• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.535-539
• /
• 1999

This paper presents the 2nd excitation control of the wound-rotor induction motor with Fly-wheel. In the wound-rotor induction motor, the primary power is controlled by AC excitation which used the secondary power conversion. Based on theory, this paper describes the dynamic response analysis of the wound-rotor induction motor with Fly-wheel and Simulation using MATLAB is performed to verify the proposed control method.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.462-465
• /
• 2001

The wound induction motor can provide high starting torque and reduced starting current simultaneously by inserting large scale resistor. And this technique is one of the well known methods among the induction motor starting methods and generally used for heavy load starting such as Crain and Cement factories. The conventional PI controller has been widely used in industrial application due to the simple control algorithm and in general, PI controller is used for control of current, torque, position, and speed for the wound induction motor drive system. However, the system may result in poor performance since sensors have to be used, which in turn is limited by the environmental condition. Recently, to overcome these problems, many sensorless vector control methods for the wound induction motor have been studied. This paper presents MRAS method with on-line stator resistance tuning for sensorless vector control of the wound induction motor drive. In conventional MRAS method, in low frequency, stator resistance variation can result in poor performance. Therefore, to overcome several shortages of the conventional MRAS caused by parameter variation and enhance robustness of the sensor less vector control, this paper investigates a MRAS method with on-line stator resistance tuning for sensorless vector control of the wound induction motor. The validity and effectiveness of the proposed method is verified through digital simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.166.2-166
• /
• 2001

This paper is concerning a vector control of wound-rotor induction motor from the secondary side. When the wound-rotor induction motor is vector controlled from the secondary side, it has the possibility that the vector control can be accurately done because the disturbance input, that is, primary voltage and all state variables, that is, primary currents and secondary currents can be detected. We consider it is deserve research that the vector control of wound-rotor induction motor from the secondary side, because there is the merit that we can reduce the inverter capacity to on the order of half of the motor capacity when we choose twice of the synchronous speed to the rated speed, though there is the problem of the brush maintenance. In this paper, the vector control method of wound-rotor induction ...

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.5
• /
• pp.887-893
• /
• 2011

The purpose of this study was to investigate the wound healing effects of Danggwieumja (DG), which is commonly used for skin inflammation, skin wound, skin pruritus, and chronic hives etc. The 1.5 cm ${\times}$ 1.5 cm full-thickness skin wound was induced to two groups, DG (n=16) and Saline (n=16) group. The DG extract and Saline were orally administrated daily for 15 days after skin wound induction. Then, the body weight of rats and the congestion indices were daily measured for 15 days after skin wound induction. The wound contractions and epithelizations were also measured. The wound contractions were daily measured for 15 days after wound induction and wound epithelizations were measured for 8 days from day 7 after wound induction. For evaluating angiogenesis, the immunoreactivities of vWF and VEGF protein were measured immunohistochemistrically on day 15. In results, although the percentage increases in mean body weight of rats in the DG and Saline groups hve no significant differences, DG extract decreased the time of wound healing and congestion around wound, and improved wound contraction and epithelization. The contraction percentage of DG group was significantly increased on day 5 (P<0.05) and day 7 (P<0.01) than that of Saline group. DG group showed significant increase of wound epithelization on day 7 (P<0.05) as compared to Saline group. Moreover, DG extract reduced the inflammation of skin dermis and promoted the growth of vascular vessels of dermis by accelerating vascular endothelial growth factor (VEGF) protein. These results suggest that DG has the beneficial effects on skin incision wound and can be the suitable wound healing agent for various surgical wounds.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.34-37
• /
• 2000

This paper presents the power compensation by wound-rotor induction motor with a Fly-wheel. In the wound-rotor induction motor the primary power is controlled by AC excitation which used the secondary power conversion. Based on theory this paper describes the dynamic response analysis of the would-rotor induction motor with Fly-wheel. Simulation and experimental results are performed to verify the proposed control method

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.469-471
• /
• 2005

Wind farms employs induction generators which are two type, one is Squirrel cage for fixed speed wind turbines and the other is Wound induction generator (doubly fed induction generator DFIG) for variable speed wind turbines. this paper describes grid connection scheme of wind power system using two type induction generators and simulation results show the characteristics of two type induction generators.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.595-602
• /
• 2015

The rotor configuration of the brushless doubly fed induction generator (BDFIG) plays an important role in its performance. In order to make the magnetomotive force (MMF) space vector in one set rotor windings to couple both magnetic fields with different pole-pair and have low resistance and inductance, this paper presents a novel wound rotor type for BDFIG with low space harmonic contents. In accordance with the principles of slot MMF harmonics and unequal element coils, this novel rotor winding is designed to be composed of three-layer unequal-pitch unequal-turn coils. The optimal design process and rules are given in detail with an example. The performance of a 700kW 2/4 pole-pair prototype with the proposed wound rotor is analyzed by the finite element simulation and experimental test, which are also carried out to verify the effectiveness of the proposed wound rotor configuration.

• The Plant Pathology Journal
• /
• v.20 no.4
• /
• pp.258-263
• /
• 2004

Ripe fruit of pepper (Capsicum annuum) showed resistance to Colletotrichum gloeoporioides, but unripe fruit was susceptible. We previously isolated the PepTLP gene that induced in both unripe and ripe fruit by fungal infection and wound, and only in ripe fruit by jasmonic acid (JA) treatment. To examine further regulation of PepTLP, the action of specific agonist and antagonists of known signaling effector on the .PepTLP expression by fungal infection, wound, and JA was investigated. A similar dephosphorylation event negatively activated all the PepTLP expression in the ripe fruit by fungal infection, wound, and JA. The induction of PepTLP expression by wound is differentially regulated via phosphorylation and dephosphorylation step during pre- and post-ripening, respectively. In addition, the induction of PepTLP expression in the ripe fruit by wound and JA is differentially regulated via dephosphorylation and phosphorylation step, respectively. Only both wound and JA treatment has synergistic effect on the PepTLP expression in the unripe fruit. Both SA and JA treatments on the unripe fruit, and both wound or JA and SA on the ripe fruit could not do any effect on the expression of PepTLP. These results suggest that the induction of PepTLP expression is differentially regulated via complex regulatory system against fungal infection, wound, and JA treatment during pre- and post-ripening of pepper fruit.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.326-329
• /
• 1997

This paper deals with the generating power analysis of wound rotor induction generator according to the rotor excitation for use of DFIG (Doubly Fed Induction Generator) system in wind power generation as a part of renewable energy development. In this way, the generating power of wound rotor induction generator can be achieved for a wide range wind speed of supersynchronous and subsynchronous speed.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.223-228
• /
• 2007

This paper deals with the secondary excited induction generator applied to random wave input generation system. As it is preferred to stabilize the output voltage and frequency in the constant level, microcomputer controlled CSI connected to the secondary windings supplies the secondary current with slip frequency. For testing this method, the input torque simulator is constructed, according to the power flow analysis. The experimental and numerical results show the advantage of secondary excited induction generator system for the random input wave generation system.