• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1254-1259
• /
• 2008

A new CMOS current-mode integrator for low-voltage analog integrated circuit design is presented. The proposed current-mode integrator is based on cross-coupled gain-boosting topology. When it is compared with that of the typical current-mirror type current-mode integrator, the proposed current-mode integrator achieves high current gain and unity gain frequency with the same transistor size. As a application circuit of the proposed integrator, we designed the 1.8V 200MHz band current-mode lowpass filter. These are verified by Hspice simulation using $0.18{\mu}m$ CMOS technology.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.260-264
• /
• 2008

In this paper, a dual mode baseband analog channel selection filter is described which is designed for the Bluetooth and WCDMA wireless communications. Using the presented current-mode integrator, a dual mode channel selection filter is designed. To verify the current-mode integrator circuit, Hspice simulation using 1.8V Hynix $0.18{\mu}m$ standard CMOS technology was performed and achieved $50.0{\sim}4.3dB$ gain, $2.29{\sim}10.3MHz$ unity gain frequency. The described third-order dual mode analog channel selection filter is composed of the current-mode integrator, and used SFG(Signal Flow Graph) method. The simulated results show 0.51, 2.40MHz cutoff frequency which is suitable for the Bluetooth and WCDMA baseband block each.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.115-119
• /
• 2022

A readout circuit for a mercury-cadmium-telluride (MCT)-amplified mid-wave infrared (IR) photodetector was realized and applied to noncontact chemical agent detectors based on a quantum cascade laser (QCL). The QCL emitted 250 times for each wavelength in 0.2-㎛ steps from 8 to 12 ㎛ with a frequency of 100 kHz and duty ratio of 10%. Because of the nonconstant QCL emission power during on-duty, averaging the photodetector signals is essential. Averaging can be performed in digital back-end processing through a high-speed analog-to-digital converter (ADC) or in analog front-end processing through an integrator circuit. In addition, it should be considered that the 250 IR data points should be completely transferred to a PC during each wavelength tuning period of the QCL. To average and minimize the IR data, we designed a readout circuit using the analog front-end processing method. The proposed readout circuit consisted of a switched-capacitor integrator, voltage level shifter, relatively low-speed analog-to-digital converter, and micro-control unit. We confirmed that the MCT photodetector signal according to the QCL source can be accurately read and transferred to the PC without omissions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.158.4-158
• /
• 2001

This paper presents a novel circuit configuration for realizing the continuous-time active-only voltage-mode integrator. The proposed integrator consists only of internally compensated type operational amplifier (OA) and operational transconductance amplifiers (OTAs). Since no external passive elements are required, the integrator is suitable for integrated circuit implementation in either bipolar or CMOS technologies. Moreover, the integrator gain can be electronically tuned by adjusting the bias currents of the OTAs. The characteristics of the proposed integrator and the effectiveness of the design procedure in realizing various analog transfer functions have been examined by PSPICE simulation.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.14-18
• /
• 1997

A design methodology of the analog current-mode and width programmable integrator for a low voltage (3V) and low power application is developed and the integrator designed by this method is successfully fabricated by the 0.8$\mu\textrm{m}$ CMOS n-well single poly/double metal standard digital process. The integrator occupies the active chip area of 0.3$\textrm{mm}^2$. The experimental result illustrates a low power dissipation (1.0mW∼3.55 mW), 65dB of the dynamic range, and digitally and width programmability (10MHz∼30MHz) with an external digital 4 bit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1619-1626
• /
• 2021

Unlike traditional delta-sigma analog-to-digital converters, incremental analog-to-digital converters enable 1:1 mapping of input and output through a reset operation, which can be used very easily for multiplexing. Incremental analog-to-digital converters also allow for simpler digital filter designs compared to traditional delta-sigma converters. Therefore, starting with analysis in the time domain of the delayed integrator and non-delayed integrator, which are the basic blocks of analog-to-digital converter design, the design equations of a second-order input feed-forward, extended counting, 2+1 MASH (Multi-stAge-noise-SHaping), 2+2 MASH incremental analog-to-digital converter are derived in this paper. This allows not only prediction of the performance of the incremental analog-to-digital converter before design, but also the design of a digital filter suitable for each analog-to-digital converter. In addition, extended counting and MASH design techniques were proposed to improve the accuracy of analog-to-digital converters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1726-1733
• /
• 1996

A 3V-50MHz analog CMOS continuous-time current-mode filter with a negative resistance load(NRL) is proposed. In order to design a current-mode current integrator, a modified basic current mirror with a NRL to increase the output resistance is employed. the inherent circuit structure of the designed NRL current integrator, which minimizes the internal circuit nodes and enhances the gain bandwidth product, is capable of making the filter operate at the high frequency. The third order Butterworth low pass filter utilizing the designed NRL current integrator is synthesized and simulated with a 1.5.mu.m CMOS n-well proess. Simulation result shows the cutoff frequency of 50MHz and power consumption of 2.4mW/pole with a 3V power supply.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.381-389
• /
• 2004

In this paper, it is suggested that instantaneous compensation PWM control for inverter without the smoothing capacitor Therefore, this inverter system has several advantages. It has small volume and low price to manufacture, decrease trouble rate of inverter, and has power factor correction effect because huge smoothing capacitor-less. And it has compact size control circuit to use analog integrator device. It could make the smoothing capacitor-less inverter for air-blower motor by using the instantaneous compensation PWM controller. This inverter system has small volume and value compare with the conventional VVVF control inverter.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.786-792
• /
• 2018

A third-order sigma-delta modulator with the architecture of cascade of integrator feedback (CIFB) is proposed for an analog-digital converter used in low-power sensor interfaces. It consists of three switched-capacitor integrators using a gain-enhanced current-mirror-based amplifier, a single-bit comparator, and a non-overlapped clock generator. The proposed sigma-delta analog modulator with over-sampling ratio of 160 and maximum SNR of 90.45 dB is implemented using $0.11-{\mu}m$ CMOS process with 1.2-V supply voltage. The area and power consumption of the sigma-delta analog modulator are $0.145mm^2$ and $341{\mu}W$, respectively.