• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.217-223
• /
• 2015

This paper describes the design and implementation of a network system for UAV for multiple clients that enables long-range operation based on a commercial mobile network. A prototype data modem is developed with a commercial embedded M2M module in order to provide an access to the mobile network. A central server with a database is constructed to record all of real-time flight and video data and communicate with a ground control system. A GCS is developed for the central control, the single UAV and the smart phone version to be used for different purposes. Performance tests were progressed for data delay, video frame rate and state of clients. Flight tests were also performed to verify the reliability of the modem with respect to altitude.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1059-1067
• /
• 2011

Next-Generation ITS environment requires high-speed data packet transmission, security, authentication, and hand-over supportable for driving vehicle on road by installing RSEs and OBUs. Therefore, wireless communication technology for next-generation ITS services are advancing to 200km/h maximum speed supportable, 1km communication radius, minimum 10Mbps hish-speed datarate for multimedia data(such as text, images, movie clips and so on) supportable, high reliability. In this paper, we implemented WAVE communication system which based on IEEE 802.11p PHY/MAC and evaluated that the system meets next-generation ITS environments.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1025-1033
• /
• 2011

This paper presents a realization of a peer-to-peer communication system for a UAV navigational monitoring using a commercial HSDPA(High Speed Download Packet Access) mobile communication device. The realized system consists of a communication server, an air data terminal and multiple ground monitoring devices, where the server transfers navigational data from a UAV to multiple monitoring devices in real-time with commercial HSDPA modem. Through ground and flight tests, data were obtained to observe the realized system. Test results show that, depending on communicational environment, about 300msec delay, congestion and packet-loss between air data terminal and ground monitoring devices. Nevertheless, through high-speed long range test on a ground vehicle and altitude test with a UAV flight, the feasibility of a UAV navigational monitoring system was observed.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.145-152
• /
• 2017

As a popularization of small UAS to have improved flight performance and easiness of controlling, the UAS industry is increased and also small UAS is to be a new threat for airspace security of national strategic infrastructure. Rising the new threat makes the negative side effect of small UAS operation. This phenomena brought to new R&D needs "defense system" for small UAS/UAV - called Anti-Drone. The paper addressed case study of defects, accidents and threats by small UAS/UAV as world wide level, and research and development trend of UAS defense system as each technical category - CONOP (Concept of Operation), identification/recognition method and control/supremacy techniques. As a result, this suggests the direction what and where drone defense system should be applied first and required for Korean society in the view of society system (regime) and a point of view for minimizing side effect as UAS popularization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.525-530
• /
• 2006

Recently companies which do not use the heavy metals such as lead, chrome, mercury to the electronic goods and alternate the materials environment-friendly are increasing. In advanced country, lead-free solder without lead is developed and soldering process almost disappeared. The lead-free solder is environment-friendly but is expensive and lack of tack and durability than lead, the improvement is necessary. To solve this problem, the welding process that uses TIG welding and the welding technology between different kind metals for lead-in wire of room lamp and base department was developed. To do this, previous room lamp manufacturing process was analysed and which process can be alternate was proposed. And the test for selection of optimal value of TIG welding parameter was done. Finally the lamp aging test and earthquake resistant test was done to check the reliability of welded room lamp.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.209-214
• /
• 2014

Current black boxes have a problem of storing unnecessary imagery data recordings without data classification. For this reason, users have to erase videos every time. This method is inadequate for black boxes with limited memory capacity. In this paper, we design and implement a system that recognizes traffic accident situations and saves these recordings by classifying them according to weighted values. The system was made to save video recorded at a 30-sec interval of every event to black box folders by changing names based on weighted value data under the external environment in a 1:10 scale model car. Based on this, when the tests were performed as a major car accident while driving, the videos were created in w2 folder, and when the tests were performed as a minor car accident while stopped, the videos were created in w1 folder.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.521-528
• /
• 2017

Research on AI is essential to build a system with collective intelligence that allows a large number of UAVs to maintain their flight while carrying out various missions. A typical approach of AI includes 'top-down' approach, which is a rule-based logic reasoning method including expert system, and 'bottom-up approach' in which overall behavior is determined through partial interaction between simple objects such as artificial neural network and Flocking Algorithm. In the same study as the existing Flocking Algorithm, individuals can not perform individual tasks. In addition, studies such as UAV formation flight can not flexibly cope with problems caused by partial flight defects. In this paper, we propose organic integration between top - down approach and bottom - up approach through multi - agent system, and suggest a flight flight algorithm which can perform flexible mission through it.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.529-536
• /
• 2017

The general ground control system has control and information display functions for the operation of a single unmanned aerial vehicle. Recently, the function of the single ground control system extends to the operation of multiple UAVs. As a result, operators have been exposed to more diverse tasks and are subject to task overload due to various factors during their mission. This study proposes an adaptive ground control system that reflects the operator's condition through the task overload measurement of multiple UAV operators. For this, the ground control software is developed to control multiple UAVs at the same time, and the simulator with six degree-of-freedom aircraft dynamics is constructed for realistic human-machine-interface experiments by the operators.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.134-141
• /
• 2020

Telemetry system is a communication system that measures and transmits various signals in the aircraft to the ground for collecting and monitoring flight data during the development of unmanned air vehicle and satellite launch vehicles. With the recent development of wireless communication technology, it is becoming important to apply encryption of telemetry system to prepare with security threats that may occur during flight data transmission. In this paper, we suggested and implemented the application method of ARIA-256, Korean standard encryption algorithm, to apply encryption to telemetry system. In consideration of the block error propagation and the telemetry frame characteristics, frame is encrypted using the CTR mode and can apply the Reed-solomon codes recommended by CCSDS. ARIA algorithm and cipher frame are implemented in FPGA, and simulation and hardware verification system confirmed continuous frames encryption.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.73-84
• /
• 2020

To overcome ground congestions due to growing number of cars, a lot of companies have proposed personal aerial vehicle (PAV). Among PAV, electric vertical take-off and landing (eVTOL) aircrafts capable of vertical take-off and landing with electric power are drawing attention, and their configurations vary from multicopters to tilt ducted fans. This study tries to analyze the characteristics of each eVTOL design configurations. Parasite drag was calculated using component build up method for Vahana, Aurora, Volocopter representing each eVTOL PAV type of tilt-wing, compound, and multicopter. Wetted area and induced drag was calculated using OpenVSP and XFLR5 that are aircraft design and aerodynamic analysis software. The batteries used in the eVTOL PAV was assumed as Tesla 2170 batteries and flight ranges were calculated. Also, energy consumption and maximum flight time for the given mission profile including take-off and landing, cruising segments were compared for each eVTOL.