• Title/Summary/Keyword: a battery

Search Result 4,606, Processing Time 0.039 seconds

Electrochemical Properties of Pyrolytic Carbon and Boron-doped Carbon for Anode Materials In Li-ion Secondary Batteries (리튬 이온 이차전지 부극용 열분해 탄소 및 붕소첨가 탄소의 전기화학적 특성)

  • Kwon, Ik-Hyun;Song, Myoung-Youp;Bang, Eui-Yong;Han, Young-Soo;Kim, Ki-Tae;Lee, Jai-Young
    • Journal of the Korean Electrochemical Society
    • /
    • v.5 no.1
    • /
    • pp.30-38
    • /
    • 2002
  • Disordered carbon and boron-substituted disordered carbons $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ were synthesized by Pyrolysis of LPG(liquid Propane gas)and $BCl_3$. Their electrochemical properties as anode materials for Li-ion secondary batteries were then investigated. When PVDF is added to the sample in a weight ratio 5 : 95, the disordered carbon with x=0.00 had the first discharge capacity 374 mAh/g. Its cycling performance was relatively good from the second cycle and it had the discharge capacity 258 mAh/g at the 10th cycle. When PVDF is added to the sample in a weight ratio 5 : 95, the sample with x=0.05 among the samples $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ exhibited the largest first discharge capacity 860 mAh/g and discharge capacity 181 mAh/g at the 10th cycle. All the samples had similar cycling performances from the second cycle. The sample $C_{0.90}B_{0.10}$ showed the best electrochemical properties as a anode materials fur Li-ion secondary battery from the view points of the first discharge capacity(853 mAh/g when $10w1.\%$ PVDF is used), cycling performance, discharge capacity(400mAh/g at the 10th cycle when $10wt.\%$ PVDF is used). All the samples showed generally larger charge and discharge capacities when $10wt.\%$ PVDF ratter than $5wt.\%$ PVDF is used. The plateau region in the range of voltage lower than 1.25V becomes larger probably since the structure becomes less disordered by the addition of boron. When boron is added, the charge and discharge capacities decreased suddenly at the second cycle. This may be become only a part of Li are reversibly deintercalated and intercalated and a part of Li which are strongly combined with B are not deintercalated. The increases in charge and discharge capacities are considered to be resulted from the increase in the potential of Li in the boron-added carbons, caused by the strengthening of the chemical bond between the intercalated Li and the boron-carbon host since the boron acts as electron acceptor.

Acoustic images of the submarine fan system of the northern Kumano Basin obtained during the experimental dives of the Deep Sea AUV URASHIMA (심해 자율무인잠수정 우라시마의 잠항시험에서 취득된 북 구마노 분지 해저 선상지 시스템의 음향 영상)

  • Kasaya, Takafumi;Kanamatsu, Toshiya;Sawa, Takao;Kinosita, Masataka;Tukioka, Satoshi;Yamamoto, Fujio
    • Geophysics and Geophysical Exploration
    • /
    • v.14 no.1
    • /
    • pp.80-87
    • /
    • 2011
  • Autonomous underwater vehicles (AUVs) present the important advantage of being able to approach the seafloor more closely than surface vessel surveys can. To collect bathymetric data, bottom material information, and sub-surface images, multibeam echosounder, sidescan sonar (SSS) and subbottom profiler (SBP) equipment mounted on an AUV are powerful tools. The 3000m class AUV URASHIMA was developed by the Japan Agency for Marine-Earth Science and Technology (JAMSTEC). After finishing the engineering development and examination phase of a fuel-cell system used for the vehicle's power supply system, a renovated lithium-ion battery power system was installed in URASHIMA. The AUV was redeployed from its prior engineering tasks to scientific use. Various scientific instruments were loaded on the vehicle, and experimental dives for science-oriented missions conducted from 2006. During the experimental cruise of 2007, high-resolution acoustic images were obtained by SSS and SBP on the URASHIMA around the northern Kumano Basin off Japan's Kii Peninsula. The map of backscatter intensity data revealed many debris objects, and SBP images revealed the subsurface structure around the north-eastern end of our study area. These features suggest a structure related to the formation of the latest submarine fan. However, a strong reflection layer exists below ~20 ms below the seafloor in the south-western area, which we interpret as a denudation feature, now covered with younger surface sediments. We continue to improve the vehicle's performance, and expect that many fruitful results will be obtained using URASHIMA.

Synthesis and Structure of the Layered Cathode Material $Li[Li_xMn_{1-x-y}Cr_y]O_2$ for Rechargeable Lithium Batteries (리튬2차전지용 양극 소재 $Li[Li_xMn_{1-x-y}Cr_y]O_2$의 합성 및 층상구조 연구)

  • 최진범;박종완;이승원
    • Journal of the Mineralogical Society of Korea
    • /
    • v.16 no.3
    • /
    • pp.223-232
    • /
    • 2003
  • The co-precipitation method is applied to synthesize the cathode material Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$ for lithium rechargeable batteries at $650^{\circ}C$ (CR650) and 8$50^{\circ}C$ (CR850), respectively. Rietveld indices indicate that $R_{wp}$ with respect to $R_{exp}$ ( $R_{wp}$/ $R_{exp}$) are 9.2%/10.1% for CR650 and 15.9%/9.76% for CR850, respectively. $R_{B}$ and S (GofF) shows 10.9%, 8.54% and 1.9, 1.6, respectively. Rietveld structure refinement reveals that layer structure of LiMn $O_2$ (R3m) coexists with lower symmetry of Li[L $i_{1}$3/M $n_{2}$3/] $O_2$ (C2/c) due to superlattice ordering of Li and Mn in metal-transition containing layers. Unit-cell parameters are calculated as a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(l)$\AA^3$ for CR650, and a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$ for CR850. Final chemistry is obtained as Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$ (CR650) and Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$ (CR850), respectively.y...y..vely.y...y..

Study on the screening method for determination of heavy metals in cellular phone for the restrictions on the use of certain hazardous substances (RoHS) (유해물질 규제법(RoHS)에 따른 휴대폰 내의 중금속 함유량 측정을 위한 스크리닝법 연구)

  • Kim, Y.H.;Lee, J.S.;Lim, H.B.
    • Analytical Science and Technology
    • /
    • v.23 no.1
    • /
    • pp.1-14
    • /
    • 2010
  • It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.

Reliability and Validity of the Fatigue Severity Scale among University Student in South Korea (대학교 재학생에서 Fatigue Severity Scale의 신뢰도 및 타당도 연구)

  • Lee, Junghyun H.;Jeong, Hyeonseok S.;Lim, Soo Mee;Cho, Han Byul;Ma, Ji-Young;Ko, Eun;Im, Jooyeon J.;Lee, Sun Hea;Bae, Sujin;Lee, Yu-Jin;Lyoo, In Kyoon;Jeong, Do-Un
    • Korean Journal of Biological Psychiatry
    • /
    • v.20 no.1
    • /
    • pp.6-11
    • /
    • 2013
  • Objectives There are only a limited number of studies on instruments assessing fatigue in university students, although fatigue exerts negative influences on their health and academic performances and fatigue-related complaints are more frequently reported in young adults than middle-aged adults. The aim of this study was to validate the 9-item Fatigue Severity Scale (FSS) among university students including both undergraduate and graduate students in South Korea. Methods A total of 176 university students completed a battery of self-report questionnaires, including the FSS, the Brief Fatigue Inventory (BFI), the Beck Depression Inventory-II (BDI-II), the Beck Anxiety Inventory (BAI), the Medical Outcomes Study Short Form 36 version 2 (MOS-SF36v2), and the Inclusion of Community in the Self Scale (ICS). The data were collected from February of 2012 to June of 2012. The reliability, convergent validity, divergent validity, and exploratory factor analyses were conducted to assess psychometric properties of the FSS. Results The mean FSS score was 3.20 (standard deviation = 1.43). The FSS demonstrated an excellent internal consistency (Cronbach's ${\alpha}$ = 0.93) and item-total correlations ranged from 0.56 to 0.90. Correlations of the FSS with the BFI (r = 0.71, p < 0.01), BDI-II (r = 0.54, p < 0.01), BAI (r = 0.46, p < 0.01), MOS-SF36v2 physical component summary (r = -0.28, p < 0.01), MOS-SF36v2 mental component summary (r = -0.55, p < 0.01), and ICS (Spearman's rho = -0.07, p = 0.33) showed acceptable convergent and divergent validity. Exploratory factor analysis defined one underlying factor (eigenvalue = 5.67) that explained 93.50% of the total variance. Conclusions To the best of our knowledge, this is the first study to investigate reliability and validity of the FSS in university students. The FSS exhibits good psychometric properties for evaluation of fatigue among university students in South Korea. Since the FSS is easy to administer, score, and interpret, it could be a useful tool in research and practice for assessing fatigue among university students.

Analyses of the Studies on Cancer-Related Quality of Life Published in Korea (암 환자 삶의 질에 대한 국내 연구논문 분석)

  • Lee Eun-Hyun;Park Hee Boong;Kim Myung Wook;Kang Sunghee;Lee Hye-Jin;Lee Won-Hee;Chun Mison
    • Radiation Oncology Journal
    • /
    • v.20 no.4
    • /
    • pp.359-366
    • /
    • 2002
  • Purpose : The purpose of the present study was to analyze and evaluate prior studies published in Korea on the cancer-related quality of life, in order to make recommendations for further research. Materials and Methods : A total of 31 studies were selected from three different databases. The selected studies were analyzed according to 11 criteria, such as site of cancer, domain, independent variable, research design, self/proxy rating, single/battery instrument, translation/back translation, reliability, validity, scoring, and findings. Results : Of the 31 studies, approximately half of them were conducted using a mixed cancer group of patients. Many of the studies asserted that the concept of quality of life had a multidimensional attribute. Approximately 30% were longitudinal design studies giving information about the changes in quality of life. In all studies, except one, patients directly rated their level of quality of life. With respect to the questionnaires used for measuring the quality of life, most studies did not consider whether or not their reliability and validity had been established. In addition, when using questionnaires developed in other languages, no studies employed a translation/ back-translation technique. All studies used sum or total scoring methods when calculating the level of quality of life. The types of variables tested for their influence on qualify of life were quite limited. Conclusion : It is recommended that longitudinal design studies be peformed, using methods of data collection whose validity and reliability has been confirmed, and that studies be conducted to identify new variables having an influence on the quality of life.

Study on Ti-doped LiNi0.6Co0.2Mn0.2O2 Cathode Materials for High Stability Lithium Ion Batteries (고안정성 리튬이온전지 양극활물질용 Ti 치환형 LiNi0.6Co0.2Mn0.2O2 연구)

  • Jeon, Young Hee;Lim, Soo A
    • Journal of the Korean Electrochemical Society
    • /
    • v.24 no.4
    • /
    • pp.120-132
    • /
    • 2021
  • Although the development of high-Nickel is being actively carried out to solve the capacity limitation and the high price of raw cobalt due to the limitation of high voltage use of the existing LiCoO2, the deterioration of the battery characteristics due to the decrease in structural stability and increase of the Ni content. It is an important cause of delaying commercialization. Therefore, in order to increase the high stability of the Ni-rich ternary cathod material LiNi0.6Co0.2Mn0.2O2, precursor Ni0.6Co0.2Mn0.2-x(OH)2/xTiO2 was prepared using a nanosized TiO2 suspension type source for uniform Ti substitution in the precursor. It was mixed with Li2CO3, and after heating, the cathode active material LiNi0.6Co0.2Mn0.2-xTixO2 was synthesized, and the physical properties according to the Ti content were compared. Through FE-SEM and EDS mapping analysis, it was confirmed that a positive electrode active material having a uniform particle size was prepared through Ti-substituted spherical precursor and Particle Size Analyzer and internal density and strength were increased, XRD structure analysis and ICP-MS quantitative analysis confirmed that the capacity was effectively maintained even when the Ti-substituted positive electrode active material was manufactured and charging and discharging were continued at high temperature and high voltage.

Effects of Visiting Prehabilitation Program against Functional Decline in the Frail Elderly: A Prospective Randomized Community Trial (허약노인을 위한 방문재활 프로그램의 장애발생예방 효과에 대한 연구)

  • Kim, Chang-O;Lee, Heeyeon;Ho, Seung Hee;Park, Hyunsuk;Park, Chulwoo
    • 한국노년학
    • /
    • v.30 no.4
    • /
    • pp.1293-1309
    • /
    • 2010
  • This study is aimed to evaluate the effects of community-based prehabilitation program developed to prevent functional decline in the frail elderly and to provide a basis to practically operate this program in the public health care service. From March to August 2009, 110 frail elderly people were recruited among the registered participants of the home visit program in Korea to perform a prospective randomized community trial. We randomly assigned these people into two groups. One group (n=50) participated in the visiting prehabilitation program for 3 months focusing on improving their muscle strength of upper and lower limbs, walking ability, and balancing. The other group (n=60) underwent our visiting fall prevention program for control. To assess the effectiveness of prehabilitation program, physical functioning (PF) and short physical performance battery (SPPB) were measured for the primary outcomes and also some other indicators: exercise performance, nutritional status, emotional functioning, experience of admission, and events of fall. As a result, significant improvements of geriatric functional status were noticed among the participants. After 3 months, PF increased by 1.3 ± 3.8 points in prehabilitation group and decreased by 1.1 ± 5.4 points in controls (p=.020). SPPB improved by 2.4 ± 2.0 points in prehabilitation group and increased only 0.3 ± 1.5 points in controls (p<.001). Significant effects were also shown in their exercise performance tests and emotional status, the number of multiple falls, and the experience of functional decline after the fall (p .002-.038). Visiting prehabilitation program is safe and effective program for frail older adults. Thus, it is strongly recommended to universally adopt this program to prevent functional decline in the frail elderly.

Ensemble of Nested Dichotomies for Activity Recognition Using Accelerometer Data on Smartphone (Ensemble of Nested Dichotomies 기법을 이용한 스마트폰 가속도 센서 데이터 기반의 동작 인지)

  • Ha, Eu Tteum;Kim, Jeongmin;Ryu, Kwang Ryel
    • Journal of Intelligence and Information Systems
    • /
    • v.19 no.4
    • /
    • pp.123-132
    • /
    • 2013
  • As the smartphones are equipped with various sensors such as the accelerometer, GPS, gravity sensor, gyros, ambient light sensor, proximity sensor, and so on, there have been many research works on making use of these sensors to create valuable applications. Human activity recognition is one such application that is motivated by various welfare applications such as the support for the elderly, measurement of calorie consumption, analysis of lifestyles, analysis of exercise patterns, and so on. One of the challenges faced when using the smartphone sensors for activity recognition is that the number of sensors used should be minimized to save the battery power. When the number of sensors used are restricted, it is difficult to realize a highly accurate activity recognizer or a classifier because it is hard to distinguish between subtly different activities relying on only limited information. The difficulty gets especially severe when the number of different activity classes to be distinguished is very large. In this paper, we show that a fairly accurate classifier can be built that can distinguish ten different activities by using only a single sensor data, i.e., the smartphone accelerometer data. The approach that we take to dealing with this ten-class problem is to use the ensemble of nested dichotomy (END) method that transforms a multi-class problem into multiple two-class problems. END builds a committee of binary classifiers in a nested fashion using a binary tree. At the root of the binary tree, the set of all the classes are split into two subsets of classes by using a binary classifier. At a child node of the tree, a subset of classes is again split into two smaller subsets by using another binary classifier. Continuing in this way, we can obtain a binary tree where each leaf node contains a single class. This binary tree can be viewed as a nested dichotomy that can make multi-class predictions. Depending on how a set of classes are split into two subsets at each node, the final tree that we obtain can be different. Since there can be some classes that are correlated, a particular tree may perform better than the others. However, we can hardly identify the best tree without deep domain knowledge. The END method copes with this problem by building multiple dichotomy trees randomly during learning, and then combining the predictions made by each tree during classification. The END method is generally known to perform well even when the base learner is unable to model complex decision boundaries As the base classifier at each node of the dichotomy, we have used another ensemble classifier called the random forest. A random forest is built by repeatedly generating a decision tree each time with a different random subset of features using a bootstrap sample. By combining bagging with random feature subset selection, a random forest enjoys the advantage of having more diverse ensemble members than a simple bagging. As an overall result, our ensemble of nested dichotomy can actually be seen as a committee of committees of decision trees that can deal with a multi-class problem with high accuracy. The ten classes of activities that we distinguish in this paper are 'Sitting', 'Standing', 'Walking', 'Running', 'Walking Uphill', 'Walking Downhill', 'Running Uphill', 'Running Downhill', 'Falling', and 'Hobbling'. The features used for classifying these activities include not only the magnitude of acceleration vector at each time point but also the maximum, the minimum, and the standard deviation of vector magnitude within a time window of the last 2 seconds, etc. For experiments to compare the performance of END with those of other methods, the accelerometer data has been collected at every 0.1 second for 2 minutes for each activity from 5 volunteers. Among these 5,900 ($=5{\times}(60{\times}2-2)/0.1$) data collected for each activity (the data for the first 2 seconds are trashed because they do not have time window data), 4,700 have been used for training and the rest for testing. Although 'Walking Uphill' is often confused with some other similar activities, END has been found to classify all of the ten activities with a fairly high accuracy of 98.4%. On the other hand, the accuracies achieved by a decision tree, a k-nearest neighbor, and a one-versus-rest support vector machine have been observed as 97.6%, 96.5%, and 97.6%, respectively.

In vitro Antimutagenic and Genotoxic Effects of Sophora Radix Extracts (고삼추출물의 in vitro 항돌연변이원성과 유전독성 연구)

  • Cho, Hyeon-Jo;Yoon, Hyunjoo;Park, Kyung-Hun;Lee, Je-Bong;Shim, Chang-Ki;Kim, Jin Hyo;Jeong, Mi Hye;Oh, Jin-Ah;Kim, Doo-Ho;Paik, Min-Kyoung
    • The Korean Journal of Pesticide Science
    • /
    • v.17 no.4
    • /
    • pp.335-342
    • /
    • 2013
  • Sophorae radix extract (SRE) has been registered as an environment-friendly organic material that is widely used in the cultivation of crops in Korea. Matrine, the active ingredient in SRE, was reported as a toxic substance in the nervous system in mice. However, no information is available on its toxic effects in other organisms. Therefore, antimutagenicity and two kinds of genotoxicity tests (bacterial reverse mutation and chromosome aberration test) of two samples of SRE were investigated in this study. Antimutagenicity test was experimented by using bacterial reverse mutation test. In the reverse mutation test, Salmonella Typhimurim TA98, TA1535 and TA1537 were used to evaluate the mutagenic potential of SRE. Bacterial reverse mutation test was also performed on positive and negative control groups in the presence of the metabolic activation system (with S-9 mix) and metabolic non-activation system (without S-9 mix). In the chromosome aberration test, Chinese hamster lung cells were exposed to SRE for 6 or 24 hours without S-9 mix, or for 6 hours with S-9 mix. Negative and positive control groups were experimented for chromosome aberration test. As a result, the number of mutated colonies induced by 4-NQO were reduced by SRE treatment in all strains, indicating that SRE may have antimutagenic effects. Reverse mutation was not shown at all concentrations of SRE, regardless of application of the metabolic activation system. In the chromosomal aberration test, one of the SRE sample gave a suspicious positive result at 250 ${\mu}g/ml$ in the presence of S-9 mix. For the more adequate evaluation of the genotoxic potential of SRE samples, other in vivo genotoxicity study is needed.