• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.200-202
• /
• 2004

ZnO thin films were grown at different plume-substrate angles by pulsed laser deposition(PLD). From the X-ray diffraction(XRD) result, all ZnO thin films were found to be well c-axis oriented and c-axis lattice constant approached the value of bulk ZnO as plume-substrate(P-S) angle decreased. The grain size of ZnO thin films measured by atomic force microscopy increased and the UV intensity of ZnO thin films investigated by photoluminescence increased as P-S angle decreased. It is found that the improvement of structural and optical properties mainly comes from the reduction of the flux of ablated species arriving on a substrate per a laser shot by tilting a substrate parallel to the plume propagation direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.367-368
• /
• 2007

To investigate the 2nO thin films which are interested in the next generation of short wavelength LEDs and Lasers and UV photodetector with p-type inversion layer, the ZnO thin films were deposited by RF sputtering system. Gas ratios and work pressure is Ar : $O_2$ = 4 : 1 and 15 mTorr, respectively, and the purity of ZnO target is 5N. The ZnO thin films were deposited at 300, 450, and $650^{\circ}C$. The current-voltage, responsivity and quantum efficiency of devices were studied and compared with each devices.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.237-243
• /
• 2008

Nano core shell structures of $TiO_2$ particles coated on surface of ZnO nanoparticles were prepared by the polymerized complex and sol-gel method. The average particle size of ZnO by the polymerized complex method showed 100 nm and the average particle size of $TiO_2$ by the sol-gel method showed below 10 nm. The average particle size of $ZnO@TiO_2$ nano core shell struture represented about 150 nm. The agglomeration between the ZnO particles using the polymerized complex method was highly controlled by the uniform absorption of $TiO_2$ colloid on the spherical ZnO surfaces. The driving force of heterogeneous bonding between ZnO and $TiO_2$ was induced by the Coulomb force. The ZnO and $TiO_2$ particles electrified with + and - charges, respectively, resulted in strong bonding by the difference of iso-electric point (IEP) when they laid neutrality pH area, depending on the heterogeneous surface electron electrified by the different zeta potential on the pH values.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.297.2-297.2
• /
• 2013

Scavenging electricity from wasteful energy resources is currently an important issue and piezoelectric nanogenerators (NGs) based on zinc oxide (ZnO) are promising energy harvesters that can be adapted to various portable, wearable, self-powered electronic devices. Although ZnO has several advantages for NGs, the piezoelectric semiconductor material ZnO generate an intrinsic piezoelectric potential of a few volts as a result of its mechanical deformation. As grown, ZnO is usually n-type, a property that was historically ascribed to native defects. Oxygen vacancies (Vo) that work as donors exist in ZnO thin film and usually screen some parts of the piezoelectric potential. Consequently, the ZnO NGs' piezoelectric power cannot reach to its theoretical value, and thus decreasing the effect from Vo is essential. In the present study, c-axis oriented insulator-like sputtered ZnO thin films were grown in various temperatures to fabricate an optimized nanogenerator (NGs). The purity and crystalinity of ZnO were investigated with photoluminescence (PL). Moreover, by introducing a p-type polymer usually used in organic solar cell, it was discussed how piezoelectric passivation effect works in ZnO thin films having different types of defects. Prepared ZnO thin films have both Zn vacancies (accepter like) and oxygen vacancies (donor like). It generates output voltage 20 time lager than n-type dominant semiconducting ZnO thin film without p-type polymer conjugating. The enhancement is due to the internal accepter like point defects, zinc vacancies (VZn). When the more VZn concentration increases, the more chances to prevent piezoelectric potential screening effects are occurred, consequently, the output voltage is enhanced. Moreover, by passivating remained effective oxygen vacancies by p-type polymers, we demonstrated further power enhancement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.102-102
• /
• 2011

ZnO는 우수한 전기적, 광학적 특성으로 LED, solar cell 등과 같은 광전자소자의 응용을 목적으로 많은 연구가 진행되고 있다. 최근에는 ZnO 동종접합을 만들고자 많은 연구가 진행되고 있으나 p형 ZnO의 낮은 용해성과 높은 불순물에 따른 제조의 어려움으로 현재까지는 n형 ZnO만이 전도성 기판 위에 성장되어 응용되고 있다. 전도성 기판으로서 Si의 경우 낮은 가격, 공정의 용이함 등으로 GaN, SiC 등의 기판에 비하여 많은 응용이 가능하다. 따라서 본 연구에서는 전기화학증착법을 이용하여 p-n 접합을 형성하기 위하여 p형 Si 기판 위에 n형 ZnO 나노구조를 성장하고 그 특성을 분석하였다. 전기화학증착법은 낮은 온도 및 간단한 공정과정으로 빠른 성장 속도를 가지고 나노구조를 효과적으로 성장할 수 있는 방식이다. Seed 층 및 열처리에 따른 n형 ZnO 나노구조의 성장 특성 분석을 위하여 radio frequency (RF) magnetron 스퍼터를 사용하여 ZnO 및 Al doped ZnO (AZO) seed 층을 p형 Si 기판 위에 증착 후 다양한 온도로 열처리를 수행하였다. 질산아연(zinc nitrate)과 HMT가 희석된 용액에 KCl 촉매를 일정량 첨가한 후 다양한 공정 온도, 공정시간 및 질산아연의 몰농도를 변화시켜 n형 ZnO 나노구조를 성장하였다. 성장된 나노구조의 특성은 field emission scanning microscopy (FE-SEM), energy dispersive X-ray (EDX), photoluminescence (PL) 등의 장비를 사용하여 구조적, 광학적 특성을 분석하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.419-424
• /
• 2009

ZnO films doped with different contents of indium ($0.1{\sim}10$ at.%) were deposited on Si (111) substrate by Pulsed Laser Deposition (PLD). The structural, electrical and optical properties of the films were investigated using XRD, AFM, Hall and PL measurement. Results showed that un-doped ZnO film had (002) plane as the c-axis orientated growth, whereas indium doped ZnO films exhibited the peak of (002) and the weak (101) plane. In addition, in the indium doped ZnO films, the electron concentration is ten times higher than that of un-doped ZnO film, while the resistivity is ten times lower than that of un-doped ZnO film. The indium doped ZnO films have UV emission about 380 nm and show a red shift with increasing contents of indium. The I-V curve of the fabricated diode show the typical diode characteristics and have the turn on voltage of about 2 V.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.213-213
• /
• 2003

저온소성 가능하며 저 융점유리인 고 투과율의 Pb-free 조성으로서 PDP(Plasma Display panel)의 투명유전체에 응용하고자 P$_2$O$_{5}$-ZnO-RO 계인 인산염 유리의 열적, 광학적성질을 연구하였다. 이 삼원계인 인산염유리계를 PDP의 투명 유전체에 응용하기에는 열적특성에서 문제점이 제기되어, (30-50)P$_2$O$_{5}$ - (20-50)ZnO - (15-45) RO (mol%)계에 유리망목형성제인 A1$_2$O$_3$, SiO$_2$, B$_2$O$_3$등을 첨가하여 열적성질 및 소성후 투광성 등을 조사하였다. 열적특성은 DTA와 TGA를 이용하여 유리전이점(Tg) 및 선팽 창계수(CTE)와 연하점(Ts) 을 측정하였으며, 투광성은 500-58$0^{\circ}C$에서 1시간동안 소성하여 UV-visible spectrometer을 이용하였다 그 결과로, 380-46$0^{\circ}C$의 Tg와 8-$10^{-6}$K의 CTE 및 70-80%의 광투과율을 나타내었다. 이러한 결과는 P$_2$O$_{5}$-ZnO-RO계는 PDP의 투명유전체에 적용하기에는 상당히 높거나 낮은 Tg를 형성하였지만 유리형성제를 수 mol%을 첨가함으로써 적절한 Tg점과 높은 투과율을 얻을 수 있었다.수 있었다.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.613-618
• /
• 2009

We designed new compositions for lead free and low temperature sealing glass frit of $ZnO-V_2O_5-P_2O_5$ system, which can be used for PDP (Plasma Display Panel) or other electronic devices. The $ZnO-V_2O_5-P_2O_5$ system can be used as a sealing material at temperatures even lower than 430$^{\circ}C$. This system, however, showed lower bonding strength with glass substrate compared to commercialized Pb based sealing materials. So, we added $TiO_2$ as a promoter for bonding strength. We examined the effect of $TiO_2$ addition on sealing behaviors of $ZnO-V_2O_5-P_2O_5$ glasses with the data for flow button, wetting angle, temporary & permanent residual stress of glass substrate, EPMA analysis of interface between sealing materials and glass substrate, and bonding strength. As a result, sealing characteristics of $ZnO-V_2O_5-P_2O_5$ system glasses were improved with $TiO_2$ addition, but showed a maximum value at 5 mol% $TiO_2$ addition. The reason for improved bonding characteristics was considered to be the chemical interaction between glass substrate and sealing glass, and structural densification of sealing glass itself.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.156-161
• /
• 2020

In this study, hierarchical mesoporous CuO spheres, ZnO flowers, and heterojunction CuO/ZnO nanostructures were fabricated via a facile hydrothermal method. The as-prepared materials were characterized in detail using various analytical methods such as powder X-ray diffraction, micro Raman spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and transmission electron microscopy. The obtained results are consistent with each other. The H₂S-sensing characteristics of the sensors fabricated based on the CuO spheres, ZnO flowers, and CuO/ZnO heterojunction were investigated at different temperatures and gas concentrations. The sensor based on ZnO flowers showed a maximum response of ~141 at 225 ℃. The sensor based on CuO spheres exhibited a maximum response of 218 at 175 ℃, whereas the sensor based on the CuO/ZnO nano-heterostructure composite showed a maximum response of 344 at 150 ℃. The detection limit (DL) of the sensor based on the CuO/ZnO heterojunction was ~120 ppb at 150 ℃. The CuO/ZnO sensor showed the maximum response to H₂S compared with other interfering gases such as ethanol, methanol, and CO, indicating its high selectivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1057-1061
• /
• 2007

In this study, we investigated the properties of ZnO thin films prepared by layer-by-layer method in RF magnetron sputtering system using AlAs and ZnO targets. Effects of $H_2O_2$ dip prior to thermal treatment were studied as well. Either n-type or p-type films were observed in our study depending on the annealing conditions. It thus indicates the feasibility of arbitrarily modifying the conductivity type. At the same time, it also implies the thermal instabilities of the film properties. Property measurements after stressing the films up to 144 hours showed that thermal variations of properties nay be suppressed by pre-treatment in 30% $H_2O_2$ for 1 min.