• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.89-89
• /
• 2011

한 유역에서 유출 모형의 성공을 좌우할 수 있는 중요한 요소 중 하나는 강수 손실량(precipitation loss)을 결정하는 것이다. 손실량은 홍수 예측이나 수자원 평가를 위한 유출 모형의 주요 입력 자료가 된다. 만족할 만한 유출 모형을 구현하기 위해서는 손실량의 정확한 평가가 요구된다(Najafi, 2003). 총 강우량 중에서 손실량을 뺀 초과 강우량 또는 유효 강우량은 치수적 측면이든 이수적 측면에서 요구되는 직접 유출량(direct runoffs)에 상당하는 규모로서 유출 모형에서 매우 중요하다. 이제까지 많은 경우에 직접 유출되는 유효 강수량은 총강수량에서 주요 손실량 성분인 침투량을 감하여 산출하여 왔다. 이 때 침투량은 호우사상별로 적게는 유출량의 30%에서 많게는 100%까지 차지할 만큼 주요한 손실 성분으로 취급되었다(Chow, 1964 ; Singh, 1989). 침투량을 산정하기 위한 기존 모형내 포함되는 매개변수 값은 실용적으로 잘 정립되지 않았기 때문에 유출 모형에 실제 적용하는데 어려움이 있다. 한편 침투량 산정 모형 중에 Horton 모형은 가장 잘 알려져 있는 모형 중 하나이다(Horton, 1939 ; 1940). 후속 성과(Blake et al., 1968; Rawls et al., 1976)은 있었지만 모형내 매개변수 값을 결정해야 하는 실용상의 어려운 점이 있다(Singh, 1989). 그리고 국내 초과 강수량 산출 모형에 관한 연구사례가 다수(조홍제,1986; 남선우와 최은호, 1990; 정성원과 김승, 1991; 안태진 등, 2000; 박햇님과 조원철, 2002; 유주환, 2006) 있었지만 시간적으로 연속함수를 갖는 Horton 침투 모형을 실무적으로 이산화 하여 적용할 수 있도록 하는 방법의 절차 및 원칙이 제시되지 않아 유출 모형에 직접 적용하기 쉽지 않은 형편이다. 이에 본 발표에서는 한 유역에서 Horton 매개변수를 결정한 기존 연구(2006, 유주환)의 성과를 적용한 Horton 침투모형을 강수사상별 이산화한 시간별로 적용하는 절차와 적용 원칙을 소개하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.179-196
• /
• 1986

In this paper, the peformance of a statistical packet voice/data multiplexer is studied. In ths study we assume that in the packet voice/data multiplexer two separate finite queues are used for voice and data traffics, and that voice traffic gets priority over data. For the performance analysis we divide the output link of the multiplexer into a sequence of time slots. The voice signal is modeled as an (M+1) - state Markov process, M being the packet generation period in slots. As for the data traffic, it is modeled by a simple Poisson process. In our discrete time domain analysis, the queueing behavior of voice traffic is little affected by the data traffic since voice signal has priority over data. Therefore, we first analyze the queueing behavior of voice traffic, and then using the result, we study the queueing behavior of data traffic. For the packet voice multiplexer, both inpur state and voice buffer occupancy are formulated by a two-dimensional Markov chain. For the integrated voice/data multiplexer we use a three-dimensional Markov chain that represents the input voice state and the buffer occupancies of voice and data. With these models, the numerical results for the performance have been obtained by the Gauss-Seidel iteration method. The analytical results have been verified by computer simylation. From the results we have found that there exist tradeoffs among the number of voice users, output link capacity, voic queue size and overflow probability for the voice traffic, and also exist tradeoffs among traffic load, data queue size and oveflow probability for the data traffic. Also, there exists a tradeoff between the performance of voice and data traffics for given inpur traffics and link capacity. In addition, it has been found that the average queueing delay of data traffic is longer than the maximum buffer size, when the gain of time assignment speech interpolation(TASI) is more than two and the number of voice users is small.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2014

CPS (cyber-physical systems) which consists of connected and diverse embedded systems and physical systems are a new paradigm. Traditional systems were usually considered to be passive and dumb parts in physical systems, but with CPS, we have to take into account what are being moved or changed in the physical systems. So, as increasing the complexity of CPS, potential errors in the systems also increase. In this paper, for enhancing the reliability of CPS, we exploit an executable-model-based design methodology and propose a distributed simulation method to verify the design of CPS. For the design of the systems including discrete and continuous factors, we apply DEV&DESS formalism and simulate models in distributed simulation environments through DDS middleware. We also illustrate the applications of CPS with our modeling tool.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.697-708
• /
• 1996

In this paper, we study reactive congestion control with priority in ATM network. The priority schemes for buffer access, partial buffer sharing have been investigated in order to improve the utilization of ATM network resources the network and to satisfy the most demanding traffic class. We consider in this paper a discrete-time queueing model for partial buffer sharing with two Markov modulated Poisson inputs. This model can be used to analyze the the effects of the partial buffer sharing priority scheme on system performance for realistic cases of bursty services. Explicit formulae are derived for the number of cells in the system and the loss probabilities for the traffic. Congestion may still occur because of unpredictable statistical fluctuation of traffic sources even when preventive control is performed in the network. In this Paper, we study reactive congestion control, in which each source changes its cell emitting rate a daptively to the traffic load at the switching node. Our intention is that,by incorporating such a congcstion control method in ATM network,more efficient congsestion control is established. We develope an analytical model,and carry out an approximateanalysis of reactive congestion con-trol with priority.Numerical results show that several orders of magnitude improvement in the loss probability can be achieved for the high priority class with little impact on the low priority class performance.And the results show that the reactive congestion control with priority are very effective in avoiding congestion and in achieving the statistical gain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2005

In this paper, the effect of various regression models is investigated on structural optimization using the central composite method. Three bar truss and the upper platform of a satellite are optimized using various regression models that are polynomial, exponential and log functions. Response surface method is non-gradient, semi-global, discrete and fast converging in optimization problem. Sampling points are extracted by the design of experiments using the central composite method. Response surface is generated using the various regression functions. Structural analysis for calculating constraints is executed to find static and dynamic responses. From this study, it is verified that the response surface method has advantage in optimum value and computation time in comparison to other optimization methods.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.81-102
• /
• 2010

The present study analyzes the choice factors and possibility of traditional and other competing markets through consumer behavior analyses in order to suggest factors that can help reactivate traditional markets. Hence, Multinomial Logit Model is used as it is an optimum model to understand discrete selection. The results suggested some tendencies regarding traditional market. For example, traditional market is more activated when the market is large and has more parking spaces, and when the level of consumer satisfaction is high. While, increased travel distance and time have negative effects on visitor's choice. Governmental supports are turned out to have less to do with the consumer attraction. People with higher incomes tend to prefer other types of market. The results also suggested there is more likelihood of traditional markets being reactivated if the market is not fiercely competing with other types of markets. Internet market is ranked top in consumer's choice possibility, while traditional market is ranked at the bottom. The plausible factors to reactivate traditional market were physical factors(including increasing shops and parking facilities), which is followed by governmental support.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.113-129
• /
• 1999

It is widely recognized that the value of travel time (VOT) plays an important role both in choosing the transportation alternatives on an individual level, and in analyzing and evaluating transportation plans and other public policy makings on a collective level. There is, however, a great deal of difficulties to correctly estimate the VOT. In addition, although there are lots of methods to estimate the VOT so for, not many recommendations have been presented to reflect the localities associated with the VOT derivation in Korea. This study aims at deriving the VOT for different trip purposes and travel modes with their significances tested. To accomplish this purposes, a logit-based travel mode choice model based on revealed preference (RP) data has been formulated, calibrated using the discrete choice model of LIMDEP package for various trip purpose models. For each trip purpose and travel mode, the VOT has been calculated along with the significance testing of the derived VOTs. From the results given in this research, the VOTs for different purposes and modes are identified different, and they are statistically significant. The updated results here in this paper may be a yardstick in evaluating the transportation plans and policies by providing more detailed VOT information for different categories, especially in urban context.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3940-3955
• /
• 2023

A new method of numerical simulating prediction and decontamination effect evaluation for abrasive jet decontamination to radioactively contaminated metal is proposed. Based on the Computational Fluid Dynamics and Discrete Element Model (CFD-DEM) coupled simulation model, the motion patterns and distribution of abrasives can be predicted, and the decontamination effect can be evaluated by image processing and recognition technology. The impact of three key parameters (impact distance, inlet pressure, abrasive mass flow rate) on the decontamination effect is revealed. Moreover, here are experiments of reliability verification to decontamination effect and numerical simulation methods that has been conducted. The results show that: ⁶⁰Co and other homogeneous solid solution radioactive pollutants can be removed by abrasive jet, and the average removal rate of Co exceeds 80%. It is reliable for the proposed numerical simulation and evaluation method because of the well goodness of fit between predicted value and actual values: The predicted values and actual values of the abrasive distribution diameter are Ф57 and Ф55; the total coverage rate is 26.42% and 23.50%; the average impact velocity is 81.73 m/s and 78.00 m/s. Further analysis shows that the impact distance has a significant impact on the distribution of abrasive particles on the target surface, the coverage rate of the core area increases at first, and then decreases with the increase of the impact distance of the nozzle, which reach a maximum of 14.44% at 300 mm. It is recommended to set the impact distance around 300 mm, because at this time the core area coverage of the abrasive is the largest and the impact velocity is stable at the highest speed of 81.94 m/s. The impact of the nozzle inlet pressure on the decontamination effect mainly affects the impact kinetic energy of the abrasive and has little impact on the distribution. The greater the inlet pressure, the greater the impact kinetic energy, and the stronger the decontamination ability of the abrasive. But in return, the energy consumption is higher, too. For the decontamination of radioactively contaminated metals, it is recommended to set the inlet pressure of the nozzle at around 0.6 MPa. Because most of the Co elements can be removed under this pressure. Increasing the mass and flow of abrasives appropriately can enhance the decontamination effectiveness. The total mass of abrasives per unit decontamination area is suggested to be 50 g because the core area coverage rate of the abrasive is relatively large under this condition; and the nozzle wear extent is acceptable.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.96-105
• /
• 1998

The aim of this paper is to propose the method of WDHMM(Weighted DHMM), using the MLP-VQ for the improvement of speaker-independent connect-digit recognition system. MLP neural-network output distribution shows a probability distribution that presents the degree of similarity between each pattern by the non-linear mapping among the input patterns and learning patterns. MLP-VQ is proposed in this paper. It generates codewords by using the output node index which can reach the highest level within MLP neural-network output distribution. Different from the old VQ, the true characteristics of this new MLP-VQ lie in that the degree of similarity between present input patterns and each learned class pattern could be reflected for the recognition model. WDHMM is also proposed. It can use the MLP neural-network output distribution as the way of weighing the symbol generation probability of DHMMs. This newly-suggested method could shorten the time of HMM parameter estimation and recognition. The reason is that it is not necessary to regard symbol generation probability as multi-dimensional normal distribution, as opposed to the old SCHMM. This could also improve the recognition ability by 14.7% higher than DHMM, owing to the increase of small caculation amount. Because it can reflect phone class relations to the recognition model. The result of my research shows that speaker-independent connected-digit recognition, using MLP-VQ and WDHMM, is 84.22%.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.663-672
• /
• 2002

In this paper, Using an automatic tracking system, behavior of an aquatic insect, Chironomus sp. (Chironomidae), was observed in semi-natural conditions in response to sub-lethal treament of a carbamate insecticide, carbofuran. The fourth instar larvae were placed in an observation cage $(6cm\times{7cm}\times{2.5cm)}$ at temperature of $18^\circ{C}$ and the light condition of 10 time (light) : 14 time (dark). The tracking system was devised to detect the instant, partial movement of the insect body. Individual movement was traced after the treatment of carbofuran (0.1ppm) for four days 2days : before treatment, 2 days : after treatment). Along with the other irregular behaviors, "ventilation activity", appearing as a shape of "compressed zig-zag", was more frequently observed after the treatment of the insecticide. The activity of the test individuals was also generally depressed after the chemical treatment. In order to detect behavioral changes of the treated specimens, wavelet analysis was implemented to characterize different movement patterns. The extracted parameters based on Discrete Wavelet Transforms (DWT) were subsequently provided to artificial neural networks to be trained to represent different patterns of the movement tracks before and after treatments of the insecticide. This combined model of wavelets and artificial neural networks was able to point out the occurrence of characteristic movement patterns, and could be an alternative tool for automatically detecting presences of toxic chemicals for water quality monitoring. quality monitoring.