• 제목/요약/키워드: Work Types

검색결과 3,113건 처리시간 0.033초

1인가구의 일·여가 유형에 따른 행복수준 (The Level of Happiness According to the Types of Work and Leisure in Single-person Households)

  • 권안나
    • 가족자원경영과 정책
    • /
    • 제25권4호
    • /
    • pp.15-30
    • /
    • 2021
  • 본 연구는 취업 1인가구의 일·여가 유형에 따라 행복수준에 영향을 미치는 자원을 파악하고, 이를 보다 효율적으로 관리할 수 있는 방안을 제시하고자 하였다. 1인가구는 성별, 연령 등 각기 다른 인구통계학적 특성을 가질 뿐 아니라 각자 가지고 있는 자원이 다르므로 단순히 개별적인 대상으로 바라보는 것이 아닌, 보다 통합적인 시각에서 복잡하게 얽힌 체계로 바라볼 필요가 있다. 이에 본 연구에서는 선행연구 고찰을 통해 1인가구를 복잡한 환경 속에서 존재하는 유기체로 보면서, 환경과 계속적으로 상호작용하는 인간생태학적 관점을 적용하여 연구모형을 설계하였다. 1인가구의 행복수준에 여가자원, 인프라자원, 사회활동자원, 제도자원이 영향을 미칠 것이라는 가정 하에 연구가설을 제시하였다.

타워크레인 텔레스코핑 작업의 풍속 및 하중에 대한 구조 안전성 연구 (A Study on the Structural Safety of Tower Crane Telescoping Work according to Wind Speed and Load)

  • 정성룡;이도근;백신원;신상연
    • 한국안전학회지
    • /
    • 제36권1호
    • /
    • pp.9-17
    • /
    • 2021
  • This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

남성 소비자가 근무 시 착용하는 의복에 대한 만족과 직업 만족도 (Correlation between Work Attire Satisfaction and Job Satisfaction for Male Consumers)

  • 이지인;이규혜
    • 복식
    • /
    • 제63권3호
    • /
    • pp.166-175
    • /
    • 2013
  • The attire of businesspersons has a significant impact on their social status and career. In accordance with the norms of the work place, the types of office attire are diversified. This research was conducted to determine the relationship between the work role of men and their attire, and how satisfaction with their work attire influences their job satisfaction. This study classifies work attire into three categories: uniform, suit, and freestyle. Data from 268 respondents were analyzed, and four work attire satisfaction factors were extracted: symbolic, quality, role function, and aesthetic factors. The group members wearing uniforms displayed a high level of satisfaction with regard to symbolism, role function, and quality; those wearing suits displayed a high level of satisfaction with regard to aesthetics; and those wearing freestyle displayed a high level of satisfaction with regard to role function and aesthetics. Overall, satisfaction with work attire was the highest in the freestyle group. For people wearing uniforms and suits, symbolism, quality, and aesthetics had a significant influence on overall satisfaction, whereas for those wearing freestyle, symbolism had a negative influence and quality had a positive influence on overall satisfaction. To conclude, work attire satisfaction had a greater effect on the job satisfaction of the men in uniforms and suits than on those wearing freestyle.

공동주택 마감공사 중요도 기반 작업지연 요인 분석 (Delay Factors Based on the Importance of Finish Work in Apartment Construction Project)

  • 이승훈;이상효;김주형;김재준
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
    • /
    • pp.125-129
    • /
    • 2010
  • The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

  • PDF

병원 위탁급식 종사원의 직무특성이 일-가정 갈등과 삶의 질에 미치는 영향 - 운영형태의 조절효과 - (Impact of Job Characteristics of Employees on Quality of Work Life in Hospital Contract Foodservice - Focus on Mediating Effect of Operating Types -)

  • 홍기옥
    • 한국식생활문화학회지
    • /
    • 제33권1호
    • /
    • pp.26-35
    • /
    • 2018
  • This study conducted an empirical analysis of the effects of job characteristics on work-family conflict relation and quality of life, as well as moderating effects in accordance with operation type, by targeting 245 dietitian/cooks working for contract foodservice companies. The results of this study are as follows. First, the autonomy and feedback had negative (-) effects on work-family conflict while functional diversity had positive (+) effects on work-family conflict. Job identity and job importance had no relation with work-family conflict. Second, work-family conflict had negative (-) effects on job satisfaction, work-family relation, job support, general happiness, and job environment while having positive (+) effects on job stress. Third, in all paths except for the path with effects of work-family conflict on job stress, there were no differences between the group of shops operating 365 days and the group of shops operating 5 days a week. It would be helpful to the effective operation of human resources by emphasizing the necessity of differentiated management for companies with shops operating 365 days and shops operating 5 days a week, as well as managing employees' job characteristic factors, work-family conflict, and even quality of life.

가정과 직장 간 갈등이 창업 경영 직무만족에 미치는 영향 (Impacts of Conflicts Between Families and Work Places to Startup and Management)

  • 강승구;변상해
    • 벤처창업연구
    • /
    • 제10권5호
    • /
    • pp.197-208
    • /
    • 2015
  • 본 연구는 직장인들의 가정과 직장에서의 갈등과 성격이 직무만족에 미치는 영향을 분석하여 직장인들의 직무만족 향상을 위한 지원제도의 발전을 제안하고자 하는 것이다. 이를 위하여 직장인 225명을 대상으로 설문을 실시하였다. 연구결과 첫째, 직장인들의 가정-직장갈등과 직장-가정갈등은 모두 통계적으로 직무만족에 부(-)의 상관관계가 있음을 확인하였으며, 직무만족의 하위요인에서는 직무환경만족을 개인가치만족보다 더 크게 인식하는 것으로 나타나 개인의 가치관적인 추구보다는 직무자체가 더 큰 비중을 차지하는 것으로 나타났다. 둘째, 가정과 직장에서의 갈등은 서로 영향을 주고받는 쌍방향의 순환적 인과관계로 구성되어 있으며 선행연구와 같은 결과를 나타내었다. 셋째, 가정 직장갈등이 직무만족에 미치는 영향은 에니어그램 성격유형에 따라 유의미한 크기의 차이가 있는 것으로 나타났으며, 전체 직무만족과 하위변인인 개인가치만족에는 사고중심형이, 직무환경만족에는 행동중심형이 영향력의 크기가 높은 것으로 나타났다. 본 연구의 결과 모든 직장인들의 가정과 직장에서의 갈등해소와 직장에서의 직무만족 향상을 위하여 직장인과 그들의 가족을 위한 근로자 심리상담지원프로그램인 EAP(Employee Assistance Program)를 포함한 물질과 정신의 토탈복지 지원정책의 시행, 성격교육과 성격코칭 프로그램 시행 그리고 기업 상담프로그램 도입을 제안한다.

  • PDF

관종별 도서관 사서의 직무환경요인과 직무만족도의 상관성 연구 (A Study on Correlation between Work Environment Factors and Job Satisfaction of Librarians Working in Different Types of Libraries)

  • 김종찬
    • 한국도서관정보학회지
    • /
    • 제43권2호
    • /
    • pp.137-155
    • /
    • 2012
  • 본 연구는 국 공립대학도서관, 사립대학도서관, 전문대학도서관, 지방자치단체 소속 공공도서관을 선정하여 관종별 도서관 사서들의 직무만족도의 차이점을 측정 비교 분석하였다. 측정항목으로 10가지 직무만족 요인을 선정하여 전체적인 사서의 직업만족도와 직무만족, 고용만족, 승진제도 만족, 업무분장만족, 보수제도 만족, 복무제도 만족, 시설환경 만족, 교육훈련 만족, 후생복지 만족, 인간관계에 대한 만족 요인을 비교 분석 하였다. 첫째, 전체적인 사서의 직무만족도는 5점 척도 만점에 3.940으로 비교적 높은 만족도를 보였으며, 관종별로는 사립대학 도서관, 전문대학 도서관, 공공도서관, 국 공립대학 도서관 순으로 나타났다. 둘째, 직무만족요인에 선정된 10가지 항목에 대한 전반적인 관종별 만족도 순위는 교육훈련, 직업, 복무제도, 인간관계, 고용제도, 업무분장, 시설환경, 보수제도, 후생복지, 승진제도 만족 순으로 측정되었다.

초.중등학교 교사의 학교급식 만족도에 대한 위탁운영 및 직영 형태간 비교 (Comparisons of Teachers' Satisfaction with School Lunch Program in Middle and Elementary Schools run by Foodservice Management Type)

  • 이정원;박양자;박영숙;이미숙
    • 대한지역사회영양학회지
    • /
    • 제2권3호
    • /
    • pp.406-416
    • /
    • 1997
  • Teacher's satisfaction with school lunch programs run by foodservice(FS) management types were surveyed with questionnaire at 5 middle and 4 elementary schools. The 88 middle and 104 elementary school teachers who participated and schools' FS management were of 5 types : self/conventional, contracted/conventional, contracted/commissary and contracted/dosirak delivery. Most teachers knew correctly their schools' present FS management types and thoroughly understood the main reasons for needing school lunch program with proper nutrition, better taste and balanced diets in addition to the first reason its less work than preparing homelunches. Teacher's satisfactions with their present school FS were high in self/conventional and contracted/conventional and was very low in contracted/commissary and contracted/ dosirak Taste, hygiene, nutrition and dining facilities in turn were pointed out to be improved : firstly hygiene in the self and firstly taste in the contracted. Particularly dining-rooms were found to have narrow space, uncomfortable chairs and tables, unclean, and having unpleasant smells. Teachers observed that the overall students' food habits such as eating more various foods and better table manners through that school lunch programs, particularly the self-managed types were improved. Conclusively most teachers emphasized school lunch programs to be continued and preferred self-managed types and contracted/conventional types as the second best in having less work to manage, better, taste, nutrition and hygiene, less cost and better nutrition education in turn. And they thought school founders should handle the finances needed to newly establish or repair the school FD facilities, otherwise provided with the partial aid of student's parents.

  • PDF

자동차 쇼크업소바 제조사업장의 작업자 노출 유해인자의 종류 및 노출수준의 경시적 변화 (Types of Hazardous Factors and Time-trend of Exposure Levels from the Working Environment at a Shock Absorber Manufacturing Facility)

  • 나규채;문찬석
    • 한국산업보건학회지
    • /
    • 제28권4호
    • /
    • pp.393-405
    • /
    • 2018
  • Objective: This study examines the types of hazardous factors in the working environment and the time-trend for their exposure levels over 10 years (2007 to 2016). Study Design and Method: The types of hazardous factors and exposure levels were drawn from the 19 measurement reports on the working environment over 10 years at a shock absorber manufacturing facility. Risk assessment of the types of factors and time-trend of exposure levels were evaluated using the factors and exposure levels. Results: A total of 34 hazardous factors were evaluated. The types were noise, 15 organic compounds, seven kinds of acid sand alkalis, eight kinds of heavy metals, and three other compounds. Special management materials used were nickel, hexavalent chrome, and sulfuric acid. Human carcinogens (1A) used were trichloroethylene, nickel, and sulfuric acid. There were six types of substances belonging to the IARC's 2B (body carcinogens) classification or higher, including, methyl isobutyl ketone, ethyl benzene, and trichloroethylene. No detection was found for 627 out of the 2065 total measurements in 19 exposure survey reports, representing 30.4%. Organic solvents, acid and alkali products, and heavy metals showed continuous low exposure concentrations. Noise, welding fumes, and the evaluation of mixed solvents show a gradual decrease in geometric mean and maximum over the time-trend of 10 years. Conclusions: In the case of a shock absorber manufacturing facility, the hazardous factors of noise and the evaluation of mixed solvents still indicate high concentrations exceeding the exposure limits and necessitate reduction studies. These two factors and welding fumes showed a continuous decrease in their ten-year tendency. Organic compounds, acids/alkalis, and heavy metals were managed smoothly in a work environment of continuous low concentrations.

서서 일하는 작업에서의 정맥류 발생에 대한 연구 (A Study of Varicose Veins in Prolonged Standing at Work)

  • 이윤근;임상혁
    • 한국산업보건학회지
    • /
    • 제20권3호
    • /
    • pp.139-146
    • /
    • 2010
  • Recent studies suggest that prolonged standing at work is associated with varicose veins (VV). The objective of this study was to analyze the differences of VV risk in terms of work types in casino dealers and hotel service workers. Symptoms of VV were evaluated using a self-reported questionnaire from 2,092 participants, and muscle fatigue in the lower legs were evaluated using surface electromyography. The shift rate of median frequency in Gastrocnemius was -30.0% among the casino dealers working in prolonged static standing posture, and - 14.3% among the casino dealers sitting during working time. After adjusting age, gender, smoking, and family history of VV, the risk ratio of VV was 3.67(95% CI 2.03-6.59) in group I (prolonged standing and occasional walking at work), 6.29(95% CI 3.48-11.35) in group II (prolonged standing, occasional walking and heavy lifting at work), and 8.07(95% CI 4.51-14.43) in groupIII(prolonged static standing at work). In conclusion, prolonged standing at work may be a work related risk factor of VV.