• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.337-342
• /
• 2014

The reduction of drag torque is an important research issue in terms of improving transmission efficiency. Drag torque in a wet clutch occurs because of the viscous drag generated by the transmission fluid in a narrow gap (clearance) between the friction plate and a separate plate. The objective of this paper is to observe the effects of the friction plate area and the clearance on the drag torque using finite element simulation. The two-phase flow of air and oil fluid is considered and modeled for the simulation. The simulation analysis reveals that as the rotational speed increases, the drag torque generally increases to a critical point and then decreases sharply at a high speed regime. The clearance between the two plates plays an important role in controlling drag torque peak. An increase in the clearance causes a decrease in shear stress; thus, the drag torque also decreases according to Newton's law of viscosity. An observation of the effect of the area of contact between transmission fluid and friction plate shows that the drag torque increases with the contact area. The flow vectors inside the flow channel present clear evidence that the velocity of the fluid flows is faster with a larger friction plate, that is, in the case of a larger contact area. Therefore, the optimum size of the friction plate should be determined carefully, considering both the clutch performance and drag reduction. It is expected that the results from this study can be very useful as a database for clutch design and to predict the drag torque for the initial design with respect to various clutch parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4576-4582
• /
• 2010

Because most of vehicle provide users with the very limited information regarding the performance of vehicle, it is quite difficult for users to drive vehicles safe, and to maintain and repair vehicles properly. In order to solve the above-mentioned problems, several ways of research and development for the vehicle control and diagnosis system have been recently carried out. However, a lot of complicated problems and difficulties were arising due to the complexity of the developed system, degradation of the reliability for the vehicle performance control system, operational malfunction and so on. In this paper, for the purpose of solving the difficult problems and technical limitations, a system for vehicle performance which might be able to diagnose the reliability of vehicle performance by measuring and analyzing the real time performance of vehicle using the satellite telemetry technology was conmance oly defined and deehiced.hihe results derived from the cormance ofdvehiclactivities in this study shall be used as not only fundamental data but also materials for the detailed design for the implementation of vehicle performance diagnosis system in the near future.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.314-321
• /
• 2020

Logic automated stimulus and response (LASAR) software is an automatic test program development tool for logic function test and fault detection of avionics components digital circuit cards. LASAR software needs to the information for the logic circuit function and input and output of the device. If there is no component information, normal component modeling is impossible. In this paper, component modeling is carried out through reverse design of programmable logic device (PLD) device without element information. The developed LASAR program identified failure detection rates through fault simulation results and single-seated fault insertion methods. Fault detection rates have risen by 3% to 91% for existing limited modeling and 94% for modeling through the reverse design. Also, the 22 case of stuck fault with the I/O pin of EP310 PLD were detected 100% to confirm the good performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.933-939
• /
• 2007

There is a tremendous increase in the growth of Internet making people's life easy. The rapid growth in technology has caused misuse of the Internet like cyber Crime. There are several vulnerabilities in current firewall and Intrusion Detection Systems (IDS) of the Network Computing resources. Automatic real time station chase techniques can track the internet invader and reduce the probability of hacking Due to the recent trends the station chase technique has become inevitable. In this paper, we design and implement Active Security system using ICMP Traceback message. In this design no need to modify the router structure and we can deploy this technique in larger network. Our Implementation shows that ICMP Traceback system is safe to deploy and protect data in Internet from hackers and others.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.95-98
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the informatin and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. there is ISO/IEC 18000-7 as typical standard of active RFID. it is single channel system of 433.92MHz and has limitation of collection of a number of tags. to overcome limitation of collection of many tags, we propose the new 2.4GHz active RFID technology which can use the multi-channel. if reader has multi-interface and uses another channel in each, reader could fast collect the tags. but, if a reader which has many interfaces collects tags through the specific interface, the performance may not improve any more comparing with a reader using single interface. in this paper, we show the fast collection through design and implementation of protocol for load balancing between interfaces in multi-interface RFID reader.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.844-847
• /
• 2012

인공위성의 개발은 오랜 기간에 걸쳐 다양한 분야의 전문가들에 의해 개발된 결과물들이 통합되어 완성될 수 있다. 위성개발과 같이 많은 개발자가 공동으로 작업하여 하나의 결과물을 생산하는 경우 개발과정에서 방대한 양의 문서작업이 수반된다. 특히 비행소프트웨어와 같이 서로 다른 개발자에 의해 작성된 코드들이 하나의 이미지로 통합되어 빌드될 경우 발생하는 문제점들을 해결하고 요구되는 기능들을 디버깅하기 위해서는 개발과정 및 소스코드에 대한 문서들이 필수적이다. 이러한 소프트웨어 설계에 대한 문서는 그 양이 방대하고 소스코드와의 연계성이 필요하기 때문에 소스코드를 작성한 각 개발자들이 직접 수작업으로 문서를 작성하였다. 예를 들면, 기존의 위성비행소프트웨어 개발과정에서는 이러한 문서들 중 전체 위성비행소프트웨어의 단위 코드별 입출력, 수행기능 등의 상세 설계 내용을 기록하는 SDD(Software Design Description)는 개발자가 작성한 코드를 기반으로 수작업을 통하여 작성되었다. 이러한 작성방식은 작성자의 입력오류가 발생할 수도 있으며 소프트웨어 개발과 별도로 수작업이 요구되어 문서작성에 소요되는 시간적 손해가 발생하게 된다. 유럽에서는 이러한 문제점을 보완하기 위하여 C, C++, C#, JAVA, VHDL 등 다양한 언어를 사용하는 소프트웨어 개발에 적용 가능한 자동적 문서작성 도구인 Doxygen을 설계 및 개발문서 작성에 활용하고 있다. Doxygen은 PDF, HTML, Latex, RTF 등 다양한 출력 포맷도 지원한다. 본 논문에서는 Doxygen을 활용하여 위성비행소프트웨어 개발문서의 작성 시 소요시간을 단축하고 소스코드로부터 해당 설계 내용을 추출하여 자동적으로 문서를 작성할 수 있는 방안에 대하여 소개한다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1355-1369
• /
• 2018

As smart bands make life more convenient and provide a positive lifestyle, many people are now using them. Since smart bands deal with private information, security design and implementation for smart band system become necessary. To make a trustworthy smart band, we must derive the security requirements of the system first, and then design the system satisfying the security requirements. In this paper, we apply threat modeling techniques such as Data Flow Diagram, STRIDE, and Attack Tree to the smart band system to identify threats and derive security requirements accordingly. Through threat modeling, we found the vulnerabilities of the smart band system and successfully exploited smart bands with them. To defend against these threats, we propose security measures and verify that they are secure by using Scyther which is a tool for automatic verification of security protocol.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.4
• /
• pp.457-466
• /
• 2021

This paper describes the design of model-based fault diagnosis software to apply to the propulsion system in tracked amphibious assault vehicle which consists of an engine, a transmission, a cooling system, and two waterjets. This software includes specific functions to detect the failures regarding sensor malfunctions, mechanical malfunctions, control errors, and communication errors. This software generates the proper malfunction codes which are classified as the warning and caution. In order to validate the fault diagnosis software, the manual and automatic test are performed using the test program with 32 test cases. Test results show that the designed fault diagnosis software is reliable and effective for applying to the propulsion system.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.258-268
• /
• 2021

Online learning systems are becoming an effective educational medium for many universities. The accessibility of online learning system in universities means that every student, including the visually impaired, is able use all the site's services. This research focuses on investigating the accessibility of online learning systems for visually impaired users. The paper purpose is to understand the perception of visually impaired undergraduate students towards Blackboard's accessibility and to make recommendations for a new Blackboard design with accessible features that support their needs. Impact of a new Blackboard design with accessible features on visually impaired students, using Taif University students as a case study is evaluated in this paper, as it is similar to most learning systems used by Saudi universities. A study on Taif University's utilization of Blackboard was conducted using mixed method approaches (an automatic tool and a user study). In the first phase, Taif's use of Blackboard was evaluated by the web accessibility tool called AChecker. In the second phase, we conducted a user study to verify previously discovered accessibility challenges to fully assess them according to the accessibility and usability guidelines. In this study, the accessibility of Taif University's Blackboard was evaluated by thirteen visually impaired undergraduate students. The results of the study show that Blackboard has accessibility issues, which are confusing navigation, incompatibility with assistive technologies, untitled pages or parts, unclear identification for visual elements, and inaccessible PDF files. This paper also introduces a set of recommendations that aim to improve the accessibility of Blackboard and other educational websites developed for this population. It also highlights the serious need for universities to enhance web accessibility for online learning systems for students with disabilities.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.193-200
• /
• 2021

In order to prevent illegal fishing and reduce lost fishing gear, it is necessary to develop a constant and continuous fishing gear monitoring system in the marine environment. In this paper, we design a long-term operational, reliable system model with communication coverage of more than 25Km considering the reality of gradually expanding fishing activity due to the depletion of fishery resources and marine environments. The design results are implemented to verify the operability of the system by separating the communication success rate of SKT and private LoRa networks and verifying the control function of each control system through the collected location information, respectively.