• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.36-44
• /
• 2007

This paper presented a hybrid ternary encoding scheme using 3-valued logic. It can adapt to the delay-insensitive(DI) model. We designed an asynchronous wrapper for the hybrid ternary encoding scheme to communicate with various asynchronous encoding schemes. It reduced about 50% of transmission lines and power consumption compared with the conventional 1-of-4 and ternary encoding scheme. The proposed wrappers were designed and simulated using the $0.18-{\mu}m$ standard CMOS technology. As a result, the asynchronous wrapper operated over 2 GHz communicating with a system bus. Moreover, the power dissipation of the system bus adapted the hybrid ternary encoding logic decreases 65%, 43%, and 36% of the dual-rail, 1-of-4, and ternary encoding scheme, respectively. The proposed data encoding scheme and the wrapper circuit can be useful for asynchronous high-speed and low-power asynchronous interface.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.53-59
• /
• 2017

This Paper Proposes a New High-speed Design Methodology for Delay Insensitive Asynchronous Circuits Combining with a Pseudo-NMOS Structure used for High Performance in Synchronous Circuits. Null Convention Logic(NCL) of Conventional Delay-Insensitive Asynchronous Design Methodologies has many Advantages of High Reliability, Low Power Consumption, and Easy Design Reuses not Dependant on Semiconductor Technology. However. the Conventional NCL Gates has a Complicated Stack Structure, so it Suffers from Increased Circuit Delay. Therefore, a New NCL Gates and its Pipeline Structure for High Performance, and the Proposed Methodology has been Designed and Evaluated by a $4{\times}4$ Multiplier Designed using SK-Hynix 0.18 um CMOS Technology. The Experimental Results are Compared with a Conventional NCL in Terms of Power and Delay and shows that the Propagation Delay of the Proposed Multiplier is Reduced by 85% Compared with the Conventional NCL Multiplier.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.61-74
• /
• 2002

This paper presents a method which synthesizes asynchronous circuits from free-choice Signal Transition Graphs (STGs) with timing constraints. The proposed method synthesizes asynchronous circuits by analyzing: the relations between signal transitions directly from the STGs without generating state graphs. The synthesis procedure decomposes a free-choice STG into deterministic STGs which do not have choice behavior. Then, a timing analysis extracts the timed concurrency and tamed causality relations between any two signal transitions for each deterministic STG. The synthesis procedure synthesizes circuits for each deterministic STG and synthesizes the final circuit by merging the circuits for each deterministic STG. The experimental results show that our method achieves significant reductions in synthesis time for the circuits which have a large state space, and generates circuits that have nearly the same area as compared to previous methods.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.47-55
• /
• 1999

In this paper, a new function hazard elimination algorithm is proposed for asynchronous circuit synthesis. In previous approach, function hazard is eliminated by using state graph which is obtained from the state assignment on STG(signal transition graph) representing transition relationship among signals. These algorithms can use conventional hazard removal and synthesis method applied in synchronous system, but it has much computational complexity and takes much time to handle the state graph. Although some hazard elimination algorithm from STG were proposed, it could not reduce the area overhead due to the addition of new signals. The proposed algorithm eliminate function hazard directly on STG and also control the number of minterms and product-term of added signal in order to minimize the area overhead. Experimental results on benchmark data shows that overall circuit area after hazard elimination is decreased about 15% on the average than that of previous method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.49-55
• /
• 2012

Asynchronous counters, where the counter value is changed not by a synchronizing clock but by outer inputs, are used in various modern digital systems such as spaceborne electronics. In this paper, we propose a scheme of fault tolerance for asynchronous counters with critical races caused by total ionizing dose (TID) in space. As a typical design flaw of asynchronous digital circuits, critical races cause an asynchronous circuit to show non-deterministic behavior, i.e., the next stable state of a state transition is not a fixed value but may be any value of a state set. Using the corrective control scheme for asynchronous sequential machines, this paper provides an existence condition and design procedure for a state feedback controller that can invalidate the effect of critical races. We implement the proposed control system in VHDL code and conduct experiments to demonstrate that the proposed control system can overcome critical races.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.512-517
• /
• 1998

In a matrix converter, input side and output side are coupled with each other through switching elements. Since disturbances on either side affect directly on the other side, it requires a high-speed on-line control system to compensate them. We proposed in previous papers a new control strategy and an on-line control circuit for a matrix converter. The control circuit could keep the output voltage at commanded value against fluctuation in the supply voltage. Furthermore wave forms of the output voltage and the input current were always kept sinusoidal. The switching pattern was generated by comparing modified voltage references with a carrier. The carrier was synchronized with the supply voltage using a PLL system, which made the control circuit complicated and costly. This paper discusses on the possibility of an asynchronized carrier. Experiment results show the input current distortion in case of asynchronous carrier is bigger than that of synchronous carrier. However, the deterioration can be minimized by increased carrier frequency.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2980-2988
• /
• 1998

This paper describes the design of asynchronous adders based on carry selection and carry bypass techniques. The designs are faster than existing asynchronous adders which are based on ripple carry technique. It is caused by reducing the carry transfer time by using carry selection and carry bypass techniques. Also, the design uses tree structure to reduce the completion sensing time. The proposed adders are designed with CMOS domino logic and experimented with HSPICE simulator. Experimental results show that the proposed adders can be faster about 50% in average cases than previous ripple carry adders.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.353-356
• /
• 2002

Due to the increased complexity and size of digital system and the need of the H/W-S/W co-design, C/C++ based system design methodology gains more Interests than ever in EDA field. This paper suggests the methodology in which handshake module corresponding to each basic statement of C is provided of the form of STG(Signal Transition Graph) and then, C statements is synthesized into asynchronous circuit through syntax-oriented translation. The 4-phase handshaking protocol is used for the communications between modules, and the modules are synthesized by the Petrify which is asynchronous logic synthesis CAD tool.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.118-123
• /
• 2020

In this paper, the design method of asynchronous nonvolatile memory module that can efficiently process and store large amounts of data without loss when the power turned off is proposed and implemented. PSRAM, which takes advantage of DRAM and SRAM, was used for data processing, and NAND flash memory was used for data storage and backup. The problem of a lot of signal interference due to the characteristics of memory devices was solved through PCB design using high-density integration technology. In addition, a boost circuit using the super capacitor of 0.47F was designed to supply sufficient power to the system during the time to back up data when the power is off. As a result, an asynchronous nonvolatile memory module was designed and implemented that guarantees reliability and stability and can semi-permanently store data for about 10 years. The proposed method solved the problem of frequent data loss in industrial sites and presented the possibility of commercialization by providing convenience to users and managers.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.82-87
• /
• 2001

In this paper we described the generation method of interface logic which can be replace between IP and IP handshaking signal with asynchronous logic circuit. Especially, we suggest the new \"Waveform Conversion Algorithm : Wave2VHDL\", if only mixed asynchronous timing waveform suggested which level type input and pulse type input for handshaking, we can convert waveform to flowchart and then replaced with VHDL code according to converted flowchart. Also, we assure that asynchronous electronic circuits for IP interface are generated by applying extracted VHDL source code from suggested algorithm to conventional domestic/abroad CAD Tool, and then we proved that coincidence simulation result and suggested timing diagram.g diagram.