• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.51-63
• /
• 2013

Recently with base apply MANET with the application for the service discovery and delivery which are various techniques are being proposed the result of such MANET base research techniques from actual inside. This dissertation proposes T-Chord(Trustworthy-based Chord) Ring system for MANET to guarantees from such requirements. T-Chord Ring system in order to manage Efficiently the services which the mobile nodes provide is the service discovery system which uses P2P overlay network Technique in mobile environment. The system which is proposed MANET communications in order to accomplish a service discovery operation with physical network class and logical network class will be able to minimize problems from about MANET service discoveries, and uses the dispersive hash table technique for a service discovery and effectiveness of service discovery improves and will be able to guarantee the expandability of network size. The mobile nodes(mobile device) have a mobility from MANET and operate with service request node, service provide node and service transmit node. The mobile nodes will be able to elect cluster header using Trustworthy that was evaluated service request, provision and delivery in each other. The system which is proposed a service discovery and a delivery efficiently will compose the cluster head which will grow of P2P overlay networks and will be able to accomplish. The system which proposes from dissertation is composed of Trustworthy evaluations of MANET mobile nodes, service information collection which is dispersed and P2P overlay networks that composed of Chord algorithm modules which provide O(Log N) efficiencies. The system comparison evaluation analyzes an efficiency from the expandability side of effectiveness and the network of service discovery technique and the service discovery message over head, service discovery and delivery of former times and service discovery and delivery is excellent gives proof from MANET.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.76-85
• /
• 2012

Geochemical and ecological properties of remediated soil and gas exhausted from a low-temperature thermal desorption (LTTD) process were analyzed to assess the environmental impact of LTTD treatment. Soil characteristics were examined with regard to the chemical (EC, CEC, and organic matter) and the ecological (dehydrogenase activity, germination rate of Brassica juncea, and growth of Eisenia andrei) properties. The exhaust gases were analyzed based on the Air Quality Act in Korea as well as volatile organic compounds (VOCs) and mixed odor. Level of organic Organic matter of the soil treated by LTTD process was slightly decreased compared to that of the original soil because the heating temperature ($200^{\circ}C$) and retention time (less than 15 minutes) were neither high nor long enough for the oxidation of organic matter. The LTTD process results in reducing TPH of the contaminated soil from $5,133{\pm}508$ mg/kg to $272{\pm}107$ mg/kg while preserving soil properties. Analysis results of the exhaust gases from the LTTD process satisfied discharge standard of Air Quality Law in Korea. Concentration of VOCs including acetaldehyde, propionaldehyde, butyraldehyde and valeraldehyde in circulation gas volatilized from contaminated soil were effectively reduced in the regenerative thermal oxidizer and all satisfied the legal standards. Showing ecologically improved properties of contaminated soil after LTTD process and environmentally tolerable impact of the exhaust gas, LTTD treatment of TPH-contaminated soil is an environmentally acceptable technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3582-3588
• /
• 2013

Expressed sequence tag (EST) library was constructed from A. tamarense. Base sequences of EST clones were analyzed and saxitoxin biosynthesis-related genes were cloned. Sequences of 827 clones were analyzed and 564 EST were functionally clustered using Blast searches against GenBank. Main genes in the EST had functions on cellular organization, cell metabolism, energy, cell cycle and DNA processing, cellular transport and transport, cell rescue, defense, death and aging, and transcription. Moreover, expression of S-adenosylmethionine synthetase and H2A histone family genes were increased in the toxic A. tamarense. These results show that two genes could be a good biomarkers for the detection of saxitoxin biosynthesis in the A. tamarense.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.6
• /
• pp.411-418
• /
• 2019

Light-triggered thyristors (LTTs) are essential components in high-power applications, such as HVDC transmission and several pulsed-power applications. Generally, LTT fabrication includes a deep diffusion of aluminum as a p-type dopant to form a uniform p-base region, which needs careful concern for contamination and additional facilities in silicon semiconductor manufacturing factories. We fabricated 4-inch 5,000 V LTTs with boron implantation and diffusion process as a p-type dopant. The LTT contains a main cathode region, edge termination designed with a variation of lateral doping, breakover diode, integrated resistor, photosensitive area, and dV/dt protection region. The doping concentration of each region was adjusted with different doses of boron ion implantation. The fabricated LTTs showed good light triggering characteristics for a light pulse of 905 nm and a blocking voltage (V_DRM) of 6,500 V. They drove an average on-state current (I_TAVM) of 2,270 A, peak nonrepetitive surge current (I_TSM) of 61 kA, critical rate of rise of on-state current (di/dt) of 1,010 A/㎲, and limiting load integral (I²T) of 17 MA²s without damage to the device.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.617-624
• /
• 2009

In this paper, an electromagnetic analysis methodology using reaction theorem based on reciprocity theorem is presented for the aspheric ogival radome applied to a missile and/or airborne radar. The presented analysis methodology is verified using actual measured data. The type of antenna assumed to develope the methodology is a waveguide slot array antenna, and has the structure of 2 axes monopulse of "X" type. The shape of radome is assumed as Von Karman and the ratio of length to base diameter(L/D) is assumed to be 2:1. The electrical characteristics of the radome are measured using radome measurement system and the results are compared to the values estimated using the presented analysis methodology. It is found that the comparison shows good agreement. It is expected that the presented methodology can be applied for the development of missile and airborne radome.

• Journal of the military operations research society of Korea
• /
• v.3 no.2
• /
• pp.49-77
• /
• 1977

Weapon systems are curcial instruments for the security of a nation and critical elements for the victory in a war. Since modern weapon systems tend to be capital-intensive with high precision and quality, they become more and more complex and diversified; their acquisition costs become huge; and their technological obsolescence becomes accelerated. Therefore, the systematic management of weapon acquisition process would be one of the most important defense tasks at the national level. To analyze such problems and find solutions, this paper has studied various aspects related to the efficient management of weapon system acquisition. After brief summarization of the general characteristics of weapon systems, their effectiveness, and developmental trend, the paper discusses the defense management policies and techniques for the weapon systems. Specifically, four alternative acquisition methods such as indigenous R & D, foreign purchase, co-production and joint-production are discussed and analyzed by systems approach. The systems analysis procedure to evaluate and select weapon acquisition method is as follows; 1) to analyze the merits and demerits of the alternative methods, 2) to screen unrealistic alternatives through the consideration of significant factors such as political, economic, military, technological, and social constraints, 3) to evaluate and select an optimal one among the remaining acquisition methods after the cost-effectivenss analysis. For the base of cost-effectivess analysis, cost analysis model as well as effectiveness analysis model of each acquisition method are developed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.70-76
• /
• 2016

Tensile and compressive strength tests were conducted to investigate the mechanical characteristics of aluminized paraffin wax fuel for hybrid gas generator applications. Mixtures of 0 wt%, 10 wt% and 30 wt% nano aluminum paraffin coupons as well as 5 wt%, 10 wt% and 15 wt% micro aluminum paraffin coupons were used. The average particle size of 100nm and of $8{\mu}m$ mixed each with microcrystalline paraffin wax(Sasol 0907) were chosen for the base specimens where the tensile strength test followed the ASTM-D638 specimen standard while the compressive strength test followed the ASTM D575-91. It was found that nano based specimens increased both the tensile and compressive strength enhancing the mechanical behavior of paraffin wax whereas the micro based specimens gave still less influential effect.

• The Journal of Society for e-Business Studies
• /
• v.10 no.1
• /
• pp.41-60
• /
• 2005

IDEF(Integrated Definition) method, a standard methodology of CALS process modelling, was applied to the weapon system R&D process to provide information modelling by analysing about goal, input, output and constraints in the R&D process. The information to be managed in R&D institutes was identified by using SmartER which is the automation program of IDEF1/1X and obtained information modelling for TO-BE model. The work process of weapon system R&D consists of the concept study phase, the exploration development phase, the system development phase, the prototype manufacturing phase, and the report writing of R&D results phase. The information modelling of weapon system R&D is the R&D work process with information sharing by means of IWSDB Since IDEF is suitable for large scale system development like weapon system R&D, further studies on IDEF would be required to achieve the goal of defense CALS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.776-783
• /
• 2011

In modern warfare, jamming for neutralizing the enemy electronic equipments is as important as destroying them by common weapon systems. Noise jamming is a base technique of EA(Electronic Attack) and it is one of the effective jamming techniques. Noise jamming is effective regardless of enemy electronic equipment receiver types. For increasing jamming efficiency using the same output power, noise jamming bandwidth has to be similar to target receiver's bandwidth. Radar jamming source like DRFM(Digital Radio Frequency Memory) requires noise bandwidth changing immediately for time sharing multiple jamming. In this paper, we developed bandwidth changable noise jamming signal for phase sampling type DRFM and do simulation using Matlab for showing the jamming signal output.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.273-288
• /
• 2015

Purpose: In this study, we apply environmental stress screening (ESS) to battle management system (BMS) of a tank and use the ESS profile based on production process data, guided by MIL-HDBK-781/344/2164. Methods: To optimize ESS Profile of the BMS of a tank, we estimate ESS model parameters (e.g., defect density, screening strength) using primary production failure reporting and corrective action system (FRACAS) data of military supply contract firm. Results: First, we collect the Primary production FRACAS data of military supply contract firm. Second, we compute curve fitting approach to find patent defect density and latent defect density using FRACAS data. Third, we solve the equation of Defect Density(patent defect density + latent defect density)($D_{IN}$) and Screening Strength(SS) Using second step data. As a result of analysis according to the order, we calculate $D_{IN}$(Temperature stress case : 74.02, Vibration stress : 10.252) and : SS(Temperature stress case : 0.4632, Vibration stress : 0.4142) and confirm the Condition II-D based on MIL-HDBK-344. According to Condition II-D, it is necessary to modify existing ESS profile through decreasing the $D_{IN}$ and increasing the SS. Conclusion: Identification of defect causes through ESS approach reduce defect densities for production. It provides feedback to a lessons-learned data base to avoid similar problems on next generation tank BMS.