• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1181-1188
• /
• 2021

When abnormal events occur in a nuclear power plant, operators must conduct appropriate abnormal operating procedures. It is burdensome though for operators to choose the appropriate procedure considering the numerous main plant parameters and hundreds of alarms that should be judged in a short time. Recently, various research has applied deep-learning algorithms to support this problem by classifying each abnormal condition with high accuracy. Most of these models are trained with simulator data because of a lack of plant data for abnormal states, and as such, developed models may not have tolerance for plant data in actual situations. In this study, two approaches are investigated for a deep-learning model trained with simulator data to overcome the performance degradation caused by noise in actual plant data. First, a preprocessing method using several filters was employed to smooth the test data noise, and second, a data augmentation method was applied to increase the acceptability of the untrained data. Results of this study confirm that the combination of these two approaches can enable high model performance even in the presence of noisy data as in real plants.

• Journal of Appropriate Technology
• /
• v.5 no.1
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.114-117
• /
• 2019

Ethiopia becomes a leading country in Africa as she possesses two 1 m telescopes which are unique in East Africa. Building the telescopes evoked people's interest on Astronomy and Space, and the passion is continued to space development and founding a large telescope. Ethiopia Space Science and Technology Institute was established, Adama Science and Technology University and other universities get in education and research & development (ERD). In this paper, status of Astronomy and Space science in Ethiopia is reviewed and collaboration prospect is studied.

• The Journal of Information Technology
• /
• v.10 no.3
• /
• pp.1-14
• /
• 2007

We have studied the methods to connect homes with a digital network and apply home automation to education. We presented the possibility of integrated education where public education at school can be extended to home. The hardwares related with home automation are continuously in development. We have demonstrated the materials appropriate for the levels of individual students with home network information, and studied methods of education.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.5
• /
• pp.12-24
• /
• 2008

With recent emphasis on the creation of environment-friendly new towns, introduction of ecological facilities for habitation and migration of wild animal's species is requested when developing new towns. In order to introduce such facilities, building an eco-network within the site based on the connectivity of the source area and habitats is essential in new town development. Therefore, this study mainly aimed at selecting species targeted for building an eco-network in Pangyo new town, which is intended to be an environment-friendly city. Therefore, criteria for selecting target species were generated. Then, species observed within the site through field surveys and literature review was evaluated based on the selection criteria and items. By totaling the score, a list of appropriate targeted species was finalized. Among species surveyed and observed in the site, appropriate target species that may be selected for Pangyo new town's eco-network include Falco tinnunculus interstinctus, Accipiter soloensis, Picus canus, Paradoxornis webbiana, Parus palustris, Parus ater, Parus major and Passer montanus Egretta in birds, Asiatic chipmunk, Nyctereutes procyonoides in mammals. For Pangyo new town, it is essential to create living environment and build a network for major wild animal species within the site based on target species. This will play a crucial role in building a reasonable ecological network enabling harmonious co-existence between mankind and nature. In order to build an ecological network successfully, follow-up studies need to be conducted on restoration technology and methods required for creating habitats appropriate to target species.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.2
• /
• pp.25-36
• /
• 2020

The Korean government has a plan to mandate zero-energy buildings in 2020 for public and 2025 for private buildings. In order to design a zero-energy building, insulation and airtightness, which are the most basic elements of passive house technology, are required, and the government has been accomplished this through step-by-step strengthening of related standards. In passive house with high thermal insulation and airtightness performance, the heat introduced into the building through solar radiation can be stored for a long time to keep the inside warm during winter. On the other hand, during summer, heat introduced into the building cannot be easily released to outside, so it is necessary to actively block solar radiation and high temperature outdoor air to prevent an increase of indoor temperature. Therefore, this study aims to derive an appropriate operation condition of passive house to maintain the indoor temperature at an suitable level according to the ventilation methods and solar shading conditions. As a result, under the conditions that the outdoor temperature was 28℃ or less, the ventilation using a heat recovery ventilation system at daytime and natural ventilation at nighttime were selected for the most appropriate operation method. In addition, in the case of solar shading, it was found that blocking solar radiation at daytime using the blind and open the blind at nighttime to ensure natural ventilation were selected for the most appropriate solar shading condition.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

This paper presents a novel user interface system which aims at easy controlling of mobile devices. The fundamental concept of the proposed interface is to launch an appropriate function of the device by sensing and recognizing the grip-pattern when the user tries to use the mobile device. To this end, we develop a prototype system which employs capacitive touch sensors covering the housing of the system and a recognition algorithm for offering the appropriate function which suitable for the sensed grip-pattern. The effectiveness and feasibility of the proposed method is evaluated through the test of recognition rate with the collected grip-pattern database.

• The Korean Journal of Emergency Medical Services
• /
• v.10 no.3
• /
• pp.61-70
• /
• 2006

Purpose: The purpose of this study is to develop a realistic illustration using watercolors on a complete airway obstruction maneuver that is at an appropriate level for elementary school students from the first grade through the third. The illustration is a series of cuts divided into specific frames designed to illustrate the method to be followed in an action or a practical skill that would otherwise be too difficult to explain in written form. Methods: The fundamental theory of the Jeong In-Sung's instruction learning program based on the WEB to construct an appropriate site of instruction learning was used after modification. In this study analysis, design, and production stages were realized. Results: 1. In Stage 1, impressions of the illustration, in sketch form, were received. In Stage 2, results of impressions from a modified illustration were received. After an appropriate level of understanding and accuracy in the practical steps for emergency maneuvers were achieved the illustrations entering Stage 3 and color was added to the sketches. 2. In Stage 3, the illustration was completed by adding color to the contents for the practical steps in the complete airway obstruction maneuver. 3. For composition evaluation, a result of 100% appropriateness was obtained for both items of harmony between illustration and subject being studied and sufficiency in quantity of illustrations. Also high results for appropriateness in items such as clarity, creating interest, illustration size, and tone preference as related to content were achieved and thus completed the production stages. Conclusion: The Complete Airway Obstruction Maneuver Illustration developed specifically for the characteristics and cognitive level of elementary school students grade 1 through grade 3 was appropriate for teaching and learning. There is a need for future research on developed illustrations aimed at elementary school students grade 1 through 3 on the complete airway obstruction maneuver. There is also a need for continued effort in developing certified evaluating tools that can judge the suitability of illustrations and developing illustrations related to emergency maneuvers for various subjects and appropriate for learner level.

• Korean Management Science Review
• /
• v.28 no.2
• /
• pp.63-74
• /
• 2011

As business environment has become more competitive, the R&D strategies of firms have been regarded more important. Patent has information about technology which affects a firm's profit and it is considered as resources which have provided appropriate data for research of innovations and trends in technology. And patent indicators are known as qualitative representation of technology quality in an objective view. Also, they are available for the continuous and systematic analysis. However, most previous studies have focused on developing patent indicators to investigate patent value and characteristics. Furthermore they have limitations that most results is not significant that patent indicators have effect on firm performance-Tobin's q, Intangible assets based on balance sheet, sales and etc. Thus, the purpose of this paper is to propose proper a factor to represent a firm performance and to analyze causal relationship between patent indicators and firm performance. Intangible assets based on market value are employed as one of most significant firm performance indicator. The results indicate that intangible assets are appropriate for analyzing causal relation between patent and a firm performance with 7 significant indicators among 10 patent indicators. Considering firm's exogenous factors, regression analysis of each data for five years is performed. This result is similar to regression analysis of full data for all years.

• Journal of Korea Foundry Society
• /
• v.36 no.6
• /
• pp.208-214
• /
• 2016

Casting defects, which are closely related to entrapped air bubbles and metallic oxides, occur very frequently in the casting process. Many researchers have shown that these defects can be reduced by adopting an appropriate gating system design. But, it is difficult for field engineers to identify a specific gating system that is more appropriate for their products. In this study, we tried to draw a comparison of gating system designs with and without ceramic foam filters. A ceramic foam filter was added to the horizontal runner just after the sprue to prevent air bubble generation and to reduce turbulence without change of the gating system design. To verify the effects of initial pouring velocity, the experiment was conducted with four different amounts of water volume in the reservoir. Results of the water modeling experiment applying the filter showed remarkably changed flow characteristics. Although the study confirmed that use of the filter may change the flow characteristics, it needs to be noted that only filter use alone cannot solve all the problems caused by a poorly designed gating system.