• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1995

The optical behavior of coloring matter extracted from onion's coats, the depression effects of destruction, yellowing and W transmittance of silk treated with color solution of onion's coats color difference of silk fabrics dyed with acid dyes and drycleaning fastness of silk treated with color solution has been investigated. The results are as follows : 1) The coloring matter extracted from onion's coats by alkali-acid method appeared properties of aglycon type. 2) &{\lambda}_{max}&of color solution extracted by distilled water was found at 280 and 327nm. 3) The decrease of tensile strength and the elongation of the silk treated with color solution were depressed but those of untreated silk were increased by irradiation of UV light. 4) The yellowness index of silk treated with color solution showed a little change by irradiation. 5) The UV transmittance of silk treated with color solution was decreased as increasing concentration of color solution. 6) The color difference after dyeing with several acid dyes on treated and untreated silk fabrics showed remarkable changes. 7) Drycleaning fastness of silk treated by color solution was excellent.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.2
• /
• pp.85-93
• /
• 2013

This study has been carried out to elucidate the characteristics of the dissolution for Thermal Decomposed Solid Waste of uranium-bearing sludge (TDSW), the removal of impurities by an alkalization in a nitric acid dissolving solution of TDSW, and the selective removal (/recovery) of uranium by an acidification in an carbonate alkali solution, respectively. TDSW generated by thermal decomposition of U-bearing sludge which was produced in the uranium conversion plant operation, was stored in KAERI as a solid-powder type. It is found that the dissolution of TDSW is more effective in nitric acid dissolution than oxidative-dissolution with carbonate. At 1 M nitric acid solution, TDSW was undissolved about 30wt% as a solid residue, and uranium contained in TDSW was dissolved more than 99%. In order to the alkalization for the nitric acid dissolving solution of TDSW, carbonate alkalization is more effective with respect to remove the impurities. At the carbonate alkali solution controlled to about 9 of pH, Al, Ca, Fe and Zn co-dissolved with U in dissolution step was removed about $98{\pm}1%$. On the other hand, U could be recovered more than 99% by an acidification at pH about 3 in a carbonate alkali solution, which was nearly removed the impurities, adding 0.5M $H_2O_2$. It was found that uranium could be selectively recovered (/removed) from TDSW.

• KSBB Journal
• /
• v.16 no.5
• /
• pp.523-525
• /
• 2001

Curdlan is one biopolymer composed of ${\beta}$1,3-glucan and dissolved in a alkali solution but formed salt under neutral or acid condition. It was produced by Agrobactrium species and the separation process is necessary to make pure curdlan from the culture broth. The pH swing separation method was as feasible separation process using solubility changes with the pH difference. however, this method requires a lot of acid and alkali solution also produces a lot of waste. Therefore, an efficient process which could save energy and minimize toxic waste was developed. A density gradient separation process was developed in this research. High density sucrose solution was used as a separation agent. Curdlan was separated from the culture broth when the density of the sucrose solution was 1.15 g/L. Since the curdlan was produced on the surface of cell wall. the pre-treatment of culture broth was necessary. Curdlan recovery yield was increased up to 83% with the homogenization of the culture broth and further increased up to 87% with the treatment of alkai-acid solution.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.557-560
• /
• 2009

In this study, a new wet etching method and the solution for thinning the glass with the thickness below $100{\mu}m$ were investigated. For the preparation of etching solution with low hydrofluoric acid, it was effective to use $NH_4F$ or $NH_4HF_2$ as a main ingredient with the addition of sulfuric acid or nitric acid. Influence of the composition of mixed acid solution and the temperature on the etching rate was investigated. The addition of anionic surfactant provides the function to prevent the adhesion of sludge generated by the etching reaction. A new wet etching pilot device equipped with streaming generation parts was used to test etching of commercial non-alkali glass and soda lime glass. The non-alkali glass with the thickness of 640 ${\mu}m$ and soda lime glass with the thickness of $500{\mu}m$ were etched to $45{\mu}m$ and $100{\mu}m$, respectively, by using the pilot device. After the etching by pilot device, the roughness degree of the glass surface was maintained at $0.01{\sim}0.02{\mu}m$.

• Journal of Pharmaceutical Investigation
• /
• v.4 no.1_2
• /
• pp.13-18
• /
• 1974

Data are present for the interaction of beta-cyclodextrin with 7 pharmaceuticals in aqueous solution. By means of the solubility method of analysis, definite interaction were found to occur with all the compounds tested. The amount of these pharmaceuticals in equilibrium with their respective solid phase increased progressively with beta-cyclodextrin. A concentration of 1.5 g of beta-cyclodextrin per 100 ml of water increased the solubility of most compounds tested (except one) by 15-120%. Hydrolysis in alkali solution of chrolothiazide was retarded in the presence of beta-cyclodextrin.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.261-265
• /
• 1993

The ion exchange capacity of DBPDA ion exchanger, {(4,5):(13,14)-dibenzo-6, 9, 12-trioxa-3, 15, 21-triazabicyclo [15.3.1] heneicosa-1(21), 17, 19-triene-2, 16-dione : DBPDA ion exchanger} was 4.2meq/g. The distribution coefficients of alkali and alkaline earth metal ions in the various concentrations of hydrochloric acid were determined using DBPDA ion exchanger. Also alkali and alkaline earth metal ions were separated using DBPDA ion exchanger. From these results the effect of pH of solution and ionic radii of the metal ions on the distribution coefficients of alkali and alkaline earth metal ions were discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.801-809
• /
• 2007

Fly ash and blast furnace slag are an industrial by-product that can be alkali-activated to yield adhesive and cementitious materials, whose production is less energy-intensive and emits less $CO_2$ than ordinary Portland cement manufacture. A laboratory investigation was carried out to evaluate the effect of alkali-activating conditions on compressive strength of fly ash/slag cement and the acid corrosion resistance of this cement. Two alkali activator solution, NaOH and waterglass + NaOH solutions, were used. Waterglass concentration was the factor that gave the highest compressive strength in all tests. The next significant factor was the NaOH concentration, followed by curing temperature. Acid corrosion resistance of FC(fly ash cement) and FSC(fly ash/slag cement), such as sulfuric$(H_2SO_4)$ and hydrochloric acid(HCl), was for better than Portland cement(PC).

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.433-440
• /
• 1988

Dried anchovy (Engraulis japonica) was ground and treated with 0.3N NaOH solution and then hydrolyzed with proteolytic enzymes. Extracts obtained by centrifugation of alkali-enzyme treated anchovy slurry was compared with water extract for the yields of soluble solid, protein and ashes and organoleptic characteristics. The data for the yields of the soluble solids, protein and ash showed that a 2-3 folds increase in those yields was resulted by combined alkali-enzyme treatments when it was compared to water only extract. The organoleptic evaluation on the alkali-enzyme treated anchovy extracts also showed a 2-3 folds in flavor strength of all descriptions in odor and taste and a significant improvement in total odor or taste acceptability.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.97-103
• /
• 2010

In this study, a new, relatively simple fabrication method for forming a mesoporous $Al(OH)_3$ film on Al substrates was demonstrated. This method, i.e., alkali surface modification, was simply comprised of dipping the substrate in a $5\times10^{-3}$ M NaOH solution at $80^{\circ}C$ for one minute and then immersing it in boiling water for 30 minutes. After alkali surface modification, a mesoporous $Al(OH)_3$ film was formed on the Al substrate, and its chemical state and crystal structure were confirmed by XPS and TEM. According to the results of the XPS analysis, the flake-like morphology after the alkali surface modification was mainly composed of $Al(OH)_3$, with a small amount of $Al_2O_3$. The mesoporous $Al(OH)_3$ layer was composed of three regions: an amorphousrich region, a region of mixed amorphous and crystal domains, and a crystalline-rich region near the $Al(OH)_3$ layer surface. It was confirmed that the stabilization process in the alkali surface modification strongly influenced the crystallization of the mesoporous $Al(OH)_3$ layer.

• Journal of Power System Engineering
• /
• v.20 no.1
• /
• pp.42-49
• /
• 2016

This study showed that on-site ferrate(VI) solution was synthesized by wet oxidation method and applied aqueous 2,4-dichlorophenol(DCP) solution to evaluate the degradation efficiency. On-site ferrate(VI) solution was synthesized by putting $FeCl_3{\cdot}6H_2O$ in the strong alkali solution with NaClO and NaOH and applied DCP solution directly. DCP solution was extracted by the liquid-liquid method and analyzed by GC-ECD. The factors such as pH, DCP initial concentration, injected ferrate(VI) dosage, temperature were investigated. The optimum pH and temperature conditions of DCP degradation were obtained in neutral condition and $35^{\circ}C$. And the experimental results showed that DCP removal efficiency also increased with the decrease of DCP initial condition and the injected ferrate(VI) dosage.