• Transactions on Electrical and Electronic Materials
• /
• v.5 no.6
• /
• pp.211-214
• /
• 2004

We developed a new systematic calibration procedure which was applied to the calibration of the diffusivity, segregation and TED model of the indium impurity. The TED of the indium impurity has been studied using 4 different groups of experimental conditions. Although the indium is susceptible to the TED, the RTA is effective to suppress the TED effect and maintain a steep retrograde profile. Like the boron, the indium shows significant oxidationenhanced diffusion in silicon and has segregation coefficients at the $Si/SiO_2$ interface much less than 1. In contrast, however, the segregation coefficient of indium decreases as the temperature increases. The accuracy of the proposed technique is validated by SIMS data and $0.13 {\mu}m$ device characteristics such as $V_{th}$ and $Id_{sat}$ with errors less than $5 \%$ between simulation and experiment.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1999

The microstructures of top seed mult processde $\textrm{YBa}_2\textrm{Cu}_3\textrm{O}_7$.$\delta$ single crystal were studied. Although shape of the seed was not faceted. the growth shape of Y123 single crystal was faceted. It was observed that Y211 phases were trapped in specific spaces of the faceted region. From the microstructural investigation. it was suggested that the segregation of Y211 is due to the difference of growth rates in crystal direction. When a single crystal was grown by the single seed with stepped multi surfaces. a microstrue was grown from multi-seed. The microstructure show the possibility of multi-seed growth. Corn kernel like structure without Y211 phase was observed and seemed to be formed by the diffusion reaction between Y211 phase in crystal and liquid wetted on the crystal. the diagonal line on Y123 crystal was observed that it was formed by the corn kernel like structure.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.43-46
• /
• 1999

The microstructure of Top Seed Milt-Processed $YBa_{2}$$Cu_{3}$$O_{7-\delta}$ single crystal was studied. It was presumed that the segregation of Y211 is due to the difference of growth rates between a, b axis and c axis in crystal direction. Corn kernel lide structure which was grown by the diffusion of Y211 was observed. At the near corner of the seed crystal, the diagonal line on Y123 cry crystal is formed by the corn kernel like structure.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.211-218
• /
• 2018

This study examined the reliability and revision necessity of concrete standard specifications based on the comparisons with test data obtained by using domestic artificial lightweight aggregates and the contents specified in different foreign specifications including ACI 211.2, ACI 213, ACI 301, JASS 5 and CEB-FIP. To achieve the continuous particle distribution of domestic fine lightweight aggregates, the partial addition of natural sand with the maximum size of 2.5mm was required. To control the segregation and excessive bleeding in the fresh lightweight concrete, the current limitations on the water-to-binder ratio and unit water content need to be modified using lower values. In particular, a rational mixture proportion approach of lightweight concrete needs to be established for the targeted requirements of initial slump, 28-day compressive strength, air content and dry unit weight. Ultimately, significant revision of the concrete standard specifications is required considering the characteristics of domestic artificial lightweight aggregates.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.211-215
• /
• 2007

Hybrid thin film nanostructures composed of metal nanoparticles (NPs) and self-assembled polymer films with different spatial distributions of NPs were analyzed by optical waveguide spectroscopy (OWS). Specifically, the dielectric constants were calculated using effective medium theory for the incorporation of 1 vol% Au NP into the block copolymer (BCP) films having a cylindrical nanodomain morphology. Three cases were considered: uniform distribution of NPs in the film; selective distribution of NPs only in the cylindrical domains; and segregation of NPs to the center of the cylindrical domains. The optical waveguide spectra derived from the calculated dielectric constants demonstrate the feasibility of experimentally distinguishing the composite nanostructures with different inner morphologies in the hybrid metal NP-BCP nanostructures, by the measurement of the dielectric constants using OWS.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.211-214
• /
• 2015

$Cr_2O_3$ nanoparticles were prepared via one-step reactive laser ablation of Cr in oxygen. The metastable $CrO_2$ phase was obtained through the subsequent oxidation of $Cr_2O_3$ nanoparticles under $O_2$ with gas pressures of up to 40 MPa. The as-prepared $Cr_2O_3$ nanoparticles are spherical or rectangular in shape with sizes ranging from 20 nm to 50 nm. High oxygen pressure annealing is effective in producing meta-stable $CrO_2$ from as-dried $Cr_2O_3$ nanoparticles, and the $Cr_2O_3$ nanoparticles exhibit a weak ferromagnetic behavior with an exchange bias of up to 11 mT that can be ascribed to the interfacial exchange coupling between uncompensated surface spins and the antiferromagnetic core. The $Cr_2O_3/CrO_2$ nanoparticles exhibit an enhanced saturation magnetization and a reduced exchange bias with an increasing faction of $CrO_2$ due to the elimination of uncompensated surface spins over the $Cr_2O_3$ nanoparticles when exposed to a high pressure of $O_2$ and/or possible phase segregation that results in a smaller grain size for both $Cr_2O_3$ and $CrO_2$.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.203-211
• /
• 1992

Fracture behavior and martensite substructure of Ni-36.5at.%Al alloy were investigated with the addition of vanadium which is known as scavenging element of grain boundary. The fracture surfaces were examined by scanning electron microscopy and the EDX spectrometer was applied for composition analysis of fracture surfaces. The substructure of martensite was studied by transmission electron microscopy. By addition of vanadium, fracture surfaces show mixed modes of intergranular and transgranular fracture and more Al content is found on the grain boundaries. For Ni-36.5at.%Al alloy, the planar faults observed in the martensite plates are the internal twins. By increasing the vanadium content, the modulated structure with stacking faults and dislocations dominates while the twinned martensite disappears. The stacking fault is determined to be extrinsic due to the substitution of V for Al. It is concluded that the segregation of sulfur on the high-energy state stacking fault area suppresses the intergranular fracture.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.205-211
• /
• 1997

The magnetic properties change which was induced by addition of small amount of Ni into Cr underlayer in CoCrTa/ CrNi thin film deposited by electron beam evaporator was investigated. The additional Ni element was found to be beneficial for incease in the coercivity of the thin film deposited at the room temperature. The origin of coercivity increase was elucidated by crystal orientation and microstructure investigation using XRD and AFM respectively. It was found that the grain size were increased by Ni addition. The coercivity of the film with CrNi underlayer is lower than that of film with Cr underlayer when prepared with higher substrate temperature. This result may be originated with the increase in grain size. When film was deposited at 280 $^{\circ}C$ substrate temperature, Cr segregation in grain boundary is found to be the other factor for determining coercivity value.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.200-211
• /
• 1993

Somatic hybrids of Pleurotus florida ASI 2016 and Pleurotus ostreatus ASI 2018 were obtained by protoplast fusion. The 40 fusants($P1{\sim}P40$) was examined for the yield on fermented and pasteurized rice straw in a tray. The carpophore yield of them were showed as the range of $27.0{\sim}155.2$, based on parental values of 100(ASI 2018), The pilei of fusants between orange white colored P. florida and dark grey colored P. ostreatus had mixed colors in the young stage. Other breeding programmes were performed to improve new varieties with high yield and good quality. A new oyster mushroom variety, Wonhyeongneutaribeosus(P72), was developed at the Agricultural Sciences Institute, Rural Development Administration in 1990. This P.florida-ostreatus-ostreatus hybrid P72 was selected from 38 protoplast fusion products($P41{\sim}P78$) between P.florida-ostreatus recombinant P5-M 43-arg rib and P. ostreatus ASI 2-13-0 2001-19-pro orn. The yield indexes of 38 hybrids ranged $40.5{\sim}152.7$ compared with the parental values of 100(ASI 2001). Hybrid P72 was characterized by the large fruiting bundle of semispherical shape with long stipe and by the small and circular pileus, resulting in lower harvesting cost. A significant increase in carpophore production was observed in somatic hybrids of protoplasts due to heterosis. A comparision of hybrid with parents P72 was made using isozyme analysis. The esterase banding patterns could be characterized by new bands in the hybrids. Seven fusion products of four crosses between P.florida ASI 2016 and P. ostreatus ASI 2018 were analysed with respect to the distribution of progenies and segregation of gene markers by random basidiospore analysis. Segregation of alleles should yield progeny of four genotypes in a Mendelian ratio of 1 : 1 : 1 : 1 for prototrophs, auxotrophs of one parental type, auxotrophs of the other parental type, and auxotrophic recombinants, respectively. However, five fusants of them did not detect one parental, P.ostreatus, type. Basidiospores could yield progeny of 16 genotypes in the cross of one of the recombinant P5-M43-arg $rib{\times}P. ostreatus$ ASI 2-13-pro orn but the segregants of three fusants were not detected clearly. The allele ratio of loci could be expected 1 : 1 : 1 : 1 for arg, rib, pro and orn. The ratio, however, would be changed to 4 : 1 : 1 : 1 with increasing proportion of argo In almost all the fusants, prototrophic recombinants were recovered in large numbers against auxotrophic markers. Parental genotypes were recovered with the recombinant progeny amounting to $38.68{\sim}99.56%$. The analysis provides proof of heterokaryosis and strong evidence for haploidy of vegetative nuclei, a sexual cycle consisting of nuclear fusion and meiosis.