• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.270-277
• /
• 2008

Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

• Journal of the Korean earth science society
• /
• v.23 no.5
• /
• pp.424-435
• /
• 2002

This study analyzes the surface ozone and meteorological data in Daegu for a period from 1997 to 1999. It also investigates the meteorological characteristics of high ozone episodes. For this study the high ozone episode has been defined as a daily maximum ozone concentration higher than 100ppb in at least one station among six air quality monitoring stations in Daegu, Korea. The frequency of episodes is 13 days. The frequency is the highest in May and September. The average value of daily maximum ozone concentration is 81.6ppb, and 8-hour average ozone concentration is 58.6ppb for the high episodes. This shows that ozone pollution is continuous and wide-ranging in Daegu. The daily maximum ozone concentration is positively correlated to solar radiation and daily maximum temperature, but negatively correlated to relative humidity, wind speed and cloud amount. The maximal correlation coefficient to solar radiation is 0.45. The differences between high ozone episode day's daily mean meteorological value and monthly mean value are +1.58hPa for sea level pressure, +3.45${\circ}$C for maximum temperature, -5.69% for relative humidity, -0.46ms$^{-1}$ for wind speed, -1.79 for cloud amount, and +3.97MJm$^{-2}$ for solar radiation, respectively. This shows that strong solar radiation, low wind speed and no precipitation between 0700${\sim}$1100LST are favorite conditions for high ozone episodes. It is related to the morning stagnant condition.

• 한국지구과학회:학술대회논문집
• /
• 2005.02a
• /
• pp.203-212
• /
• 2005

The purpose of this study was to develop e-learning contents and to examine how ICT-powered instruction using the developed e-learning contents affects the science achievements of students and how the students respond to that. After an experiment in the 7th class of the weather condition unit in high school earth science, e-learning contents were prepared by using the videotaped material and flash animation to teach key learning points. The selected two different classes, experimental and control groups, shows almost the same final scores in the first semester. The experimental group received ICT-powered instruction with the contents developed in the study, and the control group received a typical expository lesson. And then the achievement test was done to these two groups, separately. The major findings of the study were as follows: As for the effects of ICT-powered instruction on the academic achievement, the average scores of the experimental group is higher than that of the control group, but the difference is insignificant. When each group was subdivided into the upper and lower groups, the upper group got higher average scores and the difference was significant. But there was no significant disparity between the lower groups. Therefore, the ICT-powered instruction using the e-learning contents gives a good effect on the students whose levels are higher than the average. In the questionaike about the ICT instruction, they generally had a positive opinion about its impact on learning interest and class participation and its learning effects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.293-301
• /
• 2017

A Sub-kWe small-scale experimental test loop was manufactured to investigate characteristics of the supercritical carbon dioxide power cycle. A high-speed turbo-generator was also designed and manufactured. The designed rotational speed of this turbo-generator was 200,000 rpm. Because of the low expansion ratio through the turbine and low mass flowrate, the rotational speed of the turbo-generator was high. Therefore, it was difficult to select the rotating parts and design the turbine wheel, axial force balance and rotor dynamics in the lab-scale experimental test loop. Using only one channel of the nozzle, the partial admission method was adapted to reduce the rotational speed of the rotor. This was the world's first approach to the supercritical carbon dioxide turbo-generator. A cold-run test using nitrogen gas under an atmospheric condition was conducted to observe the effect of the partial admission nozzle on the rotor dynamics. The vibration level of the rotor was obtained using a gap sensor, and the results showed that the effect of the partial admission nozzle on the rotor dynamics was allowable.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.35-41
• /
• 2013

In this study, we tried to overcome a limit in cutting timing of reed culm by applying a plant hormone, indole-acetic acid (IAA) as a growth regulator with various contents ($10^{-3}$ M, $10^{-6}$ M, $10^{-9}$ M, $10^{-12}$ M). 19 shoots emerged from 240 segments of hardened reed culm from montane fen and eight out of the 19 shoots emerged by $10^{-6}$ M IAA treatment as the most in $5^{th}$ Sep. 2012. 50 shoots emerged from 60 segments of non-hardened reed culm from a population in Seoul National University transplanted from Mt. Odae by $10^{-6}$ M IAA treatment despite the cutting was performed about two weeks later ($19^{th}$ Sep.). Via third cutting experiment performed about 40 days later ($29^{th}$ Oct.), only two shoots out of 60 segments were observed by the same experimental condition except atmospheric temperature. It seemed likely that it was too low temperature in third experiment ($10^{\circ}C$) than the former experiments (about $20^{\circ}C$) to form adventitious buds from culm segment. We recommend to utilize the thick reed culm in culm cutting as possible because the thicker culm segment we used, the thicker emerged shoot we could observe (i.e., diameters of emerged shoots were about 20% of the planted segment's diameters).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.103-117
• /
• 2017

This note provides technical guide on three issues associated with establishing and automatically running regional ocean forecasting systems: (1) a strategy for continuous production of hourly-interval three-day ocean forecast data, (2) the daily download of ocean and atmospheric forecasting data (i.e., HYCOM and NOAA/NCEP GFS data), which are provided by outside institutions and used as initial condition, surface forcing, and boundary data for regional ocean models, and (3) error notifications to numerical model managers through the Short Message Service (SMS). Guidance on dealing with these three issues is illustrated via solutions implemented by the Korea Hydrographic and Oceanographic Agency, since in embarking on this project we found that this procedural information was not readily available elsewhere. This technical guide is based on our experiences and lessons learned during the process of establishing and operating regional ocean forecasting systems for the East Sea and the Yellow and East China Seas over the 5 year period of 2012-2016. The fundamental approach and techniques outlined in this guide are of use to anyone wanting to establish an automatic regional and coastal ocean forecasting system.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.42-50
• /
• 2019

As the industry develops in Korea, the use of hazardous chemicals is increasing rapidly and chemical accidents are increasing accordingly. Most of the chemical accidents are caused by leaks of hazardous chemicals, but there are also accidents in which all the substances are released instantaneously due to sudden high temperature/pressure or defection of the storage tanks. This is called catastrophic failure and its frequency is very low, but consequence is very huge when it occurs. In Korea, there were 15 casualties including three deaths due to catastrophic rupture of water tank in 2013, and 64 instances of failures from 1919 to 2004 worldwide. In case of catastrophic failure, it would be able to overflow outside the bund that reduces the evaporation rate and following consequence. This incident is called overtopping. Overseas, some researchers have been studying the amount of external overflow depending on bund conditions in the event of such an accident. Based on the previous research, this study identified overtopping fraction by condition of bund in accordance with Korea Chemicals Controls Act Using CFD simulation. As a result, as the height increases and the distance to the facility decreases while meeting the minimum standard of the bund capacity, the overtopping effect has decreased. In addition, by identifying the effects of overtopping according to atmospheric conditions, types of materials and shapes of bunds, this study proposes the design of the bund considering the effect of overtopping caused by catastrophic failure with different bund conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2019

In this study, to propose the deterioration curves of urethane, ceramic, polysiloxane and fluorocarbon coating for the steel bridge, an accelerated corrosion tests were carried out. The each coating system wes applied on the top of the specimens, and circular initial defects were introduced with different diameters with 0.5, 1.0, 3.0, 5.0 mm. An accelerated corrosion test condition was used to simulate severe corrosive environment depending on ISO 20340. The deterioration curve of each coating type was evaluated based on deteriorated area from the circular defects. In order to evaluate the coating service life of installed steel bridge using deterioration curve, the acceleration coefficient was calculated at correlation between ISO 20340 and corrosivity categories by ISO 9223 based on field corrosion rate. From test results, the propagation rate of coating deterioration area was different to diameter of circular defects. In case of urethane coating, the coating service lifes of 3% deterioration area was evaluated in 31.8, 15.8, 9.9 and 3.9 years with C2, C3, C4 and C5 category.

• Plant Journal
• /
• v.14 no.4
• /
• pp.33-38
• /
• 2018

In this study, it was confirmed whether the cooling water bypass ratio of packing for plume abatement matched designed value during winter operation of combined cycle power plant. Designed operating wet bulb temperature of the plume abatement cooling tower with 29 Gcal/h capacity had a range from $13^{\circ}C$ to $-20^{\circ}C$, while its designed bypass ratio was from 0 % to 78%, so that increasing rate of the designed bypass ratio was $2.36%/^{\circ}C$ when the external temperature decreased. When the wet bulb temperature at cooling tower inlet had a range from $7.8^{\circ}C$ to $-11.8^{\circ}C$ in a normal operation, it was measured that actual bypass ratio of packing for plume abatement had a range from 23.8 % to 74.3%. While increasing rate of the actual bypass ratio was $2.71%/^{\circ}C$ in a range from $7.8^{\circ}C$ to $-9.55^{\circ}C$, it was $1.61%/^{\circ}C$ under $-10^{\circ}C$ in cold weather condition according to atmospheric temperature drop, therefore it was confirmed that the increasing rate of the bypass ratio for packing was lowered than its design.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.665-669
• /
• 2023

The crude methylnaphthalene oil (CMNO) contains nitrogen compounds (NCs) such as quinoline (QU), isoquinoline (IQU), and indole (IN). These NCs in the CMNO are treated as impurities contained in the CMNO due to contamination of the atmospheric environment and unpleasant odors. In order to improve the quality of CMNO, this study examined the effect of extraction experimental factors on the reduction of NCs contained in CMNO using CMNO as a raw material and an aqueous formamide solution as a solvent, respectively. The increase in the volume ratio of solvent to feed in initial (S/F)₀ in initial increased the distribution coefficient of NCs and the selectivity of NCs in reference to 2-methylnaphthalene (2MNA). Additionally, an increase in operating temperature (T) increased the distribution coefficient of NCs but conversely decreased selectivity. The compositions of QU, IQU, and IN in the raffinate oil recovered through equilibrium extraction under a constant condition (volume fraction of water to solvent in initial (y_w,0) = 0.1, (S/F)₀ = 9, T = 303 K, liquid-liquid contacting time = 72 h) were reduced by about 58.5 wt%, 61.9 wt%, and 73.4 wt%, respectively, compared to those of CMNO. The formamide extraction method in this study was expected to be an effective reduction method for NCs contained in CMNO.