• 한국건설관리학회논문집
• /
• 제12권4호
• /
• pp.70-78
• /
• 2011

장기간에 걸쳐 진행되는 건설공사의 경우 공사수행기간동안 물가의 변동으로 인해 계약금액조정이 필요하며, 이를 적용하는 과정에서 일관되고 명확한 구체적 기준안이 요구되고 있다. 이에 본 연구는 물가변동이 발생되어 조정행위로 이어지기까지의 적용과정상 발생되는 핵심활동을 기반으로 실 사례를 통해 문제점을 파악하고 이에 따른 합리적 개선방안을 찾고자 하였다. 문헌연구 및 관련제도분석을 토대로 물가변동 조정행위의 적용 프로세스를 구분하였고 프로세스별 핵심활동 20개를 정의하였다. 이를 측정변수화 하여 37개의 물가변동 사례를 통해 사례분석을 실시하였다. 사례분석결과 각 프로세스별 문제점이 도출되었으며, 이에 대응하는 합리적 개선방안을 제시하였다. 본 연구를 통하여 발주자는 불필요하게 지급될 수 있는 예산의 낭비를 막을 수 있고, 계약상대자에게는 원활한 물가변동조정행위가 될 수 있는 기회가 제공되리라 기대한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.207-212
• /
• 2001

In this paper, a method to be able to decide the possible maximum gain of P, PI control for the retarded processes under stable condition is proposed. At first, adjustable parameter set causing stability limit are obtained based on the frequency domain condition which makes the roots of transfer function locate on the $j\omega$ axis. And the cut-in frequency $\omega{_p}$ to bring the parameter set to P control from PI control is derived by an equation with 2 parameters L and $T_m$ given, then $\omega{_p}$ is used to compute the maximum gain with stable condition. For the calculation, the controlled process of first order system with time delay element is introduced and all parameters are presumed to be time invariant.

• Korean Journal of Geomatics
• /
• 제4권1호
• /
• pp.9-16
• /
• 2004

An object-oriented design was carried out for the digital photogrammetric processes. Classes were identified and implemented to develop an integrated digital photogrammetry system using a 3 dimensional self-calibration model for CCD cameras. This integrated system is deemed to be a significant progress from the conventional photogrammetric system which is a series of discrete processes. Object oriented methodology was selected for the implementation of the integrated photogrammetric system because it would be a very complex task to get the same result using a procedural programming language. Besides the simplification of development effort, object oriented methodology has further benefits of better management of program in case when updates to parts of the program are necessary. Using the classes designed in this study, a 3 dimensional self-calibration model was developed for a CCD camera. Classes for data input and image handling as well as classes for bundle adjustment were implemented. The bundle adjustment system was further enhanced with member functions to handle additional parameters for principal point coordinates and focal length, thereby, enabling the application to non-metric CCD cameras.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2313-2318
• /
• 2003

By means of flexible forming processes in sheet metal manufacturing it is possible to produce parts of complex geometry within short manufacturing time. These procedures are suitable especially for prototyping or adjustment of deformation. Here formative procedures like laser forming are increasingly important, because they make the large-scale-like production of the prototypes with the required materials possible. High accuracy and reproducibility of the products is the precondition of the production. Due to the lack of a forming tool, complex geometries can hardly be manufactured within tolerances. To overcome this problem an automatic closed loop control system for the adjustment of deformations has been developed. An important element of the closed loop control system is the definition of a suitable irradiation strategy for laser forming. For the determination of the irradiation strategy a lot of influences must be taken into consideration from the field of material, geometry and laser. In this paper the improved closed loop control system and the development of an irradiation strategy for 4 mm deep buckles in an ALMgSi1 sheet will be represented. This system can be used e.g. in the automated adjustment of hail damage in car bodies or deformation by heat treatment.

• 대한간호학회지
• /
• 제37권5호
• /
• pp.736-743
• /
• 2007

Purpose: The purpose of this study was to develop a scale of free nursing home adjustment for the elderly in Korea. Method: The developmental processes were construction of a conceptual framework, development of preliminary items, verification of content validity, twice data gathering, verification of construct validity, and reliability of final items. The first 53 preliminary items were obtained through review of literatures about nursing home adjustment and in depth interviews with 5 staffs of nursing home. These items were reviewed by five specialists for content validity and 39 items were chosen. The first data was collected from 107 elderly residing in 3 nursing homes and the second survey was from 147 residents who were living in five nursing homes. Finally this data was analyzed for construct validity and reliability. Result: There were 23 final items which were sorted into 5 factors. The factors were identified as 'Relocation distress symptom'(8items), 'Making friends'(4items), 'Acceptance of new residence'(6items), 'Difficulty in group life'(3items), and 'Having self-worth'(2items). The cumulative percent of variance was 53.466%. The reliability of the scale, Cronbach's alpha was .837. Conclusion: The result of this study could be used for measuring nursing home adjustment of the elderly. However, for further validity and reliability, repeated researches are needed.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.432-439
• /
• 2013

The aim of this study was to investigate the processes for evaluating the allowable bending stress. The confidence levels and the size-adjustment in standards were reviewed with experimental data. The results show that, (1) KS F 2152 was more strict than others overseas standards due to the higher confidence level. The 5% NTL of bending strengths by a method in KS F 2152 were lower than the overseas standards and more specimens were required for evaluating the structural properties according to KS F 2152. (2) Due to the absence of size-adjustment method in domestic standards, the specified size and the exponential parameters on the size-adjustment equation were reviewed by size factors. The specified size (width: 286 mm, length: 6096 mm), and the exponential parameters (w: 0.29, l: 0.14) will be suitable for developing the allowable bending stress in domestic standard. (3) The size adjusted allowable bending stresses of No. 2 grade Korean pine were lower than the allowable stresses tabulated in KBC even though less strict method (75% confidence level) to calculate 5% value was used. The allowable stresses tabulated in KBC are needed to be reviewed by continuous experimental data.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.121-127
• /
• 2004

This paper presents a new vertex selection scheme for shape approximation. In the proposed method, final vertex points are determined by "two-step procedure". In the first step, initial vertices are simply selected on the contour, which constitute a subset of the original contour, using conventional methods such as an iterated refinement method (IRM) or a progressive vertex selection (PVS) method In the second step, a vertex adjustment Process is incorporated to generate final vertices which are no more confined to the contour and optimal in the view of the given distortion measure. For the optimality of the final vertices, the dynamic programming (DP)-based solution for the adjustment of vertices is proposed. There are two main contributions of this work First, we show that DP can be successfully applied to vertex adjustment. Second, by using DP, the global optimality in the vertex selection can be achieved without iterative processes. Experimental results are presented to show the superiority of our method over the traditional methods.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.435-446
• /
• 2000

Statistical process control(SPC) and engineering process control(EPC) are two strategies for quality improvement that have been developed independently. EPC seeks to minimize variability by adjusting compensatory variables in order to make the process level close to the target, while SPC seeks to reduce variability by monitoring and eliminating causes of variation. One purpose of this paper is to propose the IMA(0,1,1) model as the in-control process model. For the out-of-control process model we consider two cases; one is the case with a step shift in the level, and the other is the case with a change in the nonstationarity. Another purpose is to suggest the use of an integrated process control procedure with adjustment and monitoring, which can consider the proposed process model effectively. An integrated control procedure will improve the process control activity significantly for cases of the proposed model, when compared to the procedure of using either EPC or SPC, since EPC will keep the process close to the target and SPC will eliminate special causes.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.175-183
• /
• 2000

Proposed in this paper is a model-bated AFA (automatic feedrate-adjustment) method for maintaining smooth cutting-loads (i.e., cutting-force) during 2D-profile milling. Before the cutting-force model was established, some assumptions were verified through a series of preliminary cutting experiments (The results found that the curving-force was independent of the cutting speed and the cutting action at the cutter bosom). From the data obtained during the main cutting experiments, a “chip-load/cutting-force model”representing the cutting-force as a function of the chip-load (i.e., effective cutting-depth) and a feedrate is proposed. Based on the model. an AFA scheme for maintaining smooth cutting-force by adjusting the feedrate (i.e., F-code) according to the changes in chip-load was proposed. To check the validity of the proposed AFA scheme. another set of cutting experiments was conducted by using feedrate-adjusted NC-data while monitoring the actual machining processes using an accelerometer. The experimental results showed that the proposed AFA-scheme was quite effective.

• 대한가정학회지
• /
• 제41권11호
• /
• pp.201-214
• /
• 2003

The purpose of this research was to develop the education program for post-divorce adjustment and to evaluate effectiveness of the program. This program was consisted of eight sessions and applied to divorced parents. It was focused for the understanding of grief processes for adults, recovery by forgiveness, children's responses and coping strategies to divorce, open minded relationship between parents and children, and enhancement of self-esteem to be healthy single parent. Results of paired t-test showed that there were significant differences between pre-test and post-test, and the effectiveness remained until follow-up. In conclusion, this program was thought to be effective for improving self-esteem, divorce coping competency and minimizing of the depressions. Continual education is thought to be necessary for maintaining of the effectiveness to the divorced parents.