• 한국의류학회지
• /
• 제44권6호
• /
• pp.1070-1086
• /
• 2020

This study analyzed the size of women in their 60s, 70s and 80s in the 2014 Human Body Dimension Survey data among Size Korea's 7th Human Dimension Survey Data in 2015. This study examined the characteristics of changes in female body shape according to aging and the age range. The height item gradually decreased from the 60s and then rapidly decreased to the 80s. In the case of the circumference item, a sharp change occurred in the section from 69 to 70 years old. The reduction in hip height, waist height, and navel level waist height was not significant compared to the decrease in stature. Both width, thickness, and circumference gradually decreased with age. It can be seen that the back bends forward and the legs become thinner than the body due to the aging phenomenon with increasing age. Even for older women, the characteristics of aging differ in their 60s, 70s and 80s, so age segmentation of silver clothing should be considered.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.268-272
• /
• 2008

Interfacial characteristics of aluminum borate whisker reinforced AS52 matrix composite was investigated. Peak hardness of AS52 composite was obtained aging at $170^{\circ}C$ for 15h and the aging process was accelerated by the presence of the aluminium borate whisker. The MgO layer, which was the interfacial reaction product between the reinforcement and the Mg matrix, was produced with 20 nm thickness in as-cast condition. As the aging time increased, the thickness of the interfacial reaction layer increased to 50 nm in peak aged condition. The nano-indentation test results indicated that the strength of interface was improved by the aging but over-aging degraded the reinforcement and decreased the interfacial strength which resulted in the decrease of overall composite strength.

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1183-1210
• /
• 2016

Viscoelastic sandwich structures (VSSs) are widely used in mechanical equipment, but in the service process, they always suffer from aging which affect the whole performance of equipment. Therefore, aging state recognition of VSSs is significant to monitor structural state and ensure the reliability of equipment. However, non-stationary vibration response signals and weak state change characteristics make this task challenging. This paper proposes a novel method for this task based on adaptive second generation wavelet packet transform (ASGWPT) and multiwavelet support vector machine (MWSVM). For obtaining sensitive feature parameters to different structural aging states, the ASGWPT, its wavelet function can adaptively match the frequency spectrum characteristics of inspected vibration response signal, is developed to process the vibration response signals for energy feature extraction. With the aim to improve the classification performance of SVM, based on the kernel method of SVM and multiwavelet theory, multiwavelet kernel functions are constructed, and then MWSVM is developed to classify the different aging states. In order to demonstrate the effectiveness of the proposed method, different aging states of a VSS are created through the hot oxygen accelerated aging of viscoelastic material. The application results show that the proposed method can accurately and automatically recognize the different structural aging states and act as a promising approach to aging state recognition of VSSs. Furthermore, the capability of ASGWPT in processing the vibration response signals for feature extraction is validated by the comparisons with conventional second generation wavelet packet transform, and the performance of MWSVM in classifying the structural aging states is validated by the comparisons with traditional wavelet support vector machine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.583-587
• /
• 2006

A series of images were displayed on an OLED display placed within a digital still camera body to characterize the aging of the OLED display in a realistic environment and with an image set that matches actual consumer usage as closely as possible. The aging characteristics of the OLED display were measured and shown to meet the requirements of a digital still camera application by a wide margin.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.109-114
• /
• 2002

Aging stabilities of the operating frequency of piezoelectric devices such as filter, oscillator and discriminator are very important. In this study it was studied aging stabilities of the length-extensional vibration mode of Pb(Zr$\_$y/Ti$\_$1-y/)O$_3$+x[wt%]Cr$_2$O$_3$ ceramics. PZT ceramics in Morphotropic phase boundary have higher aging rates of k$\_$31/ and resonant frequency than those in tetragonal phase or rhombohedral phase. Thermal aging moves the composition with maximum aging rate to Zr-rich side in Cr not added PZT system. Aging rate of resonant frequency of the ceramics with x=0.1, y=0.53 and x=0.3, y=0.53 increased by thermal aging.

• Transactions on Electrical and Electronic Materials
• /
• 제10권4호
• /
• pp.125-130
• /
• 2009

The clamping voltage characteristics and accelerated aging behavior of CoCrTb-doped Zn/Pr-based varistors were investigated for different sintering temperatures. The best clamping voltage characteristics were obtained for the varistors sintered at $1330^{\circ}C$, with a clamping voltage ratio (K) of 1.63 at a surge current of 5 A and 1.75 at a surge current of 10 A. The varistors sintered at $1330^{\circ}C$ exhibited the highest stability, with -0.1% in $%{\Delta}E_{1\;mA}$, -0.2% in $%{\Delta}{\alpha}$, and +15.5% in $%{\Delta}J_L$ for E-J characteristics under a stress state of 0.90 $E_{1\;mA/120^{\circ}C$ /24 h. Furthermore, it exhibited $%{\Delta}{\varepsilon}_{APP}$' of -0.7% and $%{\Delta}tan{\delta}$ of +5.7% for dielectric characteristics under the same stress state.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.221-224
• /
• 1997

In this study we investigated the acting characteristics of Polymers for electrical insulation by UV radiation and salt water spray treatment. We used the Polymers such as EPDM, SR. PTFE. EVA. We measured contact angle and surface resistance to know the aging characteristic of Polymer surface. And we use SEM to observe the change of the surface shape. Dry flashover voltage test impulse voltage test were carried for the polymer insulator(EVA) . Through this experiment and the analysis we could know the polymers have a good resistance to weathering conditions like as salt spray UV irradiation and mix of them. And we can compare the aging characteristics between Polymers. As a result, we could know that the surface characteristics of PTFE is better than the other. And the degree, electrical characteristics is affected by change of surface shape is not big.

• 한국식품영양과학회지
• /
• 제35권5호
• /
• pp.622-628
• /
• 2006

매실추출액의 농도를 달리 첨가하여 "매실고추장"을 제조하고 실온에서 100일간 숙성시키면서 품질특성을 비교하였다. 고추장의 pH는 숙성 중 전반적으로 감소하였고 적정 산도는 증가하는 경향을 나타내었다. 수분함량은 숙성 60일까지 다소 증감을 보이다. 숙성후기에는 증가한 반면 수분활성도는 숙성기간 중 감소하는 경향을 나타내었다. 식염은 숙성기간 중 증가하였고, 대조구가 매실추출액을 첨가한 실험구보다 다소 높은 식염 함량을 나타내었으며 매실추출액 함량이 증가할수록 식염의 함량은 다소 낮았다. 고추장의 L*, a*값은 숙성 중 감소하였고, b*값은 숙성초기 감소하다가 숙성 60일째 값이 크게 증가하다가 그 이후에는 감소하는 경향을 나타내었다. 매실추출액을 첨가한 고추장이 대조구에 비해 L*, a*, b*값 모두 낮게 나타났고 매실추출액 첨가량이 증가할수록 L*, a*, b*값이 현저하게 감소하였다. 당도는 숙성이 진행됨에 따라 서서히 증가하였고, 환원당은 숙성초기에는 증가하여 숙성기간 40일에 최고치에 달한 후 서서히 감소하였다. 아미노태 질소는 숙성초기에 증감하다 숙성 40일 이후에는 지속적으로 증가하여 100일 숙성 후에는 $230.00{\sim}246.00mg%$ 수준을 나타내었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.367-368
• /
• 2009