• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.86-86
• /
• 2003

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.806-807
• /
• 2008

2세대 고온초전도 선재는 전기적, 기계적 특성이 1세대 고온초전도 선재보다 더 우수하지만, 1세대 고온초전도 선재보다 더 높은 교류손실 밀도를 발생시킨다는 단점이 있다. 본 논문에서는 2세대 초전도 선재인 박막형 YBCO CC(Coated Conductor)에서 발생하는 교류 손실을 감소하기 위한 방법으로 선재의 초전도층을 분할하여 단면의 종횡비를 줄이는 방법을 제안하였으며, 실제로 제작 및 특성 측정을 통해 제안된 방법의 타당성을 보였다. 박막형 선재의 초전도층을 분할하기 위해 포토마스킹을 이용한 에칭 방법을 이용하였다. 샘플의 제작을 위해 안정화층이 없는 폭 12mm 의 YBCO CC를 사용하여 샘플의 길이는 15cm로 하고 선재의 분할수를 다르게 하여 각 샘플에 대한 자화 손실과 각 소선의 임계전류를 측정한 후 선재의 전기적 특성 변화를 알아보았다.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.5-8
• /
• 2006

The growth properties of MOD-YBCO films were investigated. To enhance the growth rate of YBCO layer and inhibit the build-up of HF gas during the annealing process in TFA-MOD for YBCO coated conductors the method of low pressure annealing was employed. Total pressure was changed from 700Torr to 1Torr and its effect on growth of YBCO films was compared with atmospheric one. The lower Pressure was effective to control of the pore size in MOD method . Surface morphology of YBCO films processed at low total pres sure was rough and composed of random YBCO (103) grains. But large pores, usually observed at atmospheric process in MOD disappeared and also the number of pores was reduced at low pressure annealing. Also discussed ate the effects of Fluorine-free Y and Cu precursor solution on the development of microstructure. Dense surface me phology and with less and small pores can be provided through controlling Fluorine content.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.135-139
• /
• 2006

We fabricated YBCO coated conductors (CCs) by TFA-MOD process and evaluated microstructure, texture formation, and critical temperature ($T_c$) and current ($I_c$). YBCO precursor solution was synthesized using metal-trifluoroacetates and dip coated on $LaAlO_3$(LAO) substrate. The phase formation and microstructure was characterized by X-ray diffraction and scanning electron microscopy (SEM) and the degree of texture was evaluated by pole-figure analysis. The CC was heat-treated in various calcining temperatures ($370^{\circ}C-460^{\circ}C$) and firing temperatures ($750^{\circ}C-800^{\circ}C$). As fired at $775^{\circ}C$ for 4h, the CC had the highest $T_c$ of 89.5 K and $I_c$ of 40 A/cm-width ($J_c=2.0\;MA/cm^2$). Microstructural observation indicated that the YBCO film was dense and homogeneous and had a strong cube texture without formation of second phase and its in-plane full-width at half-maxima; $5.2^{\circ}$ under optimum condition.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.82-82
• /
• 2002

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.4
• /
• pp.1-6
• /
• 2007

We describe methods for depositing high temperature superconducting films on textured metal tapes by reactive co-evaporation (RCE). We discuss how RCE can be used to deposit on moving tape in a continuous fashion in a Garching-style process. Results are presented on films deposited by RCE at Los Alamos on IBAD-MgO textured tapes. The performance achieved, attaining over 500A/cm-width in self-field at 75.5 K, is competitive with the best results obtained by other processes for coated conductors. Tape production throughput is critical for the economics of the process and high deposition rates achieved in RCE are attractive for this. We present a detailed cost analysis model for HTS deposition using an RCE Garching process. The results indicate that HTS deposition can cost $<$5/kA{\cdot}m$ in a scaled up manufacturing environment.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.93-93
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.84-84
• /
• 2005

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.27-31
• /
• 2007

For large power applications, multi-stacked tape should be used because single tape is limited in flowing demanded current capacity. Besides insulation between layers is needed for safe operation because high voltages are generated in those applications. In this study, considering those situations which mentioned above, we measure the magnetization loss in several multi-stacked tape samples having the different insulation thicknesses and various packing numbers of tape by external magnetic field having various incidence angles.