• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.466-471
• /
• 2007

Brackets for an automatic transmission are usually used to connect the transmission with adjacent components in a vehicle. Fillet areas of brackets are one of the most important areas to design the brackets because the areas are easily fractured when the brackets are subjected to external loads. In this study, a new design around the fillet area of the bracket is suggested and improved effects of the proposed design are proved through the comparison of safety factors with the current design. The safety factors are calculated through the fatigue analysis via a commercial code, FEMFAT.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.62-68
• /
• 2019

In this paper, we describe the design and manufacture of a control system for an automatic loading system that inserts and removes workpieces after machining. The control system was manufactured using DSP for high speed and consists of a power unit, a control unit, a communication unit, and a display unit. We connected the control system to the mechanical system of the automatic workpiece loader to test the characteristics, which allowed us to raise and lower the automatic workpiece loading system to the desired position. The successful test demonstrates that we can use the control system to control the workpiece automatic loading system.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.43-49
• /
• 2001

When designing a gerotor, designers determine basic dimensions of a gerotor with transmitted power considering strength, interference and so. on. But, designers can not easily obtain the tooth profile generated by dimensions as well as the geometry bob for cutting the tooth profile. In order to resolve these problems, an automatic design sys-tem creating not only the solid model of a gerotor but also that of the generating hob using the design parameters of dimen-sions is developed. Through the developed system, designers can improve the efficiency of design and satisfy the variable requirements of design as well. In this research, the three-dimensional solid models for gerotors are generated considering the design parameters. Besides, those for generating hob regarding the design parameters of hob is created automatically.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.327-330
• /
• 2003

The objectives of this study are to develope the automatic design programs to offer the data when constructing a small scale vinyl-house by region. This program consists of four subroutines. The first is an automatic greenhouse modeling program, the second is a calculating design load program by region, the third is a structural analysis program and the last is a optimum shape design program. The structural analysis can be conducted by simple date input and considering the design load of the install regions into account. The shape of input data is very simple, and the program reflects the design load by region. The output data can be obtained from the automatical calculation processing after structural analysis. The program was verified by compared with outputs of a common use structural analysis program and the results are the same. It was concluded that the developed program could be used efficiently in optimum design of small scale vinyl house.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.888-893
• /
• 2000

This paper deals with the development of an automatic design software for DC servo motor control, which provides good performance with rapid response and velocity control accuracy. In the proposed method, the design is automatically executed using Matlab, and iterative learning control algorithms are used in the design process. We applied this method to 50W, 100W, 200W, 300W, 500W, 750W, 1.8kW and 4.5kW DC servo motors which are widely used in the industry. We compare the results of the manual tuning design method with that of the automatic design method presented in this paper. From the experimental results, we can find that the performance of the proposed method is better than that of the manual tuning design method.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.235-246
• /
• 2014

The automatic seismic trip system (ASTS) continuously monitors PGA (peak ground acceleration) from the seismic wave, and automatically generates a trip signal. This work presents how the system can be designed by using a systems engineering approach under the given regulatory criteria. Overall design stages, from the needs analysis to design verification, have been executed under the defined processes and activities. Moreover, this work contributes two significant design areas for digitalized ASTS. These are firstly, how to categorize the ASTS if the ASTS has a backed up function of the manual reactor trip, and secondly, how to set the requirements using the given design practices either in overseas ASTS design or similar design. In addition, the methodology for determining the setpoint can be applied to the I&C design and development project which needs to justify the error sources correctly. The systematic approach that has been developed and realized in this work can be utilized in designing new I&C (instrument and control system) as well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.299-301
• /
• 2005

The urban transit system is operated by driverless and automatic.In driverless and automatic system, the system function is accomplished exactly to obtain the safety and reliability of system and the system is designed to minimize risk. In order to design the system, the functional analysis is performed. Recently functional analysis is performed by design toolwhich is used and verified by aerospace, military, etc. Generally, the design tool is used to perform functional analysis in urban transit system development project. The design toolassist the system engineer to analysis the function of system in basic design. Therefore, In this paper, it is performed the functional analysis to satisfy the system requirement of urban transit system and to confirm the operation of system using design tool.

• 한국측량학회지
• /
• 제11권2호
• /
• pp.89-100
• /
• 1993

본 연구는 CAD와 LISP(LIST Processing)을 이용한 도로노선 결정에 있어서의 토공량 산정에 관한 연구이다. 컴퓨터의 비약적인 발전과 산업분야에서의 이용증대는 CAD/CAM/CAE 기술의 발전으로 이어져 자동설계 및 자동제작을 가능케 하고 있으며 또한 토목설계의 자동화도 꾸준히 추진되어 오고 있는 실정이다. 이러한 자동화 작업의 일환으로 본 연구에서는 도로노선 결정시 각 노선의 토공량 산정을 자동화하여 토목설계업무의 효율성을 높이고자 하였다. 연구의 방법으로 지형도에 DTM(Digital Terrain Model) 개념을 도입하여 지형정보를 자동독취할 수 있도록 프로그램화 한 후 이 데이타를 가지고 LISP 언어를 이용하여 체계적인 알고리즘을 만든 후 CAD 시스템과 접목시켜 종·횡단 면적과 토공량을 산정해서 유토곡선을 출력하는 자동설계 시스템을 시험적으로 구축하는 데 그 목적을 두고 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.213-218
• /
• 2008

Recently automatic construction system is attended in construction domains because of the increase of aged workers and the shortage of the experienced. The research level of automatic construction system in Korea will soon attain to the stage of full automation like Japan, which is the highest level in the world. However, in the fully automated level, it is difficult for the automatic system to operate flexibly like the human in various work condition. In the result, the higher the level of automation in the system is, the less efficient the automatic system work in the site. So, it's necessary the development material design to compensate for the flexibility shortage of the system. Therefore, this study proposes the development process to material design suitable for automatic construction system using QFD technique.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1790-1795
• /
• 2000

송전선로에 새로운 Spacer damper를 설계하는데 이 논문의 목적이며, 이 설계되는 새로운 Spacer damper는 매우 중요한 특징과 장점을 가지고 있다. 또한, 최근 Spacer damper의 문제가 프랑스, 일본 등 다른 나라에서도 자동화 시스템과 함께 많이 발전되어 왔다. 개발된 Spacer damper외 설치는 특별한 기기없이 설치가능하며, 최근 자동 클램핑 장치 이용한 Spacer damper가 도입되어 피로 파괴와 미풍진동에 매우 효과적임이 입증되었고 보수유지가 거의 필요없으므로 경제성도 높으나 고가의 수입가격으로 인해 국산화의 필요성이 절실하다.