• 제목/요약/키워드: Wiener-Hopf Method

검색결과 10건 처리시간 0.021초

응용시스템에 강건한 Wiener-Hopf 방정식 (Wiener-Hopf Equation with Robustness to Application System)

  • 조주필;이일규;차재상
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.245-249
    • /
    • 2011
  • 본 논문에서 등가의 Wiener-Hopf 공식을 제안한다. 제안된 알고리듬은 입력신호들이 직교하는 경우 TDL 필터의 가중치 벡터와 오차를 동시에 가질 수 있게 된다. 등가의 Wiener-Hopf 방정식은 최소 평균 자승 오차 방식에 근여 이론적으로 분석이 되었다. 제안된 알고리듬의 성능 결과는 원래 Wiener-Hopf 방정식의 성능과 동일함을 확인할 수 있다. 결론적으로 제안된 방식은 격자 필터가 적용되는 경우 TDL 필터 계수를 가지게 된다. 게다가 새로운 비용함수가 제안되어 더욱 우수한 적응신호처리 분야에서의 발전을 보일 것으로 기대된다.

A Novel Equivalent Wiener-Hopf Equation with TDL coefficient in Lattice Structure

  • Cho, Ju-Phil;Ahn, Bong-Man;Hwang, Jee-Won
    • Journal of information and communication convergence engineering
    • /
    • 제9권5호
    • /
    • pp.500-504
    • /
    • 2011
  • In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. The new algorithm was applied into the identification of an unknown system for evaluating the performance of the proposed method. We compared the Wiener-Hopf solution with the equivalent Wiener-Hopf solution. The simulation results were similar to those obtained in the theoretical analysis. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

MMSE based Wiener-Hopf Equation

  • Cho, Juphil;Lee, Il Kyu;Cha, Jae Sang
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제4권1호
    • /
    • pp.18-22
    • /
    • 2012
  • In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

등가의 Wiener-Hopf 방정식을 이용한 LMS 알고리즘에 관한 연구 (Research on the Least Mean Square Algorithm Based on Equivalent Wiener-Hopf Equation)

  • 안봉만;황지원;조주필
    • 한국통신학회논문지
    • /
    • 제33권5C호
    • /
    • pp.403-412
    • /
    • 2008
  • 본 논문은 등가의 Wiener-Hopf 방정식의 해를 LMS 알고리즘을 이용하여 구할 수 있는 방법과 격자필터에서 직접적으로 TDL 필터의 계수를 구할 수 있는 방법을 제안한다. 이를 위해 격자필터를 이용하여 생성한 직교입력 신호를 등가의 Wiener-Hopf 방정식에 적용하여 그 해를 최소평균자승 알고리즘을 이용하여 순환적으로 구하는 방법을 보인다. 이와 같은 경우 기존에는 오차와 regression 계수를 순환적으로 구할 수 있는데 반하여 본 논문에서는 오차와 TDL 필터의 계수를 순환적으로 구할 수 있는 장점이 있다. 또한 제안한 알고리즘의 수렴적 특성을 이론적으로 고찰하였다. 그 결과는 전통적 해석과 유사하게 나타남을 알 수 있었다. 성능 평가 결과를 통해 제안한 알고리즘이 매우 우수한 성능을 나타내고 있음을 확인하였다.

2자유도 위너-호프 제어기법을 이용한 BTT 유도탄의 자동조종장치 설계 (Design of an Autopilot for the BTT Missile using 2DOF Wiener-Hopf Methods)

  • 민덕기;이종성;박기헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 B
    • /
    • pp.569-572
    • /
    • 1999
  • This paper presents a method for designing an autopilot of the BTT missile using 2DOF Wiener-Hopf control technique to improve tracking performance. Linear controllers are designed based on the linearized models which are obtained from the nonlinear missile dynamic equations at various operating points. The gain scheduling technique is used to implement the final autopilot. A simulation on the flight of missiles is carried out through the use of 6DOF equation program including exact nonlinear equations of the missile and the variations of aerodynamic variables in order to check applicability of the suggested method in real situation.

  • PDF

위너-호프 제어기법을 이용한 BTT 유도탄의 자동조종장치 설계 (Design of an Autopilot for the Bank-to-Turn Missile using Wiener-Hopf Methods)

  • 민덕기;박기헌
    • 전자공학회논문지S
    • /
    • 제36S권6호
    • /
    • pp.45-56
    • /
    • 1999
  • 본 논문에서는 추종 성능을 향상시키기 위해 표준모델의 2자유도 위너-호프 제어 기법을 이용하여 BTT유도탄의 자동조종장치를 설계하였다. 유도탄의 비선형 방정식으로부터 여러 동작점에 대한 선형화 모델을 구하여 선형 제어기를 설계하였으며 최종 자동조종장치는 설계된 제어기들을 이득 계획 기법을 이용하여 구성하였다. 실제 적용성을 검증하기 위하여 유도탄의 정확한 비선형 방정식과 공력 계수의 변화 등을 포함하는 6 자유도 방정식 프로그램을 이용하여 유도탄의 비행 동작에 대한 모의실험을 수행하였다.

  • PDF

면외변형하의 압전재료에 대한 침투 쐐기균열 (A Permeable Wedge Crack in a Piezoelectric Material Under Antiplane Deformation)

  • 최성렬;박재학
    • 대한기계학회논문집A
    • /
    • 제39권9호
    • /
    • pp.859-869
    • /
    • 2015
  • 횡등방성 압전재료에 기하학적 비대칭인 쐐기균열문제를 해석하였다. 기계적 집중면외하중과 전기적 집중 면내하중이 쐐기표면 점에 작용하고 있고, 반면에 균열면 한점에는 기계적 집중하중만 작용한다. 균열면은 침투형 얇은 슬릿으로 가정하여, 전기변위의 수직성분 및 전위가 균열면을 가로질러 연속으로 두었다. Mellin 변환을 사용하여 문제를 수식화하고, Wiener-Hopf 식을 유도하였다. 이 식을 풀므로써 폐형으로 주어지는 해를 얻었다. 임의 균열길이나 경사각, 쐐기각에 대해서도 적용이 가능한 응력 및 전기변위 강도계수를 구하였다. 장의 강도계수들은 전기적 하중에는 무관하고, 전기변위강도계수는 응력강도계수만의 함수로 표현되었다. 전기장 강도계수는 영으로 계산되었다. 또한 에너지방출률을 얻었다. 이 해는 중첩에 의하여 임의로 분포하는 전기기계하중문제에 대한 해를 제공하는 기본해로 사용될 수 있다.

$H_2 / H_{\infty}$ 혼합 기법을 이용한 2자유도 PI 제어기의 설계 (Design of Two-Degree-of-Freedom PI Controllers using the Mixed $H_2/H_{\infty}$ Methods)

  • 조용석;박기헌
    • 전자공학회논문지B
    • /
    • 제33B권6호
    • /
    • pp.12-22
    • /
    • 1996
  • A numerous designs of PI controllers have been suggested to solve out trade-off between tracing and regulating problems. We constructed the PI controller system with two-degree-of-freedom that is more analytic and a better approach to a practical one. In the conventional H$_{2}$ design of optimal PI controllers, the cost function includes only the plant output terms due to the divergent problems. Since the platn input temr is not considered in PI controller design, occasionally, the plant input thends to be either very large or saturated. To solve the prior mentioned problems, we employed a mixed $H_2/H_{\infty}$ method that combines the H$_{2}$ design method to decide optimal parameters of PI controller and the $H_2/H_{\infty}$ design method to minimize the maximum amplitude of plant input. The calculation time of the H$_{infty}$ norm was considerably reduced by the simple scalar function obtained by the wiener-hopf factorization of non-scalar functions.

  • PDF

산란음장 해석을 위한 적분방정식에 대한 연구 (A study of integral equations for the analysis of scattered acoustic field)

  • Wonju Jeon;Lee, Duck-Joo
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.1016-1019
    • /
    • 2002
  • This paper deals with a fundamental and classical scattering problem by a finite strip. For the analysis of scattered acoustic field, a “single” integral equation is derived. Firstly, the complexity by considering the effect of the mean flow is alleviated by the introduction of Prandtl-Glauert coordinate and the new dependent variable. Secondly, the difficulty of solving the resultant strongly-coupled integral equations which always appear in this kind of 3-part mixed boundary value problem is solved by observing some good properties of the functions in complex domain and manipulating the equations and variables for the use of those properties. The solution can be obtained asymptotically in terms of gamma function and Whittaker function. One aim of this study is the improvement of methodology for the research using integral equations. The other is the basic understanding of scattering by a finite strip related to the linear cascade model of rotating fan blades.

  • PDF

$H_2$ 제어 기법을 이용한 Decoupling 제어기 설계 ($H_2$ controller Design of Decoupled Multivariable Feedback Control Systems)

  • 최군호;조용석;박기헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.460-462
    • /
    • 1998
  • In this study, we deal with a multivariable system which its input and output are coupled. This study presents a method for designing a controller which allows a coupled system to be transformed to a decoupled system in a standard model adopting 2DOF controller. And Wiener-Hopf($H_2$) approach is used so that the designed controller can minimize given cost function.

  • PDF