• The Journal of the Korean dental association
• /
• v.9 no.1
• /
• pp.49-53
• /
• 1971

Authors observed 12 cases among the 46 corps which are died from 'charring', caused by traffic accident, for the purpose of individual identification. Concerning to the method of identification, authors took the dental hard tissue which is high in resitance to heat, using the method of Forensic Odontology and got a good results from it. In this inspection, we observed 'pugilistic posture' which results from heat coagulation & shrinkage of muscular bundle with predominance of the stronger flexor muscles. On the other hand, there appeared the fact that hair is more resistant to heat than skin or muscle.

• Korean Institute of Interior Design Journal
• /
• no.4
• /
• pp.16-21
• /
• 1995

Although it has been suggested that lighting influences our moods, little is known about dimensionality of mood patterns. The knowledge of consumer's mood pattern in lighting condition may provide interior designers with a valuable information for the lighting design. This article investigates the underlying structure of moods occuring in lighting conditions. Meanwhile, this examines custom-ers' desired mood type of lighting, and explores the influ-ence of individual characteristics on selecting the preffered lighting moods. The result uncovers five discriminable patterns of mood-dynamic, intimate, delightful, elegant, and serene feeling results from well organized lighting system. Among the five moods, serene atmosphere appears to be the most preffered mood from respondants. It is also found that the perceived preference of lighting atmo-sphere varies across personal characteristics of the cus-tomers, socio-economic differences and the visiting pur-poses to the coffeeshop. These findings present interest-ing and potentially valuable implications for interior de-signers that proper planning of lights which inducemoods can achieve dramatic effects and aid in the cre-ation of the desired atmosphere.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.220-229
• /
• 2002

협력적 추천 기법은 유사한 이웃의 선호도를 이용하여 고객에게 개인화된 아이템을 추천해 주는 방법으로 비교적 높은 정확도를 보이며 추천 시스템의 중심으로 연구되어져 왔다. 그러나, 지금까지의 추천 시스템은 도메인의 특성을 제대로 고려하지 못한채 추천을 시행함으로써 특정 도메인에서 추천의 정확도가 떨어지는 문제점이 발생하였다. 이러한 문제점들을 보완하기 위하여 본 논문에서는 평균 고객 유사도, 평균 아이템 유사도, 밀집도 등의 추천 선행 평가 척도를 제안하고, 추천 선행평가 척도와 추천의 정확도와의 상관관계를 보이며, 이를 이용하여 짧은 수행시간 안에 추천 적용이 가능한 마케팅 도메인 및 고객군을 선정하는 방법을 제시한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1720-1730
• /
• 1995

Finite-difference analysis was conducted to study the natural convection of a stably stratified salt-water solution in an annulus due to lateral heating. The main purpose of this study is to examine in detail the multi-layered flow structure. Calculation was thus made for R $a_{\eta}$=2*10$^{5}$ and 6.5*10$^{5}$ . Formation of layered flow structure, merging process of layers, the corresponding temperature and concentration distributions, Nusselt number variations with time are examined. Numerical results show that in each layer, the temperature profile looks 'S`-shaped and the concentration profile is uniform due to the convective mixing. The formation of the roll and the layer is governed by natural convection due to the temperature gradient and the merging process of the layer by diffusion of the concentration.ation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.871-879
• /
• 1998

The refrigerator consists of many components such as compressor condenser expansion valve evaporator and the cabinet which filled by urethane foam. In this paper the heat leakage of refriger-ator is measured by the new experiment method which is different from a present method, The devi-ation of the UA(overall heat transfer coefficient times area) between the simulation and experiments is about 7-8%. Using the modeling of various components of refrigeration system a performance analysos of CFC 12 and HFC 134a is performed numerically on the UA. As the results of this study according to increase the heat leakage the refrigeration load and mass flow rate of refrigerant are increased. And the increase of the mass flow rate results in the increase of the condensing and evapo-rating temperature. Therefore according to increase of the heat leakage the COP leads to increase because the increase of refrigeration capacity is larger than the increase if compressor power.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.84-84
• /
• 2000

This paper proposes a new impedance control scheme based on a variable stiffness matrix for a bilateraL teleoperation. In this scheme, stiffness matrix of the impedance model in the slave is modulated based on the distance, measured by an ultrasonic sensor, between the slave and environment. At the same time, the stiffness matrix of the master is also changed accordingly in order for the impedance parameters of the combined system to remain constant The proposed scheme is implemented on a 1-dof master/slave system to perform a simple task. In the experiments, the teleoperator with the impedance parameter modulation shows better performance than one with fixed impedance parameters, especially in reducing task execution time and in avoiding excessive external forces.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.588-592
• /
• 1997

The new type ligand, bisphosphonites, were easily prepared through ligand exchange reaction of bis (diethylamino)phosphine with diols. These bisphosphonites reacted with $(COD)^2Rh^+BF_4\;^-$ to corresponding bisphosphonite-rhodium(I) comlexes, of which X-ray crystallography was for the first time investigated. This organometallic compound was applicated in hydroformylation reaction as catalyst, and proved to be very effective one.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.1
• /
• pp.129-136
• /
• 2006

A new guidance synthesis for anti-ship missiles to control impact angle and impact time is proposed in this paper. The flight vehicle is assumed as a 1st order lag system to consider more practical system. The proposed guidance synthesis enhances the survivability of anti-ship missiles because multiple anti-ship missiles with the proposed synthesis can hit the target simultaneously. The control input to satisfy constraints of zero miss distance and impact angle, and the feedforward bias control input to control impact time constitute the guidance law. The former is from trajectory shaping guidance, the latter is from neural network. And particle swarm optimization method is introduced to furnish reference input and output for learning in neural network. The performance of the proposed synthesis in the accuracy of impact time and angle is validated by numerical examples.

• Korean Journal of Social Welfare
• /
• v.3
• /
• pp.47-62
• /
• 1982

This paper is intended to study actual condition and problems of Social Welfare, and to institute the plan of social welfare administ ration. Recently, Social welfare agendas, public and private, in our country adhere to traditionary and temporary relief of the clients. The improvement of social work is neglected among some pravile social welfare organization in this society are as follows : Firstly, Big enterprises should undertaken the non-earnest social welfare foundation, this plan, however, can be eastablished by policy making of the proper authorities. Secondly, improvement of public institution and personnel administration should be stressed and innovated. Thirdly, We should not rely on the other social welfare organization and perform our own way of duty. Lastly, The government, community and private social work organization should accomplish cooper ation system among them.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.7-34
• /
• 1994

;Recently the sheet forming simulation technology revealed great progress in the sense of practical application in the automotive, electric/electronics and aviation/space industries. The goal of sheet forming simulation is to embedded in the design engineering system which is consisted by the analysis and synthesis modules. This design simulation system predicts the slackness of sheet and estimate the formability, and search the optimum material/forming/structure conditions. This OVER-ALL OPTIMUM DESIGN can be classified as follow; 1. ANALYZING PROCEDURE: Numerical simulation based on nonlinear theories -geometry, material and friction nonlinearities- 2. OPTIMIZATION PROCEDURE: Optimum design based on mathematical programing and AI technologies, those are implemented in CAD/CAM/CAE System - Concurrent Engineering System-. In this paper, four subjects will be discussed; (1) State of arts of computer simulation technologies in Japan. (2)History of sheet forming simulation. (3) Benchmark problems. (4) Future technology in the sheet forming simulation.ation.