DOI QR코드

DOI QR Code

Analysis on load-bearing contact characteristics of face gear tooth surface wear with installation errors

  • Fan Zhang (College of Mechanical Engineering, Xi'an University of Science and Technology) ;
  • Xian-long Peng (College of Mechanical Engineering, Xi'an University of Science and Technology)
  • Received : 2021.10.17
  • Accepted : 2023.01.06
  • Published : 2023.02.25

Abstract

Face gear transmission is widely used in aerospace shunt-confluence transmission system. Tooth wear is one of the main factors affecting its bearing transmission performance. Furthermore, the installation errors of face gear are inevitable. In order to study the wear mechanism of face gear tooth surface with installation errors, based on tooth contact analysis numerical method and Archard wear theory, the UMESHMOTION subroutine in ABAQUS is developed.Combining with Arbitrary Lagrangian-Eulerian adaptive mesh technology, the finite element mesh wear model of abraded face gear pair is established.The preprocessing conditions are set to generate the inp files.Then,the inp files for each corner are imported and batch processed in ABAQUS.The loading tooth contact problem at each rotation angle is solved and the load distribution coefficient among gear tooth, tooth root bending stress, tooth surface contact stress and loaded transmission error are obtained. Results show that the tooth root wear is the most serious and the wear at the pitch cone is close to 0.The wear law of tooth surface along tooth width direction is convex parabola and the wear law along tooth height direction is concave parabola.

Keywords

References

  1. Altunisik, A.C., Kalkan, E. and Basaga, H.B. (2018), "Structural response relationship between scaled and prototype concrete load bearing systems using similarity requirements", Comput. Concrete, 21(4), 385-397. https://doi.org/10.12989/cac.2018.21.4.385.
  2. Bai, X., Shi, H., Zhang, K., Zhang, X. and Wu, Y. (2022), "Effect of the fit clearance between ceramic outer ring and steel pedestal on the sound radiation of full ceramic ball bearing system", J. Sound Vib., 529, 116967. https://doi.org/10.1016/j.jsv.2022.116967.
  3. Bose, K.K. and Penchaliah, R. (2019), "3-D FEM wear prediction of brass sliding against bearing steel using constant contact pressure approximation technique", Tribol. Online, 14(4), 194-207. https://doi.org/10.2474/trol.14.194.
  4. Chen, H. and Li, S. (2022), "Multi-sensor fusion by CWTPARAFAC-IPSO-SVM for intelligent mechanical fault diagnosis", Sensors, 22(10), 3647. https://doi.org/10.3390/s22103647.
  5. Chen, H., Xiong, Y., Li, S., Song, Z., Hu, Z. and Liu, F. (2022), "Multi-sensor data driven with PARAFAC-IPSO-PNN for identification of mechanical nonstationary multi-fault mode", Mach., 10(2), 155. https://doi.org/10.3390/machines10020155.
  6. Dzolev, I., Cvetkovska, M., Ladinovic, D. and Radonjanin, V. (2018), "Numerical analysis on the behaviour of reinforced concrete frame structures in fire", Comput. Concrete, 21(6), 637-647. https://doi.org/10.12989/cac.2018.21.6.637.
  7. Ebadi-Jamkhaneh, M., Homaioon-Ebrahimi, A. and Kontoni, D.P.N. (2021), "Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps", Comput. Concrete, 28(2), 137-147. https://doi.org/10.12989/cac.2021.28.2.137.
  8. Ferrotto, M.F., Cavaleri, L. and Di Trapani, F. (2018), "FE modeling of partially steel-jacketed (PSJ) RC columns using CDP model", Comput. Concrete. 22(2), 143-152. https://doi.org/10.12989/cac.2018.22.2.143.
  9. Flodin, A. (2000), "Wear investigation of spur gear teeth", Tribotest, 7(1), 45-60. https://doi.org/10.1002/tt.3020070106.
  10. Flodin, A. and Andersson, S. (1999), "Wear simulation of spur gears", Tribotest, 5(3), 225-249. https://doi.org/10.1002/tt.3020050303.
  11. Flodin, A. and Andersson, S. (2000), "Simulation of mild wear in helical gears", Wear, 241(2), 123-128. https://doi.org/10.1016/S0043-1648(00)00384-7.
  12. Flodin, A. and Andersson, S. (2001), "A simplified model for wear prediction in helical gears", Wear, 249(3), 285-292. https://doi.org/10.1016/S0043-1648(01)00556-7.
  13. Gurunandan, M. and Raghavendra, T. (2021), "Novel NSM configuration for RC column strengthening-A numerical study", Comput. Concrete, 27(5), 437-445. https://doi.org/10.12989/cac.2021.27.5.437.
  14. He, J.C., Zhu, S.P., Luo, C., Niu, X. and Wang, Q. (2022), "Size effect in fatigue modelling of defective materials: Application of the calibrated weakest-link theory", Int. J. Fatigue, 165, 107213. https://doi.org/10.1016/j.ijfatigue.2022.107213.
  15. Hidayat, B.A., Hu, H.T., Hsiao, F.P., Han, A.L., Sosa, L., Chan, L.Y. and Haryanto, Y. (2021), "Seismic behavior and failure modes of non-ductile three-story reinforced concrete structure: A numerical investigation", Comput. Concrete, 27(5), 457-472. https://doi.org/10.12989/cac.2021.27.5.457.
  16. Hou, X.Y., Fang, Z.D., Deng, X.Z., Cai, X.W. and Ning, C.F. (2015), "Contact analysis of spiral bevel gears based on finite element model", J. Harbin Eng. Univ., 36(6), 826-830.
  17. Huang, N., Chen, Q., Cai, G., Xu, D., Zhang, L. and Zhao, W. (2021), "Fault diagnosis of bearing in wind turbine gearbox under actual operating conditions driven by limited data with noise labels", IEEE Trans. Instrum. Meas., 70, 1-10. https://doi.org/10.1109/TIM.2020.3025396.
  18. Janakiraman, V., Li, S. and Kahraman, A. (2014), "An investigation of the impacts of contact parameters on wear coefficient", J. Tribol., 136(3), 031602. https://doi.org/10.1115/1.4027440.
  19. Khalilpourazary, S. and Meshkat, S.S. (2014), "Investigation of the effects of alumina nanoparticles on spur gear surface roughness and hob tool wear in hobbing process", Int. J. Adv. Manuf. Technol., 71(9), 1599-1610. https://doi.org/10.1007/s00170-013-5591-8.
  20. Li, X.K., Zhu, S.P., Liao, D., Correia, J.A.F.O., Berto, F. and Wang, Q. (2022), "Probabilistic fatigue modelling of metallic materials under notch and size effect using the weakest link theory", Int. J. Fatigue, 159, 106788. https://doi.org/10.1016/j.ijfatigue.2022.106788.
  21. Liang, L., Xu, M., Chen, Y., Zhang, T., Tong, W., Liu, H., Wang, H. and Li, H. (2021), "Effect of welding thermal treatment on the microstructure and mechanical properties of nickel-based superalloy fabricated by selective laser melting", Mater. Sci. Eng.: A, 819, 141507. https://doi.org/10.1016/j.msea.2021.141507.
  22. Litvin, F.L. and Fuentes, A. (2004), Gear Geometry and Applied Theory, Cambridge University Press, New York, NY, USA.
  23. Litvin, F.L., Lu, J., Townsend, D.P. and Howkins, M. (1999), "Computerized simulation of meshing of conventional helical involute gears and modification of geometry", Mech. Mach. Theory, 34(1), 123-147. https://doi.org/10.1016/S0094-114X(98)00013-5.
  24. Liu, C., Zhao, Y., Wang, Y., Zhang, T. and Jia, H. (2021), "Hybrid dynamic modeling and analysis of high-speed thin-rimmed gears", J. Mech. Des., 143(12), https://doi.org/10.1115/1.4051137.
  25. Pan, D., Zhao, Y., Li, N. and Wang, X.G. (2012), "The wear life prediction method of gear system", J. Harbin Inst. Technol., 9, 29-33.
  26. Park, D. and Kahraman, A. (2009), "A surface wear model for hypoid gear pairs", Wear, 267(9), 1595-1604. https://doi.org/10.1016/j.wear.2009.06.017.
  27. Park, D., Kolivand, M. and Kahraman, A. (2012), "Prediction of surface wear of hypoid gears using a semi-analytical contact model", Mech. Mach. Theory, 52, 180-194. https://doi.org/10.1016/j.mechmachtheory.2012.01.019.
  28. Park, D., Kolivand, M. and Kahraman, A. (2014), "An approximate method to predict surface wear of hypoid gears using surface interpolation", Mech. Mach. Theory, 71, 64-78. https://doi.org/10.1016/j.mechmachtheory.2013.09.002.
  29. Peng, X., Xu, Q., Hou, X. and Kou, F. (2020), "Finite element analysis of gear bearing transmission performance influenced by misalignment", J. Harbin Eng. Univ., 41(12), 1861-1867.
  30. Tang, J. and Liu, Y. (2012), "Loaded meshing simulation of facegear drive with spur involute pinion based on finite element analysis", Chin. J. Mech. Eng., 48(5), 124-131. https://doi.org/10.3901/JME.2012.05.124
  31. Wang, H.L., Deng, X.Z., Xu, K., Yang, J.J. and Su, J.X. (2014), "Load tooth contact analysis (LTCA) of helical gears using topographic modification and installation errors", J. Northwestern Polytech. Univ., 32(5), 781-786.
  32. Wang, Q., Jiang, J., Chen, H., Tian, J., Su, Y. and Guo, J. (2022), "Design and analysis for hypoid gears with ease-off flank modification", Appl. Sci., 12(2). https://doi.org/10.3390/app12020822.
  33. Wang, X.L., Lu, J.W. and Yang, S.Q. (2019), "Sensitivity analysis and optimization design of hypoid gears' contact pattern to misalignments", J. Zhejiang Univ. Sci. A, 20(6), 411-430. https://doi.org/10.1631/jzus.A1900021.
  34. Xiang, L., Zongde, F. and Yabin, G. (2019), "A hybrid analytical method for calculating contact stress of helical gear with assembly error", J. Harbin Eng. Univ., 40(10), 1767-1775.
  35. Xu, S., Huang, W., Wang, H., Zheng, W., Wang, J., Chai, Y. and Ma, M. (2023), "A simultaneous diagnosis method for power switch and current sensor faults in grid-connected three-level NPC inverters", IEEE Trans. Power Electr., 38(1), 1104-1118. https://doi.org/10.1109/TPEL.2022.3200721.
  36. Xuezhong, F.U., Zongde, F. and Xiang, L. (2018), "Assembly errors tolerance and sensitivity of offset face gears", J. Harbin Eng. Univ., 39(7), 1227-1232.
  37. Yan, A., Chen, Y., Xu, Z., Chen, Z., Cui, J., Huang, Z., Girard, P. and Wen, X. (2020), "Design of double-upset recoverable and transient-pulse filterable latches for low-power and low-orbit aerospace applications", IEEE Trans. Aerosp. Electron. Syst., 56(5), 3931-3940. https://doi.org/10.1109/TAES.2020.2982341.
  38. Zhang, J.G., Liu, S.J. and Fang, T. (2017), "On the prediction of friction coefficient and wear in spiral bevel gears with mixed TEHL", Tribol. Int., 115, 535-545. https://doi.org/10.1016/j.triboint.2017.06.035.
  39. Zhang, P., Liu, J., Gao, Y., Liu, Z. and Mai, Q. (2023a), "Effect of heat treatment process on the micro machinability of 7075 aluminum alloy", Vacuum, 207, 111574. https://doi.org/10.1016/j.vacuum.2022.111574.
  40. Zhang, P., Liu, Z., Liu, J., Yu, J., Mai, Q. and Yue, X. (2023b), "Effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy", Vacuum, 208, 111692. https://doi.org/10.1016/j.vacuum.2022.111692.
  41. Zhang, P., Liu, Z., Yue, X., Wang, P. and Zhai, Y. (2022), "Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy", Vacuum, 206, 111532. https://doi.org/10.1016/j.vacuum.2022.111532.
  42. Zhou, C.J., Wang, H.B., Lei, H.Y. and Liu, Z. (2018), "Calculating and measuring methods for gear wear and its suppression techniques", J. Beijing Univ. Technol., 44(7), 987-1000.