• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.559-569
• /
• 2012

In this paper, the X($1{\times}2$, 10.525 GHz) and K($3{\times}6$, 24.15 GHz) bands patch array antenna having single feed line for radar detector applications is proposed. The left side of the proposed array antenna is X band array antenna and the right is K band array antenna. Two array antennas with two stubs located in the front of antennas are fed through one transmission line. If the array antennas which have the different resonance frequency are fed by one transmission line using general T-junction, it interferes each other and the array antenna lost its character. Therefore, to prevent these interferences, two stubs using open and short property of stub are designed. First of all, the performances of array antenna weren't changed when each array antennas were connected with the stub and in the end, it is found out that it was the same when the two array antennas were combined and feed through the one transmission line. The measured gain at X band is 6.47 dBi and measured gain at K band is 13.07 dBi. The experimental results agree well with the simulated ones.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.33-39
• /
• 1979

The resonance frequency of the slot-line resonator in the shielding box is analyzed. It is verified experimentally that an X-Band oscillator may be realized by the resonator in the microstrip circuit mount as a shielding cavity, and by shunt-connecting the IMPACT diode on the slot-line, And the oscillating power can be coupled with the microstrip by the coupling aperure on the opposite surface of the microstrip by the coupling aperure on the opposite of the substrate of the microstrip cirsuit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.21-30
• /
• 1973

A snaked-line array antenna is investigated for the use of high gain antenna at X-band frequency by studing its attenation constant and the radiation pattern. Attenuation constant which is equivalent to the radiation resistance varies roughly as a function of the square of sinh$\theta$a where sin$\theta$a corresponds to the amplitude of sinusoidal form of snaked-line. The directivity is determined by the number of snaked-line antennas and the periodic units of a snaked line.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.175-177
• /
• 2018

항해용 X-band 레이더는 물표탐지를 통한 안전한 항해를 목적으로 널리 사용되고 있다. 해당 목적을 위해서는 노이즈로 간주되는 해면반사파(sea clutter)신호는 제거하여 사용하지만, 본 연구에서는 노이즈로 간주되는 해면반사파 신호를 활용하여 파랑에 대한 정보(파고, 파주기, 파향 등)를 파악하는데 활용하였다. 레이더에서 방출되는 전자기파는 펄스의 길이에 의해 탐지할 수 있는 영역이 제한되어 있다. 펄스의 길이가 짧을수록 짧은 주기의 파랑을 계측할 수 있다는 장점이 있지만, 거리의 제약으로 인하여 대형선박의 실 운항시에는 활용하기 어려운 현실적인 딜레마가 있다. 본 연구에서는 삼성중공업, 오션알앤디가 개발한 WaveFinder 시스템을 이용하여 기존 short pulse 모드 뿐만아니라 midium pulse 에서의 활용 가능성을 실제 시운전을 통해 확인하였다.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.197-200
• /
• 2000

In this paper, we present a novel methodology for a wideband HTS antenna of finite length placed on a dielectric substrate. A methodology used in this work is based on a moment-method techniques with Green function singularity when the field point is in the source triangle. The designed resonance frequency of our HTS antenna is 11.85 GHz. The return loss is -26 dB. The bandwidth obtained is a significant 10.6 %. Experimental measurements for a HTS antenna designed in X-band are shown to agree well with the simulated prediction.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.27-34
• /
• 1995

In this paper, an X-band TDRO(transistor dielectric resonator oscillator) is designed and experimented with the oscillator constructed. Design of the TDRO is carried out by deriving analycally the coupling parameters between a microstrip line and a dielectric resonator. The coupling parameters take account of the relations among substrate material, ground plane, metallic boundaries surrounding the resonator, distance between a microstrip line and a resonator. Two criteria, external quality factor and coupling coefficient, have been chosen in order to evaluate the performance of the TDRO designed. TDRO studed in this paper may be useful for the application of a microwave system requiring a stable and effective oscillator frequency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.39-45
• /
• 1978

This paper described on the varactor tuning Gunn oscillator for X band. Analyzed the coplanar 2 post case using the dyadic Green's function then derived the obstacle network for the incident TE10 mode. For the electronical tuning, used the tuning varactor diode which has a high speed dynamic response characteristic and high Q. Oscillation frequency, switching mode, and stable oscillation point were calculated by the computer simulation. In the expriments, switching mode was occurred at 18 mm, 32.5 mm of the short tcircuit position, respectively. The general characteristics of the varactor tuning Gunn oscillator were abruptly changed by the moving of the short circuit and the variation of the bias voltage.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.127-130
• /
• 2015

ITU-R has conducted a studies for the frequency allocation to the maritime mobile satellite service (MMSS) in the 7375 - 7750 / 8025 - 8400 MHz under WRC-15 agenda item 1.9.2. In order to allocate a certain frequency bands to the new service, compatibility between new service and the existing services is ensured taking into account protecting the existing services form interference of new service. In this paper, we present current studies results of the frequency sharing studies between new allocation to MMSS and the existing services in the ITU-R. In addition, some proposals for allocating the 7/8 GHz frequency bands to MMSS are also considered for efficient spectral utilization with respect to preparing WRC-15.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1982-1990
• /
• 1994

We implemented a PLDRO(Phase Locked Dielectric Resonator Oscillator) using the concept of the feedback property of PLL(Phase Locked Loop) for Ku-band(10.95-11.70 GHz). The conventional approaches to a PLDRO design use varactor diode tuning method.. But in theis paper, the PLDRO has the advantage of the frequency sensitivity to changes in the supple voltage of the oscillating device without the frequency-variable part by varactor diode voltage-control. and uses a SPD(Sampling Phase Detector) for phase-comparision. The PLDRO is composed of the DRO phase-locked to the reference signal of UHF band by using a SPD for high frequency stability and can be available for European FSS(Fixed Satellite Service) at 10.00GHz. The PLDRO generates the output power of 8.67 dBm at 10.00 GHz and has a phase noise of -81 dBc/Hz at 10 kHz offset from carrier. The hamonic and spurious characteristics have -42.33 dBc and -65dBc respectively. This PLDRO has much better frequency stability, lower phase noise, and more economical effect for a satellite system than conventional DRO.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.504-514
• /
• 2014

An MMIC multi-function chip with a low DC power consumption for an X-band active phased array radar system has been designed and fabricated using a 0.5 ${\mu}m$ GaAs p-HEMT commercial process. The multi-function chip provides several functions: 6-bit phase shifting, 6-bit attenuation, transmit/receive switching, and signal amplification. The fabricated multi-function chip with a compact size of $16mm^2(4mm{\times}4mm)$ exhibits a gain of 10 dB and a P1dB of 14 dBm from 7 GHz to 11 GHz with a DC low power consumption of only 0.6 W. The RMS(Root Mean Square) errors for the 64 states of the 6-bit phase shift and attenuation were measured to $3^{\circ}$ and 0.6 dB, respectively over the frequency.