• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.482-483
• /
• 2009

In chemical mechanical planarization (CMP) process, the uniformity of stress acting on wafer surface is a key factor for uniform material removal of thin film especially in the oxide CMP. In this paper, we analyze the stress on the contact region between wafer and pad with finite-element analysis (FEA). The setting pressure acting on wafer back side was $500g/cm^2$ and the retainer pressure was changed from 300 to $700g/cm^2$. The polishing test is also done with the same conditions. The material removal rate profiles well-matched with stress distribution.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1033-1039
• /
• 2002

Partial penetration welding joint refers to the groove weld that applies to the one side welding which does not use steel backing and to both side welding without back gouging, that is, the partial penetration welding joint leaves an unwelded portion at the root of the welding area. In this study, we analyzed the residual stress and fracture on the thick metal plates that introduced the partial penetration welding method. According to the above-mentioned welding method, we could draw a conclusion that longitudinal stress and traverse stress occurred around the welding area are so minimal and do not affect any influence. We also performed the fracture behavior evaluation on the partial penetration multi pass welding with 25.4 mm thick plate by using the J-integral, which finally led us the conclusion that the partial penetration multi-pass welding method is more applicable and effective in handling the root face with less than 6.35 mm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1496-1508
• /
• 1997

The effects of porous wind fence on the pressure characteristics around a 2-dimensional prism model of triangular cross-section were investigated experimentally. The fence and prism model were embedded in a neutral atmospheric surface boundary layer over the city suburb. In this study, various fences of different porosity, back fence, inclination angle of prism and location of additional back prisms were tested to investigate their effects on the pressure and wall shear stress of the prism surface. The fence and prism had the same height of 40 mm and Reynolds number based on the model height was Re=3.9*10$^{4}$. The porous fence with porosity 40% was found to be the best wind fence for decreasing the mean and pressure fluctuations on the prism surface. By installing the fence of porosity 40%, the wall shear stress on the windward surface of prism was largely decreased up to 1/3 of that without the fence. This indicates that the porous fence is most effective to abate the wind erosion. Pressure fluctuations on the model surface were decreased more than half when a back fence was located behind the prism in addition to the front fence. With locating several back prisms and decreasing the inclination angle of triangular prism, the pressure fluctuations on the model surface were increased on the contrary.

• Journal of Acupuncture Research
• /
• v.20 no.6
• /
• pp.36-44
• /
• 2003

Objective: We have various ways in evaluating the level of low back pain as sequelae, general approaches such as neurologic examination, MRI, Radiologic examination and evaluating the effect of psychological stress on the low back pain. Besides We can find another approach to evaluating the sequale of low back pain in TA patients. So, I intend to analyze how much relationship the patients that got low back pain by TA have with Roland Morris Disability Scale(RMS) in 2 months after discharge. Methods: In this article, I will compare two results of TA inpatients and non-TA inpatients, which obtained with the RMS. This study was carried out about 22 TA patients and 18 non-TA patients, who had low back pain and were hospitalized between March 2002 and July 2002. Results & conclusions : 1. RMS point is related with the post-discharge term to a point of time of answering the questionnaire in both TA patients and non-TA patients. 2. In distribution of RMS point, Gr II take most possesion as 41% in TA patients while Gr I take most possesion as 56% in non-TA patients. 3. In distribution of RMS point, patients that correspond to more than Gr III take 27% in TA patients, 16% in non-TA patients. 4. TA patients show higher level of distribution than non-TA patients in RMS point in verifying them by mean value and T-test. 5. Degree of pain score change(${\Delta}$P.S), using mean value and T-test, showed lower level of distribution in TA patients than non-TA patients. 6. We can see that TA patients have more restriction in their life for low back pain.

• Research in Community and Public Health Nursing
• /
• v.7 no.2
• /
• pp.400-409
• /
• 1996

To investigate industrial fatigue and low back pain, the questionaire survey for subjective symptoms of fatigue and low back pain was carried out among 591 male workers aged 20-55 employed in an automobile industry in Korea. Workers participated to this study were divided into low back pain group(LBP) and control group, according to the self-reports by written questionaires. The subjective sysptoms of fatigue comprised three groups of 10 items each, representing dullness and sleepiness(level of cerebral activation), difficulty in concentration(level of motivation) and bodily projection of fatigue. The resultant data were processed for $\chi^2-test$, t-test and a pearson's correlation coefficient to confirm the relationships. The results were as follows: 1. 30 items of fatigue subjective symptoms exeptone item, 'lack in perseverance', were directly associated with low back pain. 2. The percentage of fatigue complaint were sig nificantly higher in LBP group. 3. Of the 30 items of fatigue subjective symptoms, the highest percentage was accounted for 'eye strain'(27.9%), followed by 'whole body feels tired' and 'legs feel heavy'(22.9%), 'feel like lying'(21.4%), 'feel a pain in the low back'(18.7%), 'feel drowsy'(16.4%) and 'feel stiffness in the neck or the shoulders'(16.2%) in the order of sequence. 4. The average weighted score for the first group of fatigue items(dullness and sleepiness) was the largest among three groups and was followed by the second group(difficulty in concentration) and the third group(bodily projection of fatigue) in the order of sequence, suggesting the heavier shift work stress of the workers. 5. In the groups of the aged 30-40, work duration of 5-7yrs, heavy work amount and irregular work speed, significant high fatigue complaints were revealed in terms of eye strain, whole body feels tired, legs feel heavy, feel like lying, feel a pain in the low back and feel stiffness in the neck or the shoulders. 6. A significant negative correlations were shown between age, work duration and eleven subjective symptoms while positive reciprocal correlations were shown between eleven items with one another.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.38-44
• /
• 2008

Light guide plate is one of most important components which are composed of back light unit, affecting the quality and performance of LCD. Average brightness and uniformity are especially key factors for designing the light guide unit. These qualities are affected and controlled by the pattern being attached to the back of light guide unit. In order to obtain high brightness and uniformity the optimized pattern design is adopted for LGP. In this study, optimized molding condition for LGP with 0.4 mm thickness was obtained by using the Moldflow simulation software and the optimized pattern for better brightness uniformity was designed for the thickness of the 0.4 mm by trial and error method. The brightness was measured for the different LGP thicknesses and the residual stress analysis was performed for 0.4 mmthickness by the photoelasticity and the results are compared with 0.5 mm, 0.6 mm thickness.

• Tunnel and Underground Space
• /
• v.12 no.1
• /
• pp.37-42
• /
• 2002

A back analysis algorithm was developed to determine the major parameters for tunnel design; the elastic modulus(E) and the ratio of horizontal to vertical stress(K). The algorithm is based on direct search method and was coded by FISH language of FLAC, a commercial finite difference program. Developed code was applied on some models to verify the validity and estimate the efficiency of the algorithm. Verification by theoretical solutions and published results of Gens' research, was successful.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.258-269
• /
• 1999

It is important to evaluate fatigue damage of in-service material in respect to assure safety and remaining fatigue life in structure and mechanical components under cyclic load . Fatigue damage is represented by mathematical modelling with crack growth rate da/dN and cycle ration N/Nf and is detected by X-ray diffraction and ultrasonic wave method etc. But this is estimated generally by single parameter but influenced by many test conditions The characteristics of it indicates fatigue damage has complex fracture mechanism. Therefore, in this study we propose that back-propagation neural networks on the basis of ration of X-ray half-value breath B/Bo, fractal dimension Df and fracture mechanical parameters can construct artificial intelligent networks estimating crack growth rate da/dN and cycle ratio N/Nf without regard to stress amplitude Δ $\sigma$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• The Journal of Korean Physical Therapy
• /
• v.11 no.2
• /
• pp.123-130
• /
• 1999

Objectives : This study was to investigate the experience rate and factors related with Low Back Pain(LBP). Methods : Questionnaires were completed by 236 dental hygienists in Taegu city and Kyungpook province in June 23-27, 1999. The solicited information was used to estimate odds ration and $95\%$ confidence intervals for the LBP related factors association. Results : The experience rate of LBP was $78\%$. The experience rate of LBP was significantly associated with scaling posture(odds ratio=2.228)(p=0.0371) and stress with dentist(odds ratio=2.767) (p=0.0136). Conclusions : Data from this study support a statistically significant association between LBP and some factors found in other research to increase the relation with LBP. Study findings may have implications for targeting at dental hygienists for scaling posture education or intervention program.