• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.165-169
• /
• 2000

A simple method was suggested to calculate the stress intensity factor for a one-sided patched crack with finite thickness. To consider out-of-plane bending effect resulting from the load-path eccentricity, the spring constant as a function of the through-thickness coordinate z was calculated from the stress distribution in the un-cracked plate, ${\sigma}_{yy}(y=0,\;z)$, and the displacement for the representative single strip Joint, $u_y(y=0,\;z)$. The stress Intensity factors were obtained using Rose's asymptotic solution approach and compared with the finite element results. In short crack region, two results had a little difference. However, two results were almost same in long crack region. On the other hand, the stress intensity factor using plane stress assumption was more similar to finite element result than plane strain condition.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.827-831
• /
• 1995

This study was designed to etermine the changes in the degree of conversion for composite resins after heat curing following the methods proposed by Lee & Park(1995). 8-mm diameter hole was made in 1mm teflon plate and one of three types of composites (Charisma, Brilllant, Z100) was placed and light cured for 60seconds. The samples were devided into 3 groups according to the placing composites. After light curing, the samples were separated from the moulds. Using this method, 10 samples were prepared in each group; 5 samples from each group were heat cured according to the methods proposed by manutfactures, These samples were then thinned to 50-$70{\mu}m$ and analysed with a Fourier Transform Infrared Spectrometer. Standard baseline technique was used to calculate the degree of conversion. When the samples were light cured, the degrees of conversion in each groups were 47.1 % (charisma), 53.3% (Z100), and 70.1 % (Brilliant). The degree of conversion after heat curing were; 60.1 % (Charisma), 71.1 % (Z100), and 73.3 % (Brillant). Once the samples were heat cured, there were significant increases in degree of conversion.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.51-58
• /
• 2023

In this study, the displacement dependence, strength, and energy dissipation capacity of the steel rod damper were evaluated. The test variables are the number of steel rod dampers and the lateral deformation prevention details. From test results, it was evaluated that the displacement dependence conditions in the structural design code were satisfied. The maximum strength and energy dissipation capacity increased linearly as the number of steel rod increased. In addition, the maximum strength and energy dissipation capacity were evaluated by more than 20 times increased by using of the lateral deformation prevention details.

• Animal cells and systems
• /
• 제12권1호
• /
• pp.23-33
• /
• 2008

The Zic family is a group of genes encoding zinc finger proteins that are highly expressed in the mammalian cerebellum. Zic genes are the vertebrate homologue of Drosophila pair-rule gene, odd-paired(opa), which plays important roles in the parasegmental subdivision as well as in the visceral mesoderm development of Drosophila embryos. Recent studies on human, mouse, frog, fish and ascidian Zic homologues support that Zic genes are involved in a variety of developmental processes, including neurogenesis, myogenesis, skeletal patterning, and left-right axis establishment. In an effort to explore possible functions of Zic proteins during vertebrate embryogenesis, we initially examined more detailed expression pattern of zebrafish homologue of zic3(zic3z). zic3z transcripts are detected in the neuroectoderm, neural plate, dorsal neural tube, and brain regions including eye field during early embryonic development. Marker DNA studies found that zic3z transcription is modulated by BMP, Wnt, and Nodal signals particularly in the dorsal and vegetal neuroectoderm at gastrula. Interfering with zic3z translation with zic3z-specific morpholino causes abnormal brain formation and expansion of the optic stalk cells. Retinal ganglion cells(RGCs) undergo abnormal neuronal differentiation. These findings suggest that zic3z defines the dorsal and vegetal neuroectoderm to specify brain formation and retinal neurogenesis during early embryonic development.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.32.3-32.3
• /
• 2008

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.765-778
• /
• 2023

This study investigates the free vibration and buckling analyses of isotropic curved plate structures fixed at all ends. The Kirchhoff-Love Plate Theory (KLPT) and Finite Element Method (FEM) are employed to model the curved structure. In order to perform the finite element analysis, a four-node quadrilateral element with 5 degrees of freedom (DOF) at each node is utilized. Additionally, the drilling effect (θ_z) is considered as minimal to satisfy the DOF of the structure. Lagrange's equation of motion is used in order to obtain the first ten natural frequencies and the critical buckling values of the structure. The effects of various radii of curvatures and aspect ratio on the natural frequency and critical buckling load values for the single-bay and two-bay curved frames are investigated within this scope. A computer code based on finite element analysis is developed to perform free vibration and buckling analysis of curved plate frames. The natural frequency and critical buckling load values of the present study are compared with ANSYS R18.2 results. It has been concluded that the results of the present study are in good agreement with ANSYS results for different radii of curvatures and aspect ratio values of both single-bay and two-bay structures.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.475-484
• /
• 2001

The purpose of this study is to investigate the heat transfer augmentation using the perforated plate placed in front of a target plate in an axisymmetric impinging air jet system. The new liquid crystal technique using neural networks with median filtering is used to determine the Nusselt number distributions on the target surface. The experiments were made for the jet Reynolds number (Re) 23,000. The effects of the pitch-to-diameter (p/d1) from 1.5 to 2.5 in the perforated plate, the hole diameter on perforated plate (d1) from 4㎜ to 12㎜, the perforated plate to target surface distance (z/d1) from 1 to 3, and the nozzle-to-target surface distance (L/d) from 2 to 10 on the heat transfer characteristics were experimentally investigated. It was found that when the perforated plate was located between the nozzle exit and the target plate, the average heat transfer rate at the stagnation region corresponding to r/d$\leq$1.0 was increased up to the maximum 2.3 times compared to the case without the perforated plate.

• BMB Reports
• /
• 제43권7호
• /
• pp.468-473
• /
• 2010

Previously, various inhibitors of cell wall synthesis induced the drp35 gene of Staphylococcus aureus efficiently. To determine whether drp35 could be exploited in antistaphylococcal drug discovery, we cloned the promoter of drp35 ($P_d$) and developed different biological assay systems using an engineered S. aureus strain that harbors a chromosomally-integrated $P_d$ - lacZ transcriptional fusion. An agarose-based assay showed that $P_d$ is induced not only by the cell wall-affecting antibiotics but also by rifampicin and ciprofloxacin. In contrast, a liquid medium-based assay revealed the induction of $P_d$ specifically by the cell wall-affecting antibiotics. Induction of $P_d$ by sublethal concentrations of cell wall-affecting antibiotics was even assessable in a microtiter plate assay format, indicating that this assay system could be potentially used for high-throughput screening of new cell wall-inhibiting compounds.

• Journal of Astronomy and Space Sciences
• /
• 제18권2호
• /
• pp.145-152
• /
• 2001

태양의 극자외선 복사를 연구하기 위한 인공위성 탑재용 소형 극자외선 태양망원경의 공학 모형을 설계하였다. 극자외선 태양망원경은 $584.3AA$(He I)과 $629.7AA$(OV)의 두 파장대역에서 태양을 관측하기 위한 목적으로 설계되었다. 광학계는 Ritchey-Chr 샤두 방식이고, 망원경의 유효구경과 유효 초점 거리는 각각 80mm, 640mm이다. 회전 필터 휠을 사용하여 He I과 OV 방출선을 관측할 수 있도록 하였다. 검출기의 MCP (Microchannel Plate)는 채널 길이 대 직경의 비가 40:1인 Z-stack 타입이고, photocathode로서 KBr이 MCP 초점면에 코팅되며, MCP와 CCD는 fiber optic taper로 연결되도록 디자인하였다. 광학계 설계에 대한 분석은 광학계산용 상용 소프트웨어를 이용하였다.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.141-150
• /
• 2018

In this current work a quasi 3D "trigonometric shear deformation theory" is proposed and discussed for the dynamic of thick orthotropic plates. Contrary to the classical "higher order shear deformation theories" (HSDT) and the "first shear deformation theory" (FSDT), the constructed theory utilizes a new displacement field which includes "undetermined integral terms" and presents only three "variables". In this model the axial displacement utilizes sinusoidal mathematical function in terms of z coordinate to introduce the shear strain impact. The cosine mathematical function in terms of z coordinate is employed in vertical displacement to introduce the impact of transverse "normal deformation". The motion equations of the model are found via the concept of virtual work. Numerical results found for frequency of "flexural mode", mode of shear and mode of thickness stretch impact of dynamic of simply supported "orthotropic" structures are compared and verified with those of other HSDTs and method of elasticity wherever considered.