• 전기의세계
• /
• v.28 no.4
• /
• pp.53-63
• /
• 1979

Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.247-255
• /
• 2009

This study examined the quality characteristics of brown sauce prepared with rice powder in place of wheat flour, which is the commonly used thickener. With regard to the general components, as the level of rice powder increased and its ratio in the stock increased, moisture decreased and crude protein, lipid, and ash increased. Reducing sugar content was 4.72% in the control group, and as the mixing ratio of stock to rice powder increased from 100:5 (S1) to 100:13 (S5) in the rice powder-added groups, reducing sugar content increased from 3.94% to 4.82%, respectively. In terms of Hunter's color values, as more rice power was added to the beurre mani$\acute{e}$, L, a, and b values increased. Thus, a sauce of a light brown color was appropriately made. For consistency, as more rice powder beurre mani? was inserted into the analyzer, flow was reduced and viscosity significantly increased. The pH of the control (CS) was 4.94, and there were no significant differences between the control and the rice powder-added groups. In sensory evaluations, color presented its highest score as 6.47 when the mixing ratio of stock to beurre mani$\acute{e}$ was 100:7 (S2). S2 also received the highest score for flavor at 6.32. Viscosity was highest in the control (CS) at 6.26, and was not significantly different from the 100:7 (S2) or 100:9 (S3) groups. Finally, the S2 group had the highest scores for taste (6.21) and overall-acceptability (6.30). In correlation analyses between the sensory characteristics, overall-acceptability as well as the color, flavor, viscosity, and taste of the brown sauce all presented comparatively high positive correlations, in which overall-acceptability and color had the highest correlation.

• Electronics and Telecommunications Trends
• /
• v.24 no.1
• /
• pp.32-42
• /
• 2009

최근 높은 대역폭을 요구하는 애플리케이션이 증가하면서 10G 이더넷이 활발히 도입되고 있으나, 트래픽의 집중화가 계속 진행되고 있어서 더욱 큰 대역폭을 제공할 수 있는 100G급 이더넷 기술이 요구되고 있다. 100G 이더넷은 단거리 서버 환경을 지원하는 40G 이더넷과 함께 IEEE 802.3에서 표준화를 진행하고 있으며 2010년 완료를 목표로 하고 있다. 그리고 ITU-T SG15에서는 100G급 OTN 신호에 대한 논의가 활발히 진행되고 있다. 본 고에서는 40G/100G 이더넷 표준화 동향과 이슈들에 대해 살펴보고, 관련 MAC/PHY 기술과 OTN 전송 기술에 대해 살펴 본다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.54-63
• /
• 2006

This work proposes a 14b 100MS/s 0.18um CMOS ADC with optimized resolution, conversion speed, die area, and power dissipation to obtain the performance required in the fourth-generation mobile communication systems. The 3-stage pipeline ADC, whose optimized architecture is analyzed and verified with behavioral model simulations, employs a wide-band low-noise SHA to achieve a 14b level ENOB at the Nyquist input frequency, 3-D fully symmetric layout techniques to minimize capacitor mismatch in two MDACs, and a back-end 6b flash ADC based on open-loop offset sampling and interpolation to obtain 6b accuracy and small chip area at 100MS/s. The prototype ADC implemented in a 0.18um CMOS process shows the measured DNL and INL of maximum 1.03LSB and 5.47LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 59dB and 72dB, respectively, and a power consumption of 145mW at 100MS/s and 1.8V. The occupied active die area is $3.4mm^2$.

• Advances in Traditional Medicine
• /
• v.7 no.4
• /
• pp.409-417
• /
• 2007

We investigated the effect of Arogh, a polyherbal formulation (PHF) on animal models of anxiety based on exploratory behavior. The anxiolytic activity of polyherbal formulation (30, 100, 300 and 500 mg/kg) was studied using various behavioural paradigms such as elevated plus maze (EPM), light/dark apparatus (LDA), open field apparatus (OFA), hole board apparatus (HBA). Diazepam (1 mg/kg) was used as a standard anxiolytic drug. The effect of PHF (100 and 300 mg/kg) on serotonin, dopamine and noradrenaline mediated behaviour was studied by lithium induced head twitches in rats, haloperidol induced catalepsy in mice and clonidine induced hypothermia in rats respectively. In EPM, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the time spent in open arms and the number of entries in open arms. In LDA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the time spent in lit zone. In OFA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the number of assisted rearing and the number of squares traversed. In HBA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the number of head poking. In lithium induced head twitches, PHF (100 and 300 mg/kg) significantly (P < 0.05) decreased the number of head twitches. In haloperidol induced catalepsy, PHF (300 mg/kg) decreased the duration of catalepsy significantly (P < 0.05) at 60 min. In clonidine-induced hypothermia, PHF (300 mg/kg) did not modify the effect. Drugs must be carefully assessed on EPM test and therefore in the present study EPM is supported by other tests. Present study indicates that Arogh, a polyherbal formulation possess anxiolytic activity. It diminished serotonergic transmission and decreased the duration of catalepsy indicating potentiation of dopaminergic transmission. Thus, Arogh a polyherbal formulation contains bioactive principles which possess anxiolytic activity and modified 5-HT and DA mediated behaviour.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.89-91
• /
• 2018

연안에서 12해리 밖의 배타적 경제수역을 포함하는 공해에서의 해저지명은 기구나 국가에서 지명 심의 제안을 IHO 산하 해저지명소위원회(SCUFN)에 요청하여 채택이 되면 정식 국제해저지명으로 인정받게 되고 해도 및 각종 지명자료에도 활용된다. 해저지명은 종종 영유권 주장의 근거로 활용되기 때문에 공해를 탐사하고 해저지명을 제안하여 채택하는 것은 국가적 차원에서도 중요한 일이다. 국가간 갈등 및 지역간 갈등을 유발할 수 있는 지명에 대한 제안 양식이 존재하지만, 제안자의 자유 기입 측면이 강해서 지명의 제안과 승인 및 적용을 위한 데이터베이스 관리의 어려움이 존재한다. 또한 지명 제안의 근거가 되는 각종 과학적 자료의 보존과 활용에도 제약이 크다. 본 연구에서는 해저지명에 대한 표준 마련의 일환으로 현재의 해저지명 관리 현황을 분석하고 S-100 기반의 해저지명 데이터 모델을 구축하였으며 그 결과 지명 분류를 고려한 데이터 모델의 초안을 완성하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.484-489
• /
• 2004

Isolation of phycobiliprotein from S. platensis was performed by using $30-60{\%}$ ammomium sulfate fractionation, Sephadex G-100 gel filtration and DEAE-Sephacel anionic exchange chromatography. Isolated phycobiliprotein was determined to be a c-phycocyanin with a maximum absorption wavelength at 620 nm. This phycobiliprotein consisted of $({\alpha}$ and $({\beta}$ subunit when analyzed through SDS-PAGE. The molecular weights of $({\alpha}$ and $({\beta}$ subunit were 14.5 kDa and 16 kDa, respectively. The native molecular weight of phycobiliprotein through gel filtration was about 100 kDa. These results show that the structure of phycobiliprotein from S. platensis might be aggregated form of $({\alpha}{\beta})_{3}-trimer$.

• International Commerce and Information Review
• /
• v.3 no.2
• /
• pp.261-280
• /
• 2001

From the IMF(International Monetary fund) crisis, the management conditions of the trading company which run business in world market, has rapidly changed. In particular, the trading conglomerate's competitive power have declined. This study, addressing such changes, intend to analyze what factors are that have generated this changes in trading conglomerate's environment. The study specifically takes it into account that the differences between Korea trading company and Japan's. This research was confirmed by data and field survey in two country. The results of research are summarized as follow. The Korean trading company are inferior to the Japanese trading company in total volume(Korea: 24.1, Japan 100), the benefit volume(Korea: 8.7, Japan 100), the stability of turnover(Korea: 36.6, Japan 100), the network power in foreign country(Korea: 19.2, Japan 100), the power of e-business(Korea: 17.0, Japan 100). But the debt ratio of Korea company is significantly lower than that of Japan's(Korea: 160.4%, Japan 940.5%). In conclusion, providing that the Korean trading company want to be a world-class champion in trading field, they have to introduce the new management strategies which means the high-profit base trading, the long term investment and the internet business.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.1
• /
• pp.49-56
• /
• 1992

This study was carried out to investigate the mechanical behaviour of the plate on a Winkler's foundation according to the soil-structures relative stiffness and the applicability of the conventional analysis method. For the above purpose, Winkler's constant of 4, 15, 25 and 100kg/$cm^2$/cm was considered and the plate thickness of 20, 30, 50, 100 and 150cm was adopted. Results obtained from the numerical examples are summarized as follow: 1. The effects of elastic foundation is considerable for plates with small flexural rigidity. 2. As the Winkler's constant increases, the bending moment in the plate becomes localized near the loading point. 3. The stresses evaluated by the conventional method not correct even for rigid ground such as rock. 4. If the relative stiffness of the plate is very large, for example the plate thickness is larger than 100cm, the conventional analysis method can be justified for the design purposes. 5. On assumption the flexural rigidity of the plate is infinite, the interaction of soil and plate can be ignored in design consideration. The numerical examples in this paper show that when the plate thickness is more than 100cm, the effects of elastic foundation almost disappear. In practical design, soil-plate interaction should be taken into account, because the 100cm-thickness of the plate will not be practical value in usual sites.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.53-63
• /
• 2009

This work proposes a 10b 100MS/s 27.2mW $0.8mm^2$ 0.18um CMOS ADC for WLAN such as an IEEE 802.11n standard. The proposed ADC employs a three-stage pipeline architecture and minimizes power consumption and chip area by sharing as many circuits as possible. Two multiplying DACs share a single amplifier without MOS switches connected in series while the shared amplifier does not show a conventional memory effect. All three flash ADCs use only one resistor ladder while the second and third flash ADCs share all pre-amps to further reduce power consumption and chip area. The interpolation circuit employed in the flash ADCs halves the required number of pre-amps and an input-output isolated dynamic latch reduces the increased kickback noise caused by the pre-amp sharing. The prototype ADC implemented in a 0.18um n-well 1P6M CMOS process shows the DNL and INL within 0.83LSB and 1.52LSB at 10b, respectively. The ADC measures an SNDR of 52.1dB and an SFDR of 67.6dB at a sampling rate of 100MS/s. The ADC with an active die area of $0.8mm^2$ consumes 27.2mW at 1.8V and 100MS/s.