• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2022

In this paper, the design of lightweight S-Box structure for implementing a low power AES cryptosystem based on composite field. In this approach, the S-Box is designed as a simple structure by which the three modules of x², λ, and GF((2²)²) merge into one module for improving the usable area and processing speed on GF(((2²)²)²). The designed AES S-Box is modelled in Veilog-HDL at structural level, and a logic synthesis is also performed through the use of Xilinx ISE 14.7 tool, where Spartan 3s1500l is used as a target FPGA device. It is shown that the designed S-Box is correctly operated through simulation result, where ModelSim 10.3. is used for performing timing simulation.

• Journal of Acupuncture Research
• /
• v.39 no.1
• /
• pp.10-16
• /
• 2022

This study aimed to analyze the status of adverse events (AEs) in the treatment of musculoskeletal conditions/diseases using thread embedding acupuncture (TEA). Five electronic databases were searched to retrieve data on clinical studies published in the last 5 years (2016 to 2021). Of the 151 studies retrieved, 22 studies analyzed AEs and were selected for this review. There were no AEs reported in 6 studies (27.3%); of the remaining 16 studies, 4 studies (18.2%) reported AEs that were not related to TEA. The most common AEs reported in the Chinese studies were redness of skin with/without swelling and tingling sensation, and in the Korean studies they were stiffness, a foreign body sensation, and bruising. The percentage of patients with AE experience was 5.1% in the Chinese studies and 19.9% in the Korean studies. The discrepancies between the findings in the Chinese and Korean studies may be attribute to differences in the diameter of needles, thread materials, TEA treatment procedure, and evaluation methods for AEs. Most of the reported AEs were of a mild status and did not last for a long time. However, further research on the clinical course after TEA treatment is needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.115-117
• /
• 2022

Whitebox encryption technique is a method of preventing exposure of encryption keys by mixing encryption key information with a software-based encryption algorithm. Whitebox encryption technique is attracting attention as a technology that replaces conventional hardware-based security encryption techniques by making it difficult to infer confidential data and keys by accessing memory with unauthorized reverse engineering analysis. However, in the encryption and decryption process, a large lookup table is used to hide computational results and encryption keys, resulting in a problem of slow encryption and increased memory size. In particular, it is difficult to apply whitebox cryptography to low-cost, low-power, and light-weight Internet of Things products due to limited memory space and battery capacity. In addition, in a network environment that requires real-time service support, the response delay time increases due to the encryption/decryption speed of the whitebox encryption, resulting in deterioration of communication efficiency. Therefore, in this paper, we analyze whether the AES-based whitebox(WBC-AES) proposed by S.Chow can satisfy the speed and memory requirements based on the experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.61-62
• /
• 1994

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.221-227
• /
• 2014

When implementing cryptographic algorithms in mobile devices like smart cards, the security against side-channel attacks should be considered. Side-channel attacks try to find critical information from the side-channel infromation obtained from the underlying cryptographic devices' execution. Especially, the power analysis attack uses the power consumption profile of the devices as the side-channel information. This paper proposes a new gate-level countermeasure against the power analysis attack and the glitch attack and suggests how to apply the measure to securely implement AES.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.591-594
• /
• 2005

This paper describes a design of AES-based CCM Protocol for IEEE 802.11i Wireless LAN Security. The CCMP core is designed with 128-bit data path and iterative structyre which uses 1 clock cycle per round operation. To maximize its performance, two AES cores are used, one is for counter mode for data confidentiality and the other is for CBC(Cipher Block Chaining) mode for authentication and data integrity. The S-box that requires the largest hardware in AES core is implemented using composite field arithmetic, and the gate count is reduced by about 23% compared with conventional LUT-based design. The CCMP core designed in Verilog-HDL has 35,013 gates, and the estimated throughput is about 768Mbps at 66-MHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.97-104
• /
• 2010

This paper presents a high performance 32-bit single core AES architecture. The proposed architecture employs a 5-stage pipeline: four stages in the ShiftRows/InvShiftRows module, and one stage in the MixColumn/InvMixColumn module. Circuit size reduction has been achieved through merging of the shift rows and inverse shift rows. The mix column and inverse mix column share the same resources. Three 32-bit registers replace the conventional ten 32-bit registers in the RCON architecture. The proposed architecture has been implemented in Verilog HDL, and yields 415 Mbits/s throughput with the circuit size of 13764 gate equivalents on the 0.18um CMOS process technology. This high performance architecture is suitable for wireless network router applications.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.1
• /
• pp.33-39
• /
• 2009

This paper presents a new secure scan design technique to protect secret key from scan-based side channel attack for an Advanced Encryption Standard(AES) core embedded on an System-on-a-Chip(SoC). Our proposed secure scan design technique can be applied to crypto IF core which is optimized for applications without the IP core modification. The IEEE1149.1 standard is kept, and low area and power consumption overheads and high fault coverage can be achieved compared to the existing methods.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.9
• /
• pp.494-503
• /
• 2003

In this paper, we propose the implementation techniques of IC card chipset that is compatible with international standard ISO-7816 and supports WindowsCE operating system to expropriate various electronic cash and credit card. This IC card interface chip set is composed with 32 bit ARM720T Core and AES(Advanced Encryption System) cryptography module for electronic commerce. Six IC card interfaces support T=0, T=1 protocol and two of them are used to interface with user card directly, the others are used for interface with SAM card. In addition, It supports a LCD controller and USB interface for host. We improved the performance about 70% than software based It card chip set and verified using Hynix 0.35um process.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.215-221
• /
• 2000

Analysis of fly ashes from the MSW incinerators was carried out using XRF, ICP-MS and ICP-AES. It was found that the major elements of fly ash were Ca, K, Na, Si, Al, S, Cl and O by the XRF analysis. The XRD spectra showed that the fly ashes were mainly consisted with the chlorides, hydroxides, carbonates and also oxides of former elements. For the determination of minor elements such as Zn, Pb, Cu, Cr, and Cd, we used ICP-AES and ICP-MS after microwave digestion and the results were compared with the result of XRF.