• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.459-464
• /
• 2024

The purpose of this study is to design a toilet lifting seat to prevent falls accidents in the elderly while using the toilet. Prior to design, laws and national standards related to restroom use were investigated and the available space for the assistive devices to be installed was determined. In additions, considering the body size and operating range of the elderly, the optimal final position of the toilet seat is set so that users can use it more safely and conveniently without external help. Moreover, in order to provide an effective standing assistance function, a complex 4-bar link structure was applied to enable simultaneous seat elevation and angle adjustment when operating the device, and the appropriate link shape and dimensions were determined using a linkage program and UG NX. FEA analysis using ANSYS Workbench is performed to ensure the robustness of the stretched linkage and the feasibility of the lifting seat is verified through fabrication.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.515-520
• /
• 2020

The design and actual implementation of the four-bar parallel link was studied in the paper. The parallel four-section link is widely used as a basic kinematic mechanism for transmitting the rotation of one axis to the rotational motion of the other axis. However, the parallel 4 link has a problem that phase reversal occurs at the turning point during the movement. In order to prevent the link reversal, it is known that a double parallelogram-type link is formed by attaching an additional phase reversal suppression link with an offset. However, as a result of the actual fabrication experiment, the movement is not smooth at the transition point. In order to solve this problem, in this study, a link for smooth movement is added in addition to a link that provides an offset to prevent phase reversal, so that the phase reversal does not occur at a specific point when the driven shaft rotates along the drive shaft. The test result confirms the validity of our suggestion.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.766-771
• /
• 2004

In this paper, new exploration mobile robot is presented. This mobile robot, called Robhaz-6W, is able to overcome hazardous terrains, recognize three dimensional terrain information and generate a path toward the destination by itself. We develop the passive four bar linkage mechanism adoptable to such terrain without any active control and the real time stereo vision system for obstacle avoidance, a remote control and a path planning method. And the geometrical information is transmitted to the operator in the remote site via wireless LAN equipment. And finally, experimental results for the passive mechanism, the real time stereo vision system, the path planning are reported, which show the versatility of the proposed mobile robot system to carry out some tasks.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.537-545
• /
• 2010

This study presents a method to evaluate overturning safety and derailment safety of korean tilting train using kinematic analysis of four-bar linkage tilting mechanism. The safety is evaluated considering tilting vehicle body CG displacement. The design sensitivity for stable and safe maximum speed is evaluated around current korean tilting train design data. The current design shows minimum center of gravity displacement. Higher speed can be achieved with larger center of gravity displacement.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.8-17
• /
• 1983

특수(特殊)한 기능(機能)을 수행(遂行)하기 위한 4링크 기구(機構)의 설계(設計)에서는 링크의 연간궤적(連稈軌跡)이 중요(重要)한 설계조건(設計條件)이 된다. 이앙기(移秧機)의 이식기구(移植機構)나 바인던의 방출(放出)암은 모두 4링크 기구(機構)를 이용(利用)하여 작업수행(作業遂行)에 필요(必要)한 연간궤적(連稈軌跡)을 얻고 있는 것이다. 필요(必要)한 연간궤적(連稈軌跡)을 얻기위한 4링크 기구(機構)의 합성(合成)은 도해적(圖解的), 해석적(解析的) 방법(方法)을 통(通)하여 많은 연구(硏究)가 이루어져 왔으며 최근(最近)에는 콤퓨터를 이용(利用)한 기구합성(機構合成)에 대(對)한 연구(硏究)가 활발하게 이루어지고 있다. 본(本) 연구(硏究)에서는 연간궤적상(連稈軌跡上)의 점(點)들을 이용(利用)하여 주어진 연간궤적(連稈軌跡)을 얻기 위한 4링크 기구(機構)의 합성(合成)에 대(對)한 새로운 방법(方法)을 개발(開發)하고 이 방법(方法)을 콤퓨터 프로그래밍하여 주어진 연간궤적(連稈軌跡)과 콤퓨터로 합성(合成)한 4링크 기구(機構)의 연간궤적(連稈軌跡)을 비교(比較)검토 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2008

A specialized anthropomorphic robot hand which can be attached to the biped humanoid robot MAHRU-R in KIST, has been developed. This built-in type hand consists of three fingers and a thumb with total four DOF(Degrees of Freedom) where the finger mechanism is well designed for grasping typical objects stably in human's daily activities such as sphere and cylinder shaped objects. The restriction of possible motions and the limitation of grasping objects arising from the reduction of DOF can be overcome by reflecting a typical human finger's motion profile to the design procedure. As a result, the developed hand can imitate not only human hand's shape but also its motion in a compact and efficient manner. Also this novel robot hand can perform various human hand gestures naturally and grasp normal objects with both power and precision grasping capability.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.2
• /
• pp.154-156
• /
• 2005

We present a case of chondroblastoma in the thoracic vertebra. A 40-year-old patient with upper back pain and lower extremity weakness was admitted to our clinic. On neurological examination, the patient exhibited lower extremity spastic paraparesis. Magnetic resonance imaging revealed a mass infiltrating the 7th thoracic vertebra and its adjacent structures with concomitant compression of the epidural space. After right upper lung tuberculoma was resected through the transthoracic approach, T7 total corpectomy was done with anterior stabilization using a MESH cage and T7 rib bone graft. Two weeks after the first operation, remained part of vertebra was removed and posterior stabilization was performed using a pedicle screw fixation and cross linkage bar with the assistance of the navigation system. The final pathologic diagnosis of the vertebral lesion was benign chondroblastoma.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.563-570
• /
• 2009

In the future, most military activities will be replaced by robots. Because of many dangerous factors in battlefield, reconnaissance should be performed by robot. Reconnaissance robot should be small for not being detected, be light and simple structure for personal portability and overcome unexpected rough terrain for mission completion. In case of small and light robot, it can't get enough friction force for movement. Therefore small reconnaissance robot need jumping function for movement. In this paper we proposed a biologically inspired jumping mechanism. And we adjusted moment and jumping angle by using four bar linkage, especially varying coupler length.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.242-247
• /
• 2016

A robot manipulator handling a heavy weight requires high-capacity motors and speed reducers, which increases the cost of a robot and the risk of injury when a human worker is in collaboration with a robot. To cope with this problem, we propose a collaborative manipulator equipped with a counterbalance mechanism which compensates mechanically for a gravitational torque due to the robot mass. The prototype of the manipulator was designed on the basis of a four-bar linkage structure which contains active and passive pitch joints. Experimental performance evaluation shows that the proposed robot works effectively as a collaborative robot.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2370-2372
• /
• 1998

Recently we have developed an active stereo head-eye system with vergence, name it KIST HECter(Head-Eye System with Colored Stero Vision), based on the analysis of human's neck and eye motion at visual behavior. Our HECter is a five degree-of-freedom system composed of pan and tilt motion in neck part and independent vergence motion of binocular cameras and commonly shared elevation axis in eye part. And stereo vision Provides two color image, which are processed by powerful each TMS32080 vision board. The shape and size are designed to be almost same as human face. The ability to vergence has significant importance and gives many beneficial merits. On its mechanical implementation we adapt a non-parallelogram 4-bar linkage mechanism since it provides high accuracy in transfering motion and enables compact and flexible design.