• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1259-1262
• /
• 1998

This paper introduced a scheme for finding the relationships between the measurements and tracks in multi-target tracking (MTT). We considered the relationships between targets and measurements as MRF and assumed a priori as a Gibbs distribution. An energy function is defined over the measurement space, as accurately as possible so that it may incorporate most of the important natural constraints. To find the minimizer of the energy function, we derived a new equation of closed form.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.5-8
• /
• 2000

This paper introduced a scheme for finding an optimal association matrix that represents the relationships between the measurements and tracks in multi-target tracking of Radar system. We considered the relationships between targets and measurements as MRF and assumed a priori of the associations as a Gibbs distribution. Based on these assumptions, it was possible to reduce the MAP estimate of the association matrix to the energy minimization problem. After then, we defined an energy function over the measurement space, that may incorporate most of the important natural constraints.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.12
• /
• pp.3976-3990
• /
• 2022

Currently, cross-attention is widely used in Siamese trackers to replace traditional correlation operations for feature fusion between template and search region. The former can establish a similar relationship between the target and the search region better than the latter for robust visual object tracking. But existing trackers using cross-attention only focus on rich semantic information of high-level features, while ignoring the appearance information contained in low-level features, which makes trackers vulnerable to interference from similar objects. In this paper, we propose a Multi-level Cross-attention Siamese network(MCSiam) to aggregate the semantic information and appearance information at the same time. Specifically, a multi-level cross-attention module is designed to fuse the multi-layer features extracted from the backbone, which integrate different levels of the template and search region features, so that the rich appearance information and semantic information can be used to carry out the tracking task simultaneously. In addition, before cross-attention, a target-aware module is introduced to enhance the target feature and alleviate interference, which makes the multi-level cross-attention module more efficient to fuse the information of the target and the search region. We test the MCSiam on four tracking benchmarks and the result show that the proposed tracker achieves comparable performance to the state-of-the-art trackers.

• Journal of the Korean Society of Costume
• /
• v.54 no.3
• /
• pp.53-64
• /
• 2004

The study was done to provide domestic fashion multi-shops with basic information about the product and price strategies through an investigation the marketing strategies for domestic multi-shop dealt with imported product only. Data were collected from Interview with a buyer or a staff of marketing department of Domestic Fashion Multi-shop dealt with Imported Product only. Through the study, it was clarified that these multi-shops showed a tendency to compose of promising brands. brands set a high value on unique character or technique, and brands of promising designer noticed at the main collection. And they also extended their lines as a total life style shop dealt with accessory. shoes and home collection as well as clothing. Therefore, they had to analyze their target consumer's life style and applied this to organization of product, brands or sizing. To maintain the balance of multi-shop they bought products keeping the balance between all the brands and didn't lose variety of concept, it was demanded to develop new brands as well. Their distribution channels had to be planned by regional characteristic that could be accepted their target consumers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.146-151
• /
• 2016

In this paper, we present a method for estimating the ratio of CPA distance to velocity of underwater target using target bearing information in CPA situation. This ratio can be estimated by previous research which is Envelope CPA using proximity sensor but it has low performance if the target is close to receiver sensor or bigger interference caused by multi-path effects. Therefore we propose a Bearing CPA technique using a target bearing information as a way to overcome.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.129-135
• /
• 2011

In this paper, we propose a multi target's elevation angle estimation method using multi beam forming technique. This method make a stacked beam to digital processing a received signal in array element. There can be desired receiving beam to application weight value at antenna element in beam forming. Currently, we are to make multi stacked beam using fast fourier transform in stead of phase shifter to be a computer performance much improvement. Also, we improve multi beam directivity using beam steering error correction technique in order to beam steering to desired direction in receiver. Through simulation, we show that the proposed elevation estimation method based on fast fourier transform and beam steering error correction technique, improves th performance of target estimation compared to previous method.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.47-57
• /
• 2016

As the inventory costs of repairable items in military logistics continue to increase, many studies for optimal inventory level of these items are being carried out in advanced countries, including the US, to reduce these costs. Research on inventory level optimization for repairable items aimed to achieve the availability goal of a system with a MIME(Multi Indenture Multi Echelon) repair policy structure first began with Sherbrooke's METRIC and developed into various types. This research is to analyze and compare recent V-METRIC related studies to search for another variation in this field. This paper mainly looks at how to determine optimum inventory level for each repairable item to achieve a specific availability target within a limited budget, and also how to minimize inventory cost while achieving its availability target by determining optimal inventory level of each repairable item.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.361-363
• /
• 2011

MFOD(Multi-Fuction Observation Devices) must be observed and measured the distance of the target with laser rangefinder, as well as satellite navigation devices and magnetic north by taking advantage of measuring the exact coordinates of the target is a portable observation. In this paper, it suggests for the multi-function observational study concepts of honor for the optimal design through the highest performance and lightest weight on how to implement the approach in theory.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1275-1283
• /
• 2014

Characteristics of PCM(Pulse Code Modulation) waveform are suitable for target tracking. Especially in terms of dwell time, it is desirable to detect and track a moving target with the single PCM waveform for a MFR(Multi-Function Radar) which carries out multiple tasks. General PCM waveform processing includes Doppler filter bank caused by the characteristics of ambiguity function, to detect target and estimate Doppler frequency, which induces hardware burden and computational complexity. We propose a ML(Maximum Likelihood) based Doppler estimator for a PCM waveform, which is the closed form suboptimal solution and computationally efficient to estimate Doppler frequency and detect a moving target.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.2
• /
• pp.237-245
• /
• 2003

MDS(multi-dimensional scaling) for preference data is a graphical tool which usually figures out how consumers recognize, evaluate certain products. This article is mainly concerned with an optimal scaling for MDS when target configuration is available. Rotation of axis and SUR(seemingly unrelated regression) methods are employed to get a new configuration which is obtained as close to the target as we can. Methodologies developed here are also illustrated via a real data set.