• 항공우주시스템공학회지
• /
• 제16권1호
• /
• pp.70-80
• /
• 2022

공중급유 능력은 항공기의 임무시간 증대와 운용영역 확장을 제공함에 따라 많은 군용기에 적용 및 운영되어왔다. 피급유기가 지정된 급유기로부터 공중급유를 받기 위해서는 기술 및 운용호환성평가를 통해 공중급유허용을 확보해야 한다. 적합성 평가에는 공중급유 조종성, 기능성, 연료, 조명시스템 평가를 포함하고 있으며 비행시험을 통해 최종 검증된다. 그러나 한국에서는 신규개발항공기에 대한 공중급유 적합성 평가를 수행한 사례가 없기 때문에 시험 요구도, 범위 및 프로그램 규모를 결정하기 위한 경험이 없는 상황이다. 본 논문에서는 공중급유 유형 소개와 한국 공군에 도입된 Boom & Receptacle 시스템에 대한 고정익 항공기 공중급유 FCS (Flight Control System) OFP (operational flight program) 검증, 시스템 검증 및 영역 허용 관련 공중급유 비행시험 방법을 연구하였다.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1112-1117
• /
• 2014

Unmanned aerial vehicles (UAVs) are a popular research topic because of a great ripple effect in the future. However, current UAV technologies cannot be applied to manual aerial vehicles without any modification. As an alternative to current UAV technology, humanoid robots are adopted as pilots. If a humanoid robot controls an aerial vehicle autonomously, not only could manual aerial vehicles be utilized as UAVs, but the humanoid robot would also be put into an environment created for humans and conduct some missions suitable for humans. Humanoid robots are also able to handle tools and equipment designed for humans. In order to prove that a humanoid robot can pilot an airplane, an experiment is performed and the results of this experiment are shown in this paper.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1253-1259
• /
• 2008

This paper presents a landing controller and guidance law for net-recovery of fixed-wing unmanned aerial vehicles. A linear quadratic controller was designed using the system identification result of the unmanned aerial vehicle. A pursuit guidance law is applied to guide the vehicle to a recovery net with imaginary landing points on the desired approach path. The landing performance of a pure pursuit guidance, a constant pseudo pursuit guidance, and a variable pseudo pursuit guidance is compared. Numerical simulation using an unmanned aerial vehicle model was performed to verify the performance of the proposed landing guidance law.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.230-236
• /
• 2007

In this study, a tail rotor system for an agricultural RF controlled helicopter was developed and tested. This study concluded the mechanical development of the 'Agro-heli' by completing the tail rotor system and its radio console. The RF control system was closely related with the tail system for the control of flying attitude. The thrust of the tail system balance off the reaction torque, created by the main rotor. Lifting tests with and without the tail system were compared for estimating the consumption of power. The tail system would use $4{\sim}5%$ of the total power which was in an acceptable range. Flying performance and attitude was visually inspected. It showed reliable and safe control during the distance flying trials and could be adapted for utilization in aerial applications. Aerial application using an RF controlled agricultural helicopter may make precise and timely spraying possible.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.131-138
• /
• 2004

Automatic flight control system (AFCS) for a low-cost unmanned aerial vehicle is described in this paper. Development process and block diagram of the AFCS are introduced. The flight control law for longitudinal and lateral channel autopilot is designed using optimization process. In this procedure, the performance index is composed of desired location of closed loop system poles and H$_2$norm of the resultant flight control system. This procedure is applied to the autopilot design of an unmanned target vehicle. Performance of the AFCS is evaluated by processor-in-the-loop simulation test and flight test. These results show that the AFCS has acceptable performance fur low cost UAV.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.51-60
• /
• 2007

This paper describes a visual tracking control law of an Unmanned Aerial Vehicle(UAV) for monitoring of structures and maintenance of bridges. It presents a control law based on computer vision for quasi-stationary flights above a planar target. The first part of the UAV's mission is the navigation from an initial position to a final position to define a desired trajectory in an unknown 3D environment. The proposed method uses the homography matrix computed from the visual information and derives, using backstepping techniques, an adaptive nonlinear tracking control law allowing the effective tracking and depth estimation. The depth represents the desired distance separating the camera from the target.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권2호
• /
• pp.51-56
• /
• 2017

최근에 증가한 무인항공기(Unmanned Aerial Vehicle, UAV) 활용에 따라 다양한 UAV 제어 방법이 도입되고 있다. 일반적으로는 UAV 조종기를 통해 직접 제어하는 방법이 많이 활용되고 있다. 하지만, 세밀한 UAV 제어를 위해서는 직관적인 사용자 인터페이스가 필요하다. 이 논문에서는 다수개의 Myo로 UAV를 제어하는 방법을 제안한다. 이를 위해서 기 개발된 지상관계시스템을 통해 Myo로 UAV를 제어하는 방법을 소개한다. 체감형 인터페이스로 UAV를 제어함으로써 직관적인 제어가 가능하다.

• 제어로봇시스템학회논문지
• /
• 제12궈1호
• /
• pp.78-84
• /
• 2006

This paper describes UAV (Unmanned Aerial Vehicle) control system which employs PC104 modules. It is controlled by application program based on Linux OS. This application consists of both Linux device driver in kernel-space and user application in user-space. In order to get data required in the unmanned flight, external devices are connected to PC104 modules. We explain how Linux device drivers deal with data transmitted by external devices and we account for how the user application controls UAV on the basis of data processed in the device driver as well. Furthermore we look into the role of GCS (Ground Control Station) which is to monitor the state of UAV.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.618-638
• /
• 2020

An unmanned aerial vehicle(UAV) refers to an aircraft that has all or part of its functions to autonomously fly by grasping the surrounding environment by remote control on the ground without a pilot on board. With the development of unmanned aerial technology, civil/military forces are developing unmanned aerial vehicles for various purposes. In order to control unmanned aerial vehicles from the ground, communication protocols between unmanned aerial vehicles and ground control equipment are required, and civil/military forces have developed and used a photocall for different purposes. In this study, the characteristics of the MAVLink protocol used in the private sector and the STANAG 4586 protocol used in the military are compared/analyzed in detail to find elements to complement each other and to draw improvement measures for protocol unification.

• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.613-618
• /
• 2018

We are developing a shared remote control mobile robot for aerial work in nuclear power plants (NPPs); a robot consists of a mobile platform, a telescopic mast, and a dual-arm slave with a working tool. It is used at a high location operating the manual operation mechanism of a fuel changer of a heavy water NPP. The robot system can cut/weld a pipe remotely in the case of an emergency or during the dismantling of the NPP. Owing to the challenging control mission considering limited human operator cognitive capability, some remote tasks require a shared control scheme, which demands systematic software design and integration. Therefore, we designed the architecture of the software systematically.