffness, ductility, and energy absorption capacity were determined. For this purpose, monotonic and cyclic loading experiments were carried out on 30 CFS channel members at 15 different eccentricities. Then, material properties were determined by axial monotonic tensile and very low cycle fatigue tests for use in numerical studies. From the experimental results, the buckling modes, bearing capacities, ductility, stiffness, and energy absorption capacities of the members were obtained. The characteristics of the members were compared according to the stress state of the lips. According to the data obtained from the displacement transducer placed on the lips and on the back of the web, information about the buckling mode and curvature of the members was obtained. Finally, monotonic, and cyclic loading results were compared to determine the differences in the buckling behavior of the members.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.12-18
• /
• 2012

This application study of a swash-plate type axial piston pump was concerned about the lubrication characteristics between cylinder barrel and valve plate which are the main rotating body and its opposite sliding part respectively. A computer simulation was implemented to assess bearing and sealing functions of the fluid film between cylinder barrel and valve plate. A numerical algorithm was developed to facilitate simultaneous calculations of dynamic cylinder pressure, 3 degree-of-freedom barrel motions considering inertia effect, and fluid film pressure assuming full fluid film lubrication regime. Central clearance, tilt angle, and azimuth angle of the rotating body were calculated for each time step. Surface waviness was found to be an influential factor due to the small fluid film thickness which can appear in flat land bearings. Five surface lays which can form on the lubrication surface in accordance with machining process were defined and analyzed using the simulation tool. Oil leakage flow and frictional torque in the fluid film between cylinder barrel and valve plate were also calculated to discuss in the viewpoint of energy loss. The simulation results showed that in actual sliding conditions proper surface non-flatness can make a positive effect on the energy efficiency and reliability of the thrust bearing.

• 한국지반환경공학회 논문집
• /
• 제2권4호
• /
• pp.63-72
• /
• 2001

연약지반에 구조물을 시공하는 경우가 빈번해짐에 따라 연약지반 개량의 필요성이 증대하고 있다. Granular pile 공법은 연약한 점성토 지반이나 느슨한 사질토 지반의 개량에 사용되는 연약지반처리공법이다. 국내에서는 모래를 이용한 SCP공법은 종종 사용해 왔지만 쇄석을 이용한 Granular pile은 외국에 비해 그 사용실적이 미비한 실정이다. 그러나 모래자원의 고갈에 따른 환경적, 경제적인 문제때문에 모래 대신 이용할 수 있는 대체재의 필요성이 절실해지고 있다. 본 연구에서는 Granular pile 공법에 의해 개량된 연약한 점성토 지반의 거동 특성을 파악하기 위하여 모형토조를 이용한 하중재하 및 압밀시험을 실시하였다. 또한, Pile 재료로서 모래뿐만 아니라 쇄석을 이용한 실내모형 시험으로 각각의 재료에 따른 지지력 특성 및 침하 특성, 배수 특성 등의 공학적 특성을 비교 평가하여 모래의 대체재로서 쇄석의 활용가능성을 검토하였다. 시험결과, 쇄석은 모래 재료에 비해 지지력증대와 침하저감효과가 크고, 유사한 간극수압특성을 보여 모래의 대체재료로서 쇄석의 활용이 가능하다고 판단된다.

• 한국음향학회지
• /
• 제8권1호
• /
• pp.5-12
• /
• 1989

RMS, Kurtosis, Crest factor, Probability of exceedance와 Probability density function 등의 통계적 파라미터를 선정하여 베어링의 사용조건과 결함진전에 따른 변화특성을 조사하였다. 이를 위해 4볼 시험기에서 하중, 회전수 및 시간을 변화시키면서 실험하여 진동신호를 수집하고, 이를 A/D변환시킨 후 디지털 필터링하여 주파수 대역별 통계적 파라미터 값을 계산하였다. 실험결과, 하중이나 회전수와 같은 운전조건이 변화하는 경우 RMS의 값은 운전조건 변화에 따라 변하지만 Kurtosis 등의 통계적 파라미터들은 운전조건과 무관하게 steady한 결과를 나타내었다. 또한 통계적 파라미터와 시간과의 상관관계에 대한 실험으로부터 통계적 파라미터들을 결함의 진전 상태를 나타내는 파라미터로 사용할 수 있음을 확인하였으며, 따라서 파손방지를 위한 예측지표로서 이들 통계적 파라미터를 이용할 수 있을것으로 판단되었다.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.42-48
• /
• 2015

To improve the core technology of the micro gas turbine, the performance test facility was developed. This paper is focusing on the explanation of the characteristics of micro gas turbine and its assist devices. Major part of micro gas turbine were radial type of compressor, annular type of combustor, radial type of turbine, thrust foil bearing, radial foil bearing and generator. The assist devices were consist of exhaust duct, inverter, data acquisition system, load bank and test cell. Before building up the test facility, the component test was previously conducted to confirm the component performance. After the test facility was prepared, the motoring test was conducted to investigate the rotor dynamic characteristics of the micro gas turbine. Also, the part load performance test was performed. With a developed micro gas turbine test facility, the improved core technology about the micro gas turbine can be suggested to the related industries.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1203-1211
• /
• 2010

당항만 해역의 지질 및 퇴적물 특성을 조사하기 위하여 지표지질조사, SBP 탐사, 표층 퇴적물 분석 등을 수행하였다. 당항만 지역은 사면이 육지로 둘러싸인 폐쇄성 연안으로 표층은 주로 점토나 모래질 점토로 피복되어 있으며, 표층 퇴적물의 퇴적상은 상부의 Mm 퇴적상과 하부의 Mms 퇴적상로 구분된다. SBP 탐사 자료에 의하면 당항만의 퇴적층 내에는 가스 함유층이 폭넓게 분포하고 있는 것으로 판단되며, 이로 인해 음향 기반암의 확인이 어렵고 도처에서 gas seep이 나타나는 것으로 보인다. 퇴적층내에 함유되어 있는 가스는 퇴적물의 높은 유기물 함량과 밀접한 연관이 있는 것으로 보이며, 두꺼운 점토층이 가스의 방출을 억제하고 있는 것으로 보인다.

• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.820-826
• /
• 2013

본 논문에서는 스마트 스킨 기술을 활용한 소형경량 및 광대역 특성을 갖는 항공기용 안테나 내장 스킨 구조(CLAS: Conformal Load bearing Antenna Structure)를 설계하였다. 제안된 CLAS 안테나는 전기적 성능을 만족하기 위해 전도성 매쉬, 외부표피, 복사소자, 내부심재 및 하우징 등으로 구성하였다. 특히, 복사소자의 경우 복합자성유전체와 PCB에 에칭된 방사체로 구성되어 있으며 방사체는 복합자성유전체에 삽입되어 슬롯형 폴디드 대수주기 구조(Folded Log-Periodic)를 갖는다. 제안된 CLAS 안테나는 복합자성유전체에 의해 공진주파수가 낮아지고 임피던스 매칭특성이 향상되었으며 측정 결과, 안테나의 소형경량 및 광대역 특성을 확인하였다.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.67-76
• /
• 1989

본 논문에서는 표면거칠기 측정에 있어 70% 이상을 차지하는 촉침식을 이용하여 필터의 cut-off치와 위상특성에 따른 표면거칠기 값의 변화와 필터의 선택에 따른 장점 및 문제점에 대하여 알아보고자 한다.