• 한국의류학회지
• /
• 제21권1호
• /
• pp.170-181
• /
• 1997

The purpose of this study was to determine the effect of knit structure and knit density (machine tightness factor) on the dimensional properties and K1-4 values of weft-knitted fabrics followed over eleven cycles of mechanical relaxation to provide the basic data for constructing weft-knitted fabrics for outwear with excellent dimensional stability The eighteenth weft-knitted fabrics were produced with different knit structure (1$\times$1 rib, half-cardigan rib, half-milano rib, interlock, single pique, crossmiss interlock) and machine tightness factor (loose, medium, tight) for this study. Dimensional properties such as width, lengh, area shrinkage and dimensional parameter (K) of eighteenth knitted fabrics including thickness and bulk property were measured. The results were as follows; 1. The dimensional behavior of the Ix1 rib and interlock in relaxation cycles was anisotropic, i.e., length shrinkage was usually associated with a width expansion, whereas the other weft-kntted fabrics which have tuck or miss loops in the knit structure behaved isotropically, i.e., length and width shrinkages were usually found. It was proposed that the difference in dimensional behavior between these structures was due to the dissimilar nonrelaxed geometrical shapes of the individual structural units forming these weft-knitted structures. The mechanical relaxation shrinkage of weft-knitted cotton fabrics was dependent on the tightness of construction. For a range of fabrics knitted on this study, an increase in fabric tightness caused a decrease in the length shrinkage of the fabric accompanied by an increase in its width shrinkage.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.265-271
• /
• 2008

TCP(Tape Carrier Package), COG (Chip On Glass), COF(Chip On Film) are three methods for connecting LDI(LCD Driver IC) with LCD panels. Especially COF is growing its portion of market place because of low cost and fine pitch correspondence. But COF has a problem of the lead broken failure in LCD module process and the usage of customer. During PCB (Printed Circuit Board) bonding process, the mismatch of the coefficient of thermal expansion between PCB and D-IC makes stress-concentration in COF lead, and also D-IC bending process during module assembly process makes the level of stress in COF lead higher. As an affecting factors of lead-broken failure, the effects of SR(Solder Resister) coating on the COF lead, surface roughness and grain size of COF lead, PI(Polyimide) film thickness, lead width and the ACF(Anisotropic Conductive Film) overlap were studied, The optimization of these affecting manufacturing processes and materials were suggested and verified to prevent the lead-broken failure.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.263-272
• /
• 2014

Scattering source calculations using conventional spherical harmonic expansion may require lots of computation time to treat full-coupled three-dimensional photon-electron transport in a highly anisotropic scattering medium where their scattering cross sections should be expanded with very high order (e.g., $P_7$ or higher) Legendre expansions. In this paper, we introduce a modified scattering kernel approach to avoid the unnecessarily repeated calculations involved with the scattering source calculation, and used it with parallel computing to effectively reduce the computation time. Its computational efficiency was tested for three-dimensional full-coupled photon-electron transport problems using our computer program which solves the multi-group discrete ordinates transport equation by using the discontinuous finite element method with unstructured tetrahedral meshes for complicated geometrical problems. The numerical tests show that we can improve speed up to 17~42 times for the elapsed time per iteration using the modified scattering kernel, not only in the single CPU calculation but also in the parallel computing with several CPUs.

• 한국통신학회논문지
• /
• 제15권3호
• /
• pp.252-259
• /
• 1990

本 論文은 기존 LOCOS工程의 張點을 모두 겸비한 側面璧 SWAMI 技術에 대한 새로운 構造를 提示한다. 새로운 SWAMI공정은 순수 窒化膜 壓力과 體積 膨腸에 기인한 壓力을 크게 줄이기 위해서 側面璧 주위에 얇은 질화막과 反應性이온 飾刻으로 기울어진 실리콘 측면벽을 結合시켰따. 製作된 結果에 의하면, 缺陷이 없는 완전히 새부리 모양이 形成되지 않는 局地的 酸化 공정은 기울어진 面의 異方性 산화 隔離에 의해 實現시킬 수 있었다. 추가적인 마스크 段階는 要求되지 않는다. 이 工程에서 PN 다이오드의 漏泄電流는 기존 LOCOS 공정 보다 減少되었다. 한편 가장자리 部位는 漏泄電流 密度에서 평편한 接合 부위 보다 높게 分析되었다.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.484-490
• /
• 2021

Instrumented indentation testing has been widely used for residual stress measurement. The Knoop indentation is mainly selected for determining anisotropic mechanical properties and non-equibiaxial residual stress. However, the measurement of equibiaxial stress state and compressive residual stress on a specimen surface using Knoop indentation is neither fully comprehended nor unavailable. In this study, we investigated stress conversion factors for measuring Knoop indentation on equibiaxial stress state through indentation depth using finite element analysis. Knoop indentation was conducted for specimens to determine tensile and compressive equibiaxial residual stress. Both were found to be increased proportionally according to indentation depth. The stress field beneath the indenter during each indentation test was also analyzed. Compressive residual stress suppressed the in-plane expansion of stress field during indentation. In contrast, stress fields beneath the indenter developed diagonally downward for tensile residual stress. Furthermore, differences between trends of stress fields at long and short axes of Knoop indenter were observed due to difference in indenting angles and the projected area of plastic zone that was exposed to residual stress.

• 천문학회보
• /
• 제46권2호
• /
• pp.36.1-37
• /
• 2021

Six images of IRC+10216 taken by the Hubble Space Telescope at three epochs in 2001, 2011, and 2016 are compared in the rest frame of the central carbon star. An accurate astrometry has been achieved with the help of Gaia Data Release 2. The positions of the carbon star in the individual epochs are determined using its known proper motion, defining the rest frame of the star. In 2016, a local brightness peak with compact and red nature is detected at the stellar position. A comparison of the color maps between 2016 and 2011 epochs reveals that the reddest spot moved along with the star, suggesting a possibility of its being the dusty material surrounding the carbon star. Relatively red, ambient region is distributed in an Ω shape and well corresponds to the dusty disk previously suggested based on near-infrared polarization observations. In a larger scale, differential proper motion of multiple ring-like pattern in the rest frame of the star is used to derive the average expansion velocity of transverse wind components, resulting in ~12.5 km s-1 (d/123 pc), where d is the distance to IRC+10216. Three dimensional geometry is implied from its comparison with the line-of-sight wind velocity determined from half-widths of submillimeter emission line profiles of abundant molecules. Uneven temporal variations in brightness for different searchlight beams and anisotropic distribution of extended halo are revisited in the context of the stellar light illumination through a porous envelope with postulated longer-term variations for a period of 10 years.

• 한국지반신소재학회논문집
• /
• 제14권1호
• /
• pp.11-21
• /
• 2015

본 연구는 대상형 하중이 작용하는 기초지반의 고유이방성에 대한 거동특성을 파악하기 위하여 시화지구 해성점토를 이용하여 일반삼축압축시험과 수평방향의 변형만을 허용하고 중간주응력(${\sigma}_2$) 방향의 변형률(${\varepsilon}_2$)을 0으로 하는 평면변형률 압축 및 신장시험을 실시하였다. 또한 일련의 시험결과에 의해 해석에 필요한 토질매개변수를 결정하였다. 그리고 대상하중이 작용하는 기초지반에 대하여 탄 소성 구성모델 중 자연퇴적점토의 거동특성을 가장 적절하게 설명할 수 있는 Cam-clay 모델을 적용하여 일반삼축압축시험 및 평면변형률시험 조건일 경우에 대하여 수치해석을 실시하였다. 해석결과 연직변위는 평면변형률 압축시험이 일반삼축압축시험에 비하여 18~25% 정도 변위가 크게 발생하였으며, 수평변위도 13~19% 정도 변위가 크게 발생하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.498-502
• /
• 2010

Aluminium titanate($Al_2TiO_5$) has extremely anisotropic thermal expansion properties in single crystals, and polycrystalline material spontaneously microcracks in the cooling step after sintering process. These fine intergranular cracks limit the strength of the material, but provide an effective mechanism for absorbing strain energy during thermal shock and preventing catastrophic crack propagation. Furthermore, since machinable BN-ceramics used as an insulating substrate in current micro-electronic industry are very expensive, the development of new low-cost machinable substrate ceramics are consistently required. Therefore, cheap $Al_2TiO_5$-machinable ceramics was studied for the replacement of BN ceramics. $Al_2O_3-Al_2TiO_5$ ceramic composite was fabricated via in-situ reaction sintering. $Al_2O_3$ and $TiO_2$ powders were mixed with various mol-ratio and sintered at 1400 to $1600^{\circ}C$ for 1 h. Density, hardness and strength of sintered ceramics were systematically measured. Phase analysis and microstructures were observed by XRD and SEM, respectively. Machinability of each specimens was tested by micro-hole machining. The results of research showed that the $Al_2TiO_5$-composites could be used for low-cost machinable ceramics.

• 한국방사선학회논문지
• /
• 제2권1호
• /
• pp.23-29
• /
• 2008

본 연구에서는 웨이블릿 변환과 경계선 검출 필터를 이용하여 초음파영상의 다해상도 분해를 한 후 경계선 검출 필터링을 통해 초음파 영상의 화질을 개선하는 방안을 제안하였다. 제안된 방법에서는 잡음을 줄이고 에지를 강화하기 위해 웨이블릿 변환된 영상으로부터 얻어진 저해상도 영상에서 고해상도 영상으로 단계적으로 영역별 선택계수 조정과 방향성을 고려한 에지 필터링을 수행하였다. 이를 통해 반점영역의 픽셀은 웨이블릿 계수를 줄여 에지를 제외한 영역에서 선택적 저역통과 필터링 효과를 만들고, 에지에서는 접선 방향으로 평활화를 하여 연속성을 향상시키고, 법선 방향으로는 세선화를 하여 contrast를 높였다. 실험을 통해 단일해상도에서 비선형적 이방성의 확산모델을 이용한 필터링 방법과 웨이블릿 수축구조를 이용한 필터링 방법에 대해 비교하였다.

• 한국강구조학회 논문집
• /
• 제10권2호통권35호
• /
• pp.201-209
• /
• 1998

강섬유보강 적층복합구조물에서 온도의 변화는 구조물의 응답에 중요한 영향을 미칠수 있다. 온도의 급작스런 변화는 재료의 강도와 성질을 현저히 저하시켜 구조물의 대변형, 좌굴, 고응력상태를 유발하는 중요한 인자가 된다. 본 연구에서는 등분포로 재하된 온도하중에 의한 적층복합판의 온도좌굴에 관한 해석을 수행하였다. 전단변형의 효과를 정확히 고려하기위해 5개의 변수로 구성된 고차전단변형이론을 적용하였다. 적층판의 배열각도, 적층판의 수, 폭-두께비의 변화, 형상비의 변화에 따른 임계좌굴온도를 구하여 1차전단변형이론에 의한 결과와 고전적이론에 의한 결과와 비교분석하였다.