• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.471-477
• /
• 2013

Biochar amendment to agricultural soil is regarded as a promising option to mitigate climate change and enhance soil quality. It could sequester more carbon within the soil system and increase plant yield by changing soil physicochemical characteristics. However, sustainable use of biochar requires comprehensive environmental assessment. In this sense, it is important to measure additional greenhouse gas emission from soils after biochar addition. We investigated emissions of $CO_2$, $N_2O$, and $CH_4$ from incubated soils collected from rice paddy and cultivated grassland after amendment of 3% biochar (wt.) produced from rice chaff. During incubation, soils were exposed to three wet-dry cycles ranging from 5~85% soil gravimetric water content (WC) to investigate the changes in effect of biochar when influenced by different water levels. The $CO_2$ emission was reduced in biochar treatment compared to the control at WC of 30~70% both in rice paddy and grassland soils. This indicates that biochar could function as a stabilizer for soil organic carbon and it can be effective in carbon sequestration. The $N_2O$ emission was also reduced from the grassland soil treated with biochar when WC was greater than 30% because the biochar treated soils had lower denitrification due to better aeration. In the rice paddy soil, biochar addition resulted in decrease in $N_2O$ emission when WC was greater than 70%, while an increase was noted when WC was between 30~70%. This increase might be related to the fact that available nutrients on biochar surface stimulated existing nitrifying bacterial community, resulting in higher $N_2O$ emission. Overall results imply that biochar amendment to agricultural soil can stabilize soil carbon from fast decomposition although attention should be paid to additional $N_2O$ emission when biochar addition is combined with the application of nitrogen fertilizer.

• Korean Journal of Organic Agriculture
• /
• v.23 no.3
• /
• pp.469-480
• /
• 2015

The study was conducted on the effects of time of defoliation on fruit quality of pear (Pyrus pyrifolia Nakai) trees, managing with low-pesticides, and regrowth of stem cuttings in vitro. Treatments included for 40% of uniform defoliation at early-August, end-August, and early-September, as well as control (no defoliation). Defoliation at early-September and control increased growth of water sprouts as well as concentrations of carbohydrates, total nitrogen, and free sugar in one-year old shoots. Defoliation at early-September and control increased fruit yield and mean fruit weight, with high soluble solids content and fruit surface color of $a^*$ observed for both defoliation at end-August and early-September. Defoliation at early-August increased rates of electrolyte leakage in stem cuttings at $-18^{\circ}C$ in vitro. There were no significantly different for germination rates of the cuttings between the treatments at -18 and $-21^{\circ}C$ in vitro, with the highest germination of the cuttings observed for defoliation at early-September and control at $-27^{\circ}C$. Therefore, orchard management should be performed to be minimized for defoliation of the spur leaves until end-August, causing from precipitation and pests.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.529-533
• /
• 2012

In this study, we compare various physicochemical properties of solvent extracted coals obtained at both mild and high temperature conditions. In order to characterize the extraction behavior, experiments were performed using a sub-bituminous coal (Kideco) and a polar solvent (N-methyl-2-pyrrolidinone, NMP), where the extraction temperature and the effect of solvent recycling were evaluated. As the extraction temperature increased up to $350^{\circ}C$, an extraction yield and a calorific value of the extracted coal increased, while an ash content of the extracted coal decreased. FT-IR results revealed that the surface of the coal extracted at $350^{\circ}C$ was found to contain more amide, aromatic ester, and aliphatic ether groups than that at the lower temperatures. The result of MALDI-TOF/MS analysis confirmed that the smaller molecules with 300~500 m/z were extracted at a mild condition, while the bigger molecules in the range of 500~1500 m/z were extracted at the high temperature.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.85-100
• /
• 1996

The Studies were conducted to provide the state of mulberry cultivation and it's development in Banguet province (high land) of Philippines. Philippines initiated the sericulture industry with the technical asistance of Japan in 1974 and established mulberry field and sericultural facilities with technical asistance of Korea in 1990 and 1995. The required average of 100 to 150mm per month is not available during the dry season from December to March. Therefore mulching with grass which is available abundantly in the Philippines should be established to conserve moisture, to control soil erosion, surface ran-off and also to increase the humus content in the soil. In chemical properties of mulberry field, the pH value of soil is 4.7, organic matter 1.6%, and available phosphorus 6ppm. Therefore, all fields should do liming and be applied compost. To improve leaf yield for mulberry planted under partial shade area of pine trees, more pruning of pine tree should be done for good sunshining of mulberry, more liming and compost should be applied to improve acidic soil. To control the leaf roller, DDVP and KAFIL are able to be used. When spraying insecticides to control mulberry insect pests, care should be taken to consider the residual effects of chemicals on the leaf. Leaf should be fed to silkworms only after the leaves are free of any residual effects.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.28-37
• /
• 2020

In this study, the effect of precipitation temperature, ammonium chloride amount and addition method, vanadium and sodium hydroxide content of the solution on the precipitation of ammonium metavanadate were examined by using the sodium vanadate(NaVO₃) solution in alkali region as a starting material. As the pH of solution decreased, the addition amount of ammonium chloride and the vanadium content of the solution increased, the precipitation rate of ammonium metavanadate increased. In this research condition, the basic conditions for obtaining more than 90% of precipitation yield were 10,000mg/L of vanadium content, 2equivalents of ammonium chloride addition, room temperature, and 2 hours of precipitation time. The size of precipitated particles decreased with increasing precipitation rate. Especially when liquid ammonium chloride was injected into the solution, the precipitation rate was the slowest and the particle size of the precipitate was the largest. After the primary precipitation by adding ammonium chloride as a solid, the secondary precipitation was carried out by adding new reactants. At this time, the precipitation with added ammonium chloride solid was not affected by the precipitates present in the solution. However, when liquid ammonium chloride was added, new precipitate was deposited on the surface of the precipitate present in the solution, increasing its size. Due to the difference in ammonium metavanadate solubility to temperature, the precipitation temperature at the vanadium content of 10,000mg/L in the solution affected the precipitation rate of ammonium metavanadate and the precipitation temperature did not affect the precipitation rate at a high concentration of more than 30,000mg/L vanadium content in the solution.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.986-992
• /
• 2011

The alcohol fermentation of apple juice was optimized as a preliminary study for the production of natural apple cider vinegar. To gain an optimal fermentation yield, a central composite design was used to investigate the effects of the independent variables [initial Brix (12/14/16/18/20, $X_1$), fermentation time(48/54/60/66/72h, $X_2$), and fermentation temperature(24/26/28/30/$32^{\circ}C$, $X_3$)] on the dependent variables (alcohol content, reducing sugar, Brix, acidity). The alcohol content was 3.4-6.4%, the reducing sugar was 1.93-6.24%, and the Brix was $6.1-13.8^{\circ}$. The alcohol content was mainly affected by the fermentation temperature and increased along with the fermentation time and temperature. The amount of the reducing sugar was significantly affected by the initial Brix and fermentation temperature. The optimal conditions for the alcohol content were found to be 15.22 initial Brix, 64.97 h fermentation time, and $31.56^{\circ}C$ temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.403-408
• /
• 2006

Fluvio-marine paddy soils in Korea consist of high silt content and have the hardpan located below 20~30 cm from surface soil. This properties cause poor rice rhizosphere conditions such as low permeability and porosity, high bulk density and hardness. The aims of this study was to investigate the effect of popped rice hulls compost(PRHC) on soil fertility changes in the Fluvio-marine plain paddy soils. Total nitrogen content and nitrogen mineralization rate of PRHC were 1.17 and 33.5, respectively, and its C/N ratio was 35.4. Application of PRHC increased the content of organic matter and exchangeable potassium and improved the bulk density and porosity. The content of $NH_4-N$ in soil was high in the PRHC plot until maximum tillering stage. An uptake amount of fertilized nitrogen was greater in standard fertilization plot at early growth stage, however, it was greater more in PRHC plots at the ripening period than in standard fertilization plot. Among the PRHC treated plots, uptake amount was the greatest in 50% PRHC plot during the all growth period. Nitrogen efficiencies were higher in PRHC plot during the all growth period. Rice yields in all PRHC plots were lower than in standard fertilization, however, the yield of 40% PRHC plot was similar with that of standard.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.63-71
• /
• 2019

Objective: The aim of the study was to investigate the effect of zinc-bearing palygorskite (Zn-Pal) on rumen fermentation by in vitro gas-production system. Methods: In trial, 90 incubators were evenly divided into five groups: control (0% Zn-Pal), treatment I (0.2% Zn-Pal), treatment II (0.4% Zn-Pal), treatment III (0.6% Zn-Pal), and treatment IV (0.8% Zn-Pal). The contents of zinc for treatments were 0, 49, 98, 147, 196 mg/kg, respectively. The main chemical composition and microstructure of Zn-Pal was investigated by X-ray diffraction. The physicochemical features were evaluated by Zeta potential analysis, cation-exchange capacity, ethylene blue absorption and specific surface area (the Brunauer-Emmett-Teller method). In vitro gas production (GP) was recorded at 3, 6, 9, 12, 18, 24, 36, 48, 60, and 72 h incubation. Incubation was stopped at 0, 6, 12, 24, 48, and 72 h and the inoculants were tested for pH, microbial protein yield (MCP), $NH_3-N$, volatile fatty acids (VFAs), lipopolysaccharide (LPS). Results: The results showed that the GP in the treatment groups was not significantly different from the control groups (p>0.05). Compared to the control group, pH was higher at 24 h, 48 h (p<0.05), and 72 h (p<0.01) (range 6 to 7). The concentration of $NH_3-N$ in the three treatment groups was higher than in the control group at 24 h (p<0.01), meanwhile, it was lower at 48 h and 72 h (p<0.01), except in the treatment IV. The concentration of MCP in treatment I group was higher than in the control at 48 h (p<0.01). Compared with control, the LPS concentration in treatment III became lower at 12 h (p<0.05). Total VFAs in treatments were higher than in the control at 24 h, 48 h (p<0.05). Conclusion: These results suggest that the addition of Zn-Pal can improve the rumen fermentation, especially when adding 0.2% Zn-Pal.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.159-165
• /
• 2021

The fiber composites have been investigated as lightweight structure material platforms for aerospace applications because their strength can be enhanced by adding reinforcement without a significant increase in weight. In this study, the fabrication and characterization of carbon nanotube (CNT) reinforced glass fiber composites are demonstrated to enhance the tensile strength of longitudinal direction along the glass fibers. Due to the reinforcement of CNT in epoxy layers, the yield strength of fiber/epoxy composites is enhanced by about 10 %. Furthermore, using scanning electron microscopy, analysis of fracture surfaces shows that mixed CNT in epoxy layers acts as necking agents between fractured surfaces of fiber/epoxy; thereby, initiation and evolution of crack across fiber composite can be suppressed by CNT necking between fractured surfaces.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.429-437
• /
• 2020

In this study we quantified the long-term change in discharge against precipitation in a forested watershed and investigated how the growth of forest trees influences these changes. We found a proportional relationship between precipitation and discharge for each year, and discharge decreased gradually with time. Precipitation and discharge were highest in July and August, and the changes in precipitation, discharge, and runoff rate did not always coincide, given that high runoff rate was shown in August and September. The monthly coefficient of variation (CV) for discharge was larger than that for precipitation, and the deviation between precipitation and discharge increased gradually. From 2011 to 2017, the gradient of the trend line for the change of total discharge and direct runoff against precipitation decreased, whereas the gradient of the base flow increased in this same time period. A possible explanation is that the water holding capacity of soil deposits increased as the forest soil of the Palgong Mountain watershed developed and the increase of base flow rose with groundwater level together with that of outflow quantity. The coefficient of flood recession was lower in the period 2011 to 2017 than in 2003 to 2010; thus, the reduction of discharge was mitigated and remained steady as time progressed. We conclude from these results that the discharge of surface runoff decreased as tree growth and base flow increased; however, the water yield function of the forest increased gradually.