• 소음진동
• /
• 제8권3호
• /
• pp.485-493
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithms. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popularalgorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer simulations and experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.447-450
• /
• 2003

This paper concerns on application of active magnetic bearing(AMB) system to levitate the elevation axis of an electro-optical sight mounted on moving vehicles. In such a system. it is desirable to retain the elevation axis within the predetermined air-gap while the vehicle is moving. A disturbance compensation control is proposed to reduce the base motion response. In the consideration of the uncertainty of the system model, a filtered-x least-mean-square(FXLMS) algorithm is used to estimate adaptively the frequency response function of the feedforward control which cancels disturbance responses. The frequency response function is fitted to an optimal feedforward control. Experimental results demonstrate that the proposed control reduces the air-gap deviation to 27.7% that by feedback control alone.

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.239-246
• /
• 2003

Application of the filtered-x Least Mean Square(LMS) adaptive filter to active noise control requires to estimate the transfer characteristics between the output and the error signal of the adaptive controller. In this paper, we derive the filtered-x adaptive noise control algorithm and analyze its convergence behavior when the acoustic noise consists of multiple sinusoids. The results of the convergence analysis of the filtered-x LMS algorithm indicate that the effects of the parameter estimation inaccuracy on the convergence behavior of the algorithm are characterized by two distinct components Phase estimation error and estimated gain. In particular, the convergence is shown to be strongly affected by the accuracy of the phase response estimate. Simulation results are presented to support the theoretical convergence analysis.

• 융합신호처리학회논문지
• /
• 제7권3호
• /
• pp.130-135
• /
• 2006

원형관의 닥트를 사용하여 1 차원 구동원으로써 라우드스피커와 환기용 팬을 사용하여 각종 알고리즘인 X-LMS 알고리즘과 Filtered-U 알고리즘 그리고 Full-Feedback Filtered-U 알고리즘으로 구성한 DSP 적응필터를 작동시켜 닥트에 적용할 수 있는 능동소음 제어시스템 실현의 가능성에 대하여 여러 가지 실험을 하였다. 1 차 구동원을 환기용 팬을 사용할 때 2 차 제어용 신호가 환기용 팬에 가까이 있는 탐지 마이크로폰에 혼입되는 현상을 고려한 Full-Feedback Filtered-U LMS 알고리즘을 능동제어 시스템에 적용하여 적응제어 필터를 작동하면 시스템이 발산되지 않고 안정상태에서 주파수 범위 170-250Hz 사이에서 다른 알고리즘에 비하여 소음량이 최대치에서 10dB 정도 감소되었다.

• 한국음향학회지
• /
• 제35권4호
• /
• pp.280-287
• /
• 2016

본 논문에서는 다채널 능동 소음 제어를 위한 적응 필터에 적용할 수 있는 정규화된 FxLMS(Filtered-x Least Mean Square) 알고리즘을 제안하였다. 단일 채널 능동 소음 제어를 위한 FxLMS 알고리즘의 경우는 기존의 NLMS(Normalized Least Mean Square) 알고리즘과 같은 방식으로 정규화할 수 있는 반면, 다채널 능동 소음 제어의 경우에는 단일 채널 방식의 정규화 알고리즘을 그대로 적용할 수 없다. 먼저, 최소 교란 원리에 근거한 일반화된 정규화 알고리즘을 이용하여, 역행렬 연산을 피하기 위하여 대각 성분만을 고려한 정규화 알고리즘을 제안하였다. 컴퓨터 모의 실험을 통하여 제안된 알고리즘을 정규화되지 않은 기존의 알고리즘들과 비교하였다. 제안된 알고리즘이 정규화되지 않은 기존의 알고리즘에 비하여 비정상 환경에서 우수한 성능을 가진다는 것을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.402-407
• /
• 1994

유연한 구조물의 진동문제에 대해 Filtered-X LMS 알고리즘을 이용한 제어계를 구성하고 디지탈 신호처리보드를 이용하여 실시간 제어를 수행하였다. 엑추에이터는 피에조 세라믹을 사용하였고 정현파 및 잡색잡음 가진 형태의 외란을 가하였다. 실험결과 1차 고유주파수에서 7dB 이상의 진동저감을 할 수 있었으며 관심 주파수영역 내에서 진동이 고르게 저감되었다.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.111-116
• /
• 2013

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The objective of this paper is to propose ANC(active noise cancellation)-based road traffic noise reduction algorithm-model which can reduce noise by generating frequency opposed to noise sources to improve and complement the problem that existing physical form of a noise barrier. In this paper, we measured the noise characteristic from collection of two difference car noise also ANC simulation has been performed by using road traffic noises input. In order to compare the control performance, we performed noise reduction simulation of ANC by filtered-X LMS algorithm and delayed control signal injection. As a result of this simulation, we confirmed that convergence performance and noise decrease effect to the filtered-X LMS algorithm by inputting the road traffic noise.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.107-113
• /
• 1997

This paper presents the active control of a flexible cantilever beam vibration. The cantilever beam was excitied by a steady-state harmonic and white noise point force and the control was performed by one piezo ceramic actuator bonded to the surface of the beam. An adaptive controller based on filtered-x LMS algorithm was used and the controller was defined by minimizing the square of the response of error sensor. In the experiment, gap sensor was used as an error sensor while the sinusoidal or white noise was applied as a disturbance. In the case of sinusoidal input, more than 20 dB of vibration reduction was achieved over all range of the natural frequencies and it takes 5 seconds to control the vibration at first natural frequency and 1 second at other natural frequencies. In the case of white noise input, 7 dB of vibration reduction was achieved at the first natural frequency and good control performance was achieved in the considered whole frequency range. Results indicate that the vibration of a flexible cantilever beam could be controlled effectively when the piezo ceramic actuator was used with filtered-x LMS algorithm.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1390-1397
• /
• 2000

This paper presents the multi-channel active vibration control of a flexible plate of the acoustically loaded enclosure. The flexible plate was excited acoustically with sinusoidal and white noise input. The control was performed by two piezo ceramic actuators and two accelerometers. The experimental results were compared with the single channel control results. In the case of white noise input, 20 dB of vibration reduction was achieved below 300Hz frequency range. The experimental results demonstrate that multi-channel filtered-x LMS algorithm is effective than single-channel filtered-x LMS algorithm in active vibration control of plate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.993-995
• /
• 1996

This paper proposes an adaptive Filtered-X LMS algorithm with robustness. The proposed system updates filter parameters to keep the performance even if the conventional Active Noise Control (ANC) system well does not work. As a result of the computer simulation, the proposed system has all the advantage of the system using the conventional Filtered-X LMS algorithm. Also some results from the proposed algorithm present that the system is stable when the Adaptive filter does not work. Therefore, the proposed system using the Adaptive Filtered-X LMS algorithm must have much advantage than the system using the conventional algorithm in the side of the stability and performance.