• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.1-14
• /
• 1977

These studies were carried out to know the variation of morphological tree forms, needles, cotyledons, seed characters and top height growth of seedlings of Pinus koraiensis S. et Z. by populations in Mt. Jiri. The results are summarized as follows: 1. It was observed that the characteristics of length, needles of serration density of needles, percentage of full seeds length, of seeds, thickness, of seeds length of cotyledons, width of cotyledon, numbers of the stomata line in cotyledons and the top height growth of seedlings were significantly different in individual trees and populations. 2. The characteristics of branch angle specific gravity of wood and resin canal numbers of cotyledons were significantly different in populations. 3. It was that the characteristics of numbers of stomata line, width, of seeds weight, of seeds serration density of cotyledons, numbers of cotyledons were significantly different in individuals. 4. The resin canals of needles showed three principle resin canals in individual trees and population, and the coefficients of variation were not shown in individual trees and populations. Stem forms showed to be a straight form with all populations. 5. The characteristics of cotyledons had generally higher tendency than the characteristics of needles in comparison with coefficience of variation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.118-127
• /
• 2015

In this study, chiffon cakes were prepared with wild grape powder. Different amounts of the wild grape powder were tested (3%, 6%, 9%, and 12%) to determine the optimal amount. Rice chiffon cake was evaluated for quality characteristics, antioxidant properties, and sensory evaluation. The specific gravity of control batter was 0.48 g/mL, and it decreased with increasing amounts of wild grape powder, whereas viscosity showed the reverse effect. The pH of batter and cake decreased with increasing amounts of wild grape powder. The moisture content significantly increased with increasing amounts of wild grape powder, and the water activity of cakes was not significantly different between samples from 0.905~0.908. For color, lightness and yellowness deceased with increasing amounts of wild grape powder, whereas redness showed the reverse effect. For texture, hardness, fracturability, gumminess, and chewiness significantly increased with increasing amounts of wild grape powder. Total polyphenol content, DPPH radical scavenging activity, and ABTS radical scavenging activity significantly increased with increasing amounts of wild grape powder. In the sensory evaluation, the control sample showed the highest scores for color, flavor, softness, and overall acceptability. Based on these results, wild grape powder could be considered as a functional material, and 6% wild grape powder is the optimum level for manufacture of rice chiffon cake.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.71-71
• /
• 2018

Sea pollution accidents have been occurred due to the increase of marine ship traffic. Oil spill from the hull hole induced by tanker collision results in the huge sea pollution. Proper and prompt reaction on such oil spill disaster is needed to minimize the damage. Thru-hull emergency wood plug is typically used to manually close small holes, while it is required to develop some mechanical devices for closing large holes in the hull due to huge fluid pressure. Accurate estimation of oil discharge and velocity from such holes are important to develop proper device to control hull hole damage. High resolution CFD modeling investigation on the configurations of hull hole of 7.5 m initial depth and 30 cm diameter, which was observed in the oil spill accident of the Hebei Sprit off the west coast of Korea in 2007, has been carried out to compute the oil spill velocity distribution in terms of flow depth. Friction loss due to the viscous flow and the discharge coefficient of crude oil with specific gravity SG = 0.85 and viscosity of $4-12cP(mPa{\cdot}s)$ at the temperature of $20^{\circ}C-100^{\circ}C$ are presented in terms of Reynolds number based on the results of high-resolution CFD modeling.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.185-191
• /
• 2021

In our study, we evaluated possibility of distillation process introduction for Korean Rubus coreanus balsamic vinegar production development, has a less complicated and more rapid process leading to higher production volumes and cost savings. In order to investigate the applicability of concentrated vinegar fraction (CVF) and distilled vinegar fraction (DVF) obtained from the distillation process as balsamic and distillation vinegar, acidity, pH, and specific gravity (S.G.) were measured for the vinegar fraction obtained from the distillation process. The acidity of final CVF (60% of initial volume) obtained 4 types of vinegar (acidity; 4.42, 4.84, 5.61, and 6.35) were increased mean 38.1%, compared to initial acidities. Especially, acidity and pH of the final CVF was similar to balsamic vinegar. In addition, acidity of DVF also increased and it of the final fraction was 4.41%, 4.95%, 5.88%, and 6.72%, respectively. And it was suggested that the final DVF could be used as distilled vinegar. In this study, it was confirmed that vinegar can be effectively concentrated through the distillation process, and distilled vinegar can be produced at the same time. However, it is thought that the introduction of the distillation process can be decided only after additional biochemical characteristics such as organic acid content and antioxidant activity measurement for each vinegar fraction are analyzed.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.40-61
• /
• 2017

This study investigated material characteristics of composition and variable strength measurement using physicochemical and petrographic analysis for lime-soil mixture barrier tombs of Guri Galmae site in Joseon Dynasty. The tomb barriers are composed mainly of microcrystalline calcite, quartz, feldspar and mica with lime matrix. The lime matrix shows compact sheet texture, and some samples show hydration aggregates with needle-shaped textures. Gypsum occurred as a secondary process where carbonization reactions were poor. Concentrations of CaO in the tomb barrier very widely ranged from 4.43 to 36.19 wt.%, specific gravity and absorption ratio of the materials show of 1.35 to 1.62 and 20.1 to 32.6%, respectively. As the rebound hardness, the materials ranged from 10.0 to 28.4 (mean 15.7). The values are higher in the $-90^{\circ}$ direction rather than in the $0^{\circ}$ direction with the consequence that the values indicate more strength toward the vertical direction. Difference in strength by directions was caused by the directions of the tomb barriers, which is related to the processes in each stage. In the tomb barriers, ultrasonic velocity and unconfined compressive strength ranged from 1,049.2 to 1,728.9m/s and under 5.00MPa, respectively. Variation patterns between the two are very similar in values. As the result of composition and strength, the materials of higher contents on CaO are higher in strength values. Generally, techniques and skills to make the lime-soil mixture barriers are interpreted as low qualities in relatively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.109-116
• /
• 2021

In order to replace mineral aggregate used as road pavement materials with steel slag aggregate, this present study evaluated mechanical properties of SMA Concrete mixtures using steel slag aggregate as oxidized slag from electric furnace in iron works. The variables of this experiment are the aggregate type of mineral and steel slag and the sieve sized of 10mm and 13mm. The physical properties inclu ding the specific gravity and absorption rate etc. of the slag aggregate mixtu res satisfied the KS standard as asphalt mixtu re. As a resu lt of evalu ating the mechanical properties of the asphalt mixtures, the optimum asphalt content of the slag aggregate mixtures were lower than that of the mineral aggregate mixtures, but other quality standards were all satisfied. In the deformation strength evaluation, the slag aggregate mixtures were measu red slightly higher than that of the mineral aggregate mixtu res, and the dynamic stability test satisfied the 2,000pass/mm standard value in all specimens. And, the moduli of resilient of the slag aggregate mixtures showed an improved value compared with the mineral aggregate mixtures. Therefore, as the resilient rate of the slag aggregate mixtures improved, it is speculated that there will be an effect of improving public performance according to the repeated traffic load of the vehicle.

• Composites Research
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2021

Metamaterials are complexes of elements that can create properties not found in naturally occurring materials, such as changing the direction of forces, creating negative stiffness, or altering vibration and impact properties. In the case of wood pile metamaterials that are easy to manufacture and have excellent performance in reducing vibration and shock in the vertical direction, basic research on variables affecting shock transmission is needed to reduce shock. Although research on impact reduction according to geometrical factors is being conducted recently, studies on the effect of material variables on impact reduction are insufficient. In this paper, finite element analysis was carried out by variablizing the geometrical properties (lamination angle, diameter, length) and material properties (modulus of elasticity, specific gravity, Poisson's ratio) of wood pile cylinders. Through finite element analysis, the shape of the wooden pile cylinder delivering impact was confirmed, and the effect of each variable on the reduction of impact force and energy was considered through main effect diagram analysis, and frequency band analysis was performed through fast Fourier transform. proceeded In order to reduce the impact force and vibration, it was found that the variables affecting the contact area of t he cylinder have a significant effect.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.701-718
• /
• 2021

Geological field surveys and a series of laboratory tests were conducted to obtain data related to landslides in Sancheok-myeon, Chungju-si, Chungcheongbuk-do, South Korea where many landslides occurred in the summer of 2020. The magnitudes of various factors' influence on landslide occurrence were evaluated using logistic regression analysis and an artificial neural network. Undisturbed specimens were sampled according to landslide occurrence, and dynamic cone penetration testing measured the depth of the soil layer during geological field surveys. Laboratory tests were performed following the standards of ASTM International. To solve the problem of multicollinearity, the variation inflation factor was calculated for all factors related to landslides, and then nine factors (shear strength, lithology, saturated water content, specific gravity, hydraulic conductivity, USCS, slope angle, and elevation) were determined as influential factors for consideration by machine learning techniques. Minimum-maximum normalization compared factors directly with each other. Logistic regression analysis identified soil depth, slope angle, saturated water content, and shear strength as having the greatest influence (in that order) on the occurrence of landslides. Artificial neural network analysis ranked factors by greatest influence in the order of slope angle, soil depth, saturated water content, and shear strength. Arithmetically averaging the effectiveness of both analyses found slope angle, soil depth, saturated water content, and shear strength as the top four factors. The sum of their effectiveness was ~70%.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.500-508
• /
• 2024

Objective: Due to current selection practices for increased egg production and peak persistency, the production profile, age at maturity, and body weight criteria for commercial layers are constantly changing. Body weight and age at the time of photostimulation will thus always be the factors that need to be adequately addressed among various production systems. The current study was carried out to determine the effects of pullets' body weight (low, medium, and heavy) on their performance, welfare, physiological response, and hormonal profile. Methods: With regard to live weight, 150 16-week-old pullets were divided into three groups using a completely randomized design (CRD) and held until the 50th week. One-way analysis of variance was used to evaluate the data under the CRD, and the least significant difference test was used to distinguish between treatment means. Results: In comparison to the medium and light birds, the heavy birds had higher body weight at maturity, an earlier age at maturity, and higher egg weight, eggshell weight, eggshell thickness, egg yolk index, breaking strength, egg surface area, egg shape index, egg volume, and hormonal profile except corticosterone. However, the medium and light birds had lower feed consumption rates per dozen eggs and per kilogram of egg mass than the heavy birds. Light birds showed greater body weight gain, egg production, and egg specific gravity than the other categories. At 20 weeks of age, physiological response, welfare aspects, and catalase were non-significant; however, at 50 weeks of age, all these factors-aside from catalase-were extremely significant. Conclusion: The findings of this study indicate that layers can function at lower body weights during photostimulation; hence, dietary regimens that result in lighter pullets may be preferable. Additionally, the welfare of the birds was not compromised by the lighter weight group.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.45-52
• /
• 1974

This study was carried out to examine the subsitution possibility into water soluble amino resins instead of phenolic resin as a sizing material for the strength increase on the wet forming hardboard. The properties of hardboard, manufactured with amino-resins based urea, melamine, formaline, and methanol which were low priced domestic products, were examined in comparison with those of hardboard treated with phenolic resin. In this study by the results and discussions, it may be summarized as follows: 1. Amino-resins are able to be substituted for the phenolic resin as a good sizing material for strength increase in the manufacture of wet forming hardboard. Under the considerations of economic advantages and properties of hardboard, modified urea-melamine resin was given a best results. 2. The specific gravities of hardboard that were treated with phenolic resin was equal to that treated with modified amino type resin, and in case of urea-melamine resin, the specific gravity value were lowest among them. 3. The results of moisture contents were satisfied the standard which calls for 13 percent or below. There were no differences in moisture contents between hardboards, treated with melamine resin and modified urea-melamine resin but phenolic resin. The moisture contents of hardboard treated with phenolic resin was shown the lowest. 4. The water absorption of hardboard treated with phenolic resin was greater than those treated with amino resins, and to satisfy the standard of water resistance, the treatment of 2 percent paraffin wax emulsion was needed in this case. There were no differences in water absorptions between hardboards, treated with melamine resin and modified urea-melamine resin. To satisfy the standard of water resistance in this case the treatment of 1 percent paraffin wax emulsion was shown good results. 5. The differences among the flexural strength in using tested three adhesives were significant. The flexural strength were shown the signification by order of melamine resin, modified urea-melamine resin, and phenolic resin. In all cases to satisfy the standard of flexural strength, the treatment of 3 percent sizing materials for strength increase was needed.